VLAN on WRT3200

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
wrtusa
DD-WRT Novice


Joined: 10 Jan 2022
Posts: 1

PostPosted: Mon Jan 10, 2022 20:20    Post subject: VLAN on WRT3200 Reply with quote
I am looking to set up 3 VLAN's on my Linksys WRT3200ACM with DD-WRT v3.0-r44715 std (11/03/20).

My goal:
VLAN1 assigned to 192.168.1.x (255.255.255.0)
VLAN2 assigned to 192.168.2.x (255.255.255.0)
VLAN3 assigned to 192.168.3.x (255.255.255.0)

All 3 VLAN's to connect to WAN but cannot see / talk between the VLAN's. This is so I can have trusted, guest and IoT devices separated to different VLAN's.


My setup of the WRT3200ACM is as an access point to the internet via my ISP's router. I have the ethernet plugged from the WRT3200ACM WAN port to LAN on my ISP's router, which is then connected to the internet via ADSL.

Current config of WRT3200ACM:
WAN Connection type: Disabled
Local IP: 192.168.1.2
Subnet mask: 255.255.255.0
Gateway: 192.168.1.1 (the ISP router)
Local DNS: 192.168.1.1 (the ISP router)
Assign WAN Port to Switch: Enabled
DHCP Type : DHCP server
DHCP Server: Enabled
Start IP Address : 192.168.1.129 (Whilst I am working this setup out, I am connected to ISP router with DHCP enabled with IP range of 192.168.1.0 - 192.168.1.128 to avoid conflict but still allows me to be able to readily use the internet)
Use DNSMasq for DNS : enabled
DHCP-Authoritative : enabled
SPI Firewall: disabled & Filter Multicast enabled
Advanced routing > Operating mode: Router

I would like to know the ideal configuration in Setup > Switch confi.
The default is Port W on VLAN2 and Port 1-4 on VLAN 1 ('Assigned to bridge' all already set 'None'). I have attempted to put Port W on VLAN0 and one of the 1-4 ports to Port 2 and then creating bridge via Setup > Networking for each VLAN and a DHCP server to provide the IP based on VLAN, but every time I have to reset and restore from last known good configuration.

Now it looks like this router does not have the ability to do this kind of port based VPN (https://wiki.dd-wrt.com/wiki/index.php/VLAN_Support - 'Only Broadcom based devices support port-based VLAN's, no Atheros or Ralink devices' so vlan tagging would be best. Am I right in thinking this? If so, looking around I cannot find a good instruction on how to use that to set up VLAN tagging via Setup > Networking. Could anyone give any pointers?

Any help much appreciated!
Sponsor
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Mon Jan 10, 2022 20:58    Post subject: Reply with quote
Announcement: Marvell forum FAQ – README

Sticky: How to VLAN tag WAN traffic for ISP on WRT1900AC v1 - SOLVED

Sticky: VLAN success on WRT1900ACSv2, WRT3200ACM, et al.

Please consider upgrading. The router database is not updated.

https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2022/01-10-2022-r48075/linksys-wrt3200acm/

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum