Client for GoPro AP and AP for other devices

Post new topic   Reply to topic    DD-WRT Forum Index -> Advanced Networking
Author Message
HoloLens111
DD-WRT Novice


Joined: 20 Dec 2021
Posts: 4

PostPosted: Mon Dec 20, 2021 23:49    Post subject: Client for GoPro AP and AP for other devices Reply with quote
Hello,

My issue is similiar to this: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=257772
However, most of the helping posts seem to be deleted on that thread.

I got two DD-WRT flashed TP Link WR940N V.6 router and a GoPro Hero 4. The webinterface says its this version: DD-WRT v3.0-r47900 std (12/20/21). However, i flashed "12-20-2021-r47900".

The second router has added the gopro in client mode and i added the local ip adress to a different subnet 192.168.2.2 . DHCP is disabled.

On the main router in "advanced routing" in gateway operating mode i added to the routing table the LAN NET address of the gopro and the gateway adress 192.168.2.2. The router are conntected with LAN cable.

I cant access the gopro when wifi connected to the main router. Do you have an idea?
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12834
Location: Netherlands

PostPosted: Tue Dec 21, 2021 9:07    Post subject: Reply with quote
To give better support it helps if you also tell the buildnumber you are using.

See the forum guidelines with helpful pointers about how to research your router, where and what firmware to download, where and how to post and many other helpful tips:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087

Posts from @eibgrad are unfortunately deleted

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087


Last edited by egc on Tue Dec 21, 2021 12:20; edited 1 time in total
HoloLens111
DD-WRT Novice


Joined: 20 Dec 2021
Posts: 4

PostPosted: Tue Dec 21, 2021 12:11    Post subject: Reply with quote
oh no why did you delete the posts? they seem to fix the problem.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12834
Location: Netherlands

PostPosted: Tue Dec 21, 2021 12:16    Post subject: Reply with quote
What are you talking about I did not delete any posts.
Sad

Edit: I asked @eibgrad to chime in as he is the leading expert in this field Smile

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
HoloLens111
DD-WRT Novice


Joined: 20 Dec 2021
Posts: 4

PostPosted: Tue Dec 21, 2021 18:45    Post subject: Reply with quote
Assigning an ip address to the second router thats within the network of the local host (192.168.1.X) fixed it. It allows to generally access the gopro now. However, there were problems reported to access individual ports of the gopro to receive the livestream which i will check now.
HoloLens111
DD-WRT Novice


Joined: 20 Dec 2021
Posts: 4

PostPosted: Tue Dec 21, 2021 22:22    Post subject: Reply with quote
ok after i did port forwarding on the second router i could also receive the udp livestream from the hololens when connected to the main router. The ip address that needs to be used for port forwarding is the one of the client within the main router network !

best regards!
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 6856
Location: Romerike, Norway

PostPosted: Fri Dec 24, 2021 11:16    Post subject: Re: Client for GoPro AP and AP for other devices Reply with quote
HoloLens111 wrote:
On the main router in "advanced routing" in gateway operating mode i added to the routing table the LAN NET address of the gopro and the gateway adress 192.168.2.2.


The static route will be 192.168.2.0/24 with 192.168.1.X as next hop. where X is the address of the second router.

with full routing, you do not need any portforwards.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Advanced Networking All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum