Posted: Tue Jan 11, 2022 8:29 Post subject: New Build - 01/11/2022 - r48081
Welcome to Marvell r48081 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs. Logs: 'dmesg' 'cat /tmp/var/log/messages' syslog klog, serial, strace, tcpdump, wireshark.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Gremlins: reset & configure manually, not restore a backup. Reboot. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: WRT3200ACM
File/Kernel: ddwrt-linksys-wrt3200acm-webflash.bin, Linux 4.9.296 #3007 SMP Tue Jan 11 03:14:37 +07 2022 armv7l
Firmware: DD-WRT v3.0-r48081 std (01/11/22)
Previous/Reset: r48068 / No
Mode/Status: Gateway, ipv4 and ipv6, 2.4GHz and 5GHz wifi AP, DHCP, Wireguard "server" for external access, DDNS, Port Forwarding, Keep Alive reboot each day
Issues/Errors: None
Clients: iPad Pro, Android Samsung Galaxy S20, 4 ESP devices, Bose SoundTouch, 3 wired PC Windows 10, few Raspberry Pies, Playstation 4, laptops with Win10
Router Name DD-WRT
Router Model Linksys WRT1900ACS v2
Firmware Version DD-WRT v3.0-r48081 std (01/11/22)
Kernel Version Linux 4.9.296 #3007 SMP Tue Jan 11 03:14:37 +07 2022 armv7l
update- browser-waterfox,I switched directly from the first partition in the original software to the current version of ddwrt,after installation rebooted manually ,i use default theme,
Connection Type PPPoE-IPv6 Type DHCPv6 with Prefix Delegation- Avoid DHCP6 client release on Enable, Radvd-Enable All-ok
Port Forwarding ok
Wireless Interface 5GHz-Wireless Mode AP-Wireless Network Mode-AC, Width VHT 80 Mhz-Wireless Channel-36-Short GI, Short Preamble,Single User Beamforming, Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES, Regulatory Domain Romania , all-ok
Wireless Interface 2.4GHz-Wireless Mode AP-Wireless Network Mode-NG, Width VHT 40 Mhz-Wireless Channel-6, Short GI , Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES)all-ok
@kernel-panic69 in the ipv6 section the problem is here, the menu is offset! _________________ Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt
I tried to use the web interface as much as possible, I tried to make a mistake in writing the login data correctly and in the end I no longer have access to the web interface, both wired and wifi side!
I have encountered this problem in the past, but I never thought to restart the PC for the first time to see what happens!
Surprise I have access to the web interface without any problems, it seems that ddwrt sees that a wrong login is being tried several times and somehow blocks that divice from communicating with the router...? _________________ Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt
Joined: 01 Feb 2016 Posts: 54 Location: Oregon, U.S.
Posted: Sat Jul 23, 2022 12:17 Post subject:
Router/Version: WRT1900AC v1 File/Kernel: ddwrt-linksys-wrt1900ac-webflash-r48081.bin / Linux 4.9.296 #3007 SMP Tue Jan 11 03:14:37 +07 2022 armv7l Previous/Reset: ddwrt-linksys-wrt1900ac-webflash-r48208.bin / Hard Reset followed by reflash Mode/Status: Issues/Errors:
Not so much an error, but a incorrect status of hardware in GUI.
Specifically the <Switch Config> tab. Looking at the back of the router on the left hand side, opposite the power switch, going Left to Right the ethernet ports are labeled 4, 3, 2, 1, Wan. In attached screen shot you will see that port 4 and wan port are the only ports active. However there is no cable plugged into port 4, there are only cables plugged into WAN, Ports 1
On the physical router There are five ethernet ports.
Going from Left to Right starting on the port opposite side from the power switch is Port 4, 3, 2, 1, Wan.
In the GUI WAN Port is the only correctly labeled port.
Port 1 is actually physical port 4
Port 2 is physical port 3
Port 3 is physical port 2
Port 4 is physical port 1
Other than that I find 48081 is very stable and reliable.
Joined: 08 May 2018 Posts: 14221 Location: Texas, USA
Posted: Sat Jul 23, 2022 13:36 Post subject:
@TedCheeze: Please consider upgrading to the current release and reporting your findings in that build thread. The cosmetic issue on that page is a given, don't know if it's been fixed since this release, but the page is currently irrelevant on any platform that is not Broadcom. Larger picture focus is on problems in the current release. Thanks for understanding. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net