Stefan H DD-WRT Novice
Joined: 02 Dec 2006 Posts: 11
|
Posted: Fri Dec 23, 2022 8:50 Post subject: 5 GHz station Brige WDR4900 + FritzBox 7590 not possible |
|
Hello!
I have tried to connect a WDR4900 V1 (r50931) to a Fritzbox 7590 as a station bridge for many hours.
I have followed the instructions, which are now many years old, as best as I can.
I also compared all settings with a WR1043DN, which works in the same mode without any problems.
Network mode, channel width, etc. tried everything.
After many attempts, I then found that a connection via the 5GHz band is not possible. Even if you want to connect to an open AP, the WDR4900 has not received or sent a single packet even after several minutes.
The channel used is also unknown.
But if you use the 2.4GHz band with exactly the same settings, I immediately have a stable connection - even with a password.
As an AP, the 5 GHz band works without any problems and also scan and find other wifis.
I don't think this is an incorrect setting in wireless -> wireless security, since no packets go in or out.
But what else can it be?
Does anyone have a hint? |
|
egc DD-WRT Guru
Joined: 18 Mar 2014 Posts: 12837 Location: Netherlands
|
|