Posted: Tue Jan 11, 2022 8:28 Post subject: New Build - 01/11/2022 - r48081
Welcome to Broadcom r48081 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• DNScrypt 1.95 can still be used in WebUIbut v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
• VAPs not working at bootare fixed, both unbridged (r40634) and bridged (r47822). Please test, removestartup commands.
• If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
• Broadcom ARM devices if 5 GHz channels are missingvia Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs. Logs: 'dmesg' 'cat /tmp/var/log/messages' syslog klog, serial, strace, tcpdump, wireshark.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Gremlins: reset & configure manually, not restore a backup. Reboot. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Router Model: Netgear R7000
Firmware Version: netgear-r7000-webflash.bin
Kernel Version: Linux 4.4.298 #4930 SMP
Reset: no
Operating Mode/Setup: Gateway / AP
Status: Works well. Previous issue with Smartdns not reading custom configuration fixed, thanks! Smb does not work, no access to smb shares from MacOs or Windows. Smb works on 47618 but not on 47976 and forward. _________________ Netgear R7000 on Build 55109
Asus AC-AC68U rev. C1 (AP) on Build 55109
Asus AC-68U rev. A1 on Build 54604
Asus AC-68U rev. A1 on Build 53339
Router/Version: Trendnet TEW811DRU/DD-WRT v3.0-r48081 mini (01/11/22)
File/Kernel: Linux 4.4.298 #4947 Tue Jan 11 04:02:42 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r47925 mini (12/28/21)/no
Mode/Status: Client AP/ Booted ok, Temps: CPU 73.6 °C / WL0 51.6 °C / WL1 57.8 °C
Issues/Errors: none yet, uptime 8 mins
Router/Version: ASUS RT-AC68U rev B1 (TM-AC1900)
File: asus_rt-ac68u-firmware.trx
Kernel: Linux 4.4.298 #4944 SMP Tue Jan 11 03:43:48 +07 2022 armv7l
Previous/Reset: r47976 / No reset, upgraded via GUI (https)
Mode/Status: 1 AP, 3 Client Bridges - all OK, up 3hrs50min
Issues/Errors: Working as configured. Noticed that running a speedtest through fast.com
generates a large number of errors on the Wireless status page. (2.4Ghz)
Thank you BS and all of the other devs who help out to make this firmware great. _________________ ASUS RT-AC3100 AP Merlin 386.12_4
ASUS RT-AC68U Media Bridge/Merlin 386.12_4 (x2)
ASUS RT-AC68U AP r54604
ASUS RT-AC68U Gateway/AP r54604
Edgerouter-4, v2.0.9-hotfix7
Posted: Wed Jan 12, 2022 3:43 Post subject: RT-N66R - WNDR4500v2
Router/Version: RT-N66R
Mode: Gateway
File: dd-wrt.v24-48081_NEWD-2_K3.x-big-RT-N66U.trx
Kernel: Linux 4.4.298 #13642 Tue Jan 11 04:57:39 +07 2022 mips
Status: working -update from 47381 no issues so far
Uptime: 1hr 26min
Temps: WL0 54.5 °C / WL1 52.6 °C
Router/Version: WNDR4500v2
Mode: AP/Switch/Router
File: dd-wrt.v24-48081_NEWD-2_K3.x_giga-WNDR4500V2.bin
Kernel: Linux 4.4.298 #13630 Tue Jan 11 04:42:30 +07 2022 mips
Status: Working -update from 47381 no issues so far
Uptime: 1hr 13min
Temps: WL0 44.3 °C / WL1 46.6 °C - Heatsink added
Both updated within normal downtime. High CPU usage after WebGui was accessible and after about a min dropped to normal on each. The N66R did report 100% with load average of 2.48 mac during boot and WNDR 100% at 1.56 load average. Not seen these spike before so it could be from the build jump from 47381 to 48081. I see nothing out of the ordinary in the logs. _________________ Asus RT-N66R 50841 big
Netgear WNDR4500v2 50841 mega
Firmware: v3.0-r48081 std (01/11/22)
Router/Version: Netgear R7000 Kernel: Linux 4.4.298 #4944 SMP Tue Jan 11 03:43:48 +07 2022 armv7l
Previous: v3.0-r48068 std (01/09/22)
Mode/Status: AP wired and wireless / Up and running for 30 hours
Reset: Soft boot before and after upgrade
Temperatures: CPU 60.2 °C / WL0 45.4 °C / WL1 50.7 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec (500/500 Mbps).
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Posted: Thu Jan 13, 2022 2:49 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r48081 std (01/11/22) Kernel: Linux 4.4.298 #4944 SMP Tue Jan 11 03:43:48 +07 2022 armv7l Mode: Gateway, Wireless AP, Static Leases. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info. Reset: Nope. Previous: 12-30-2021-r47942 Status: Working so far, still testing. Temperatures: CPU 56.4 °C / WL0 49.0 °C / WL1 50.5 °C Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.
Speedtest.jpg
Description:
Speedtest Over 5.8GHz Wireless.
Filesize:
60.17 KB
Viewed:
4378 Time(s)
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
Joined: 26 Mar 2013 Posts: 1856 Location: Hung Hom, Hong Kong
Posted: Thu Jan 13, 2022 12:21 Post subject: DD-WRT BS build 48081 and Asus RT-N
Router/Version:Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r48081 std (01/11/22)
Kernel: Linux 4.4.298 #4948 Tue Jan 11 04:05:17 +07 2022 armv7l
Previous: DD-WRT v3.0-r47822 std (12/09/21)
Mode: WAN @ DHCP, Wireless @ AP
Status: Working (
Not 24/7; Not using IPv6, VAP, VPN, CTF, FA;
DDNS OK; Port-forwarding OK;
Using NAS (ksmbd, minidlna, lighttpd), USB (jffs, opt), Recursive DNS Unbound;
Entware core (CPU: armv71) installed without problem
)
Reset: NO reset during firmware upgrade but cold boot
File:https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2022/01-11-2022-r48081/asus-rt-n18u/asus_rt-n18u-firmware.trx
Problems (updated on 16 Jan 2022)
1. Unbound was still not started using /jffs/etc/unbound.conf in a USB flash drive. However, both LightTPD and ksmbd could use their config files in /jffs/etc/.
2. MiniDLNA was still not started properly.
3. I think there were just too many retries/attempts to start the services listed in the NAS tab.
Firmware Size
From 30515200 (b.31277) to 24711168 (b.33555) = -5804032 bytes
From 24711168 (b.33555) to 27054080 (b.34929) = 2342912 bytes
From 27054080 (b.34929) to 26640384 (b.35531) = -413696 bytes
From 26640384 (b.35531) to 25022464 (b.36995) = -1617920 bytes
From 25022464 (b.36995) to 25427968 (b.37961) = 405504 bytes
< .... snipped ... >
From 25870336 (b.46733) to 25153536 (b.46979) = -716800 bytes
From 25153536 (b.46979) to 25145344 (b.47000) = -8192 bytes
From 25145344 (b.47000) to 25145344 (b.47090) = 0 bytes
From 25145344 (b.47090) to 25149440 (b.47206) = 4096 bytes
From 25149440 (b.47206) to 25153536 (b.47282) = 4096 bytes
From 25153536 (b.47282) to 25128960 (b.47474) = -24576 bytes
From 25128960 (b.47474) to 25128960 (b.47581) = 0 bytes
From 25128960 (b.47581) to 25157632 (b.47692) = 28672 bytes
From 25157632 (b.47692) to 25939968 (b.47822) = 782336 bytes
From 25939968 (b.47822) to 25985024 (b.48081) = 45056 bytes
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Joined: 26 Mar 2013 Posts: 1856 Location: Hung Hom, Hong Kong
Posted: Thu Jan 13, 2022 12:27 Post subject:
wabe wrote:
Smb does not work, no access to smb shares from MacOs or Windows. Smb works on 47618 but not on 47976 and forward.
Was "Access Level" in the Samba settings set to "Restricted"? You might wanna attach a screenshot of your Samba settings.
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
