Posted: Sun Jan 16, 2022 12:01 Post subject: New Build - 01/16/2022 - r48128
Welcome to Broadcom r48128 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• DNScrypt 1.95 can still be used in WebUIbut v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
• VAPs not working at bootare fixed, both unbridged (r40634) and bridged (r47822). Please test, removestartup commands.
• If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
• Broadcom ARM devices if 5 GHz channels are missingvia Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs. Logs: 'dmesg' 'cat /tmp/var/log/messages' syslog klog, serial, strace, tcpdump, wireshark.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Gremlins: reset & configure manually, not restore a backup. Reboot. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 18 Mar 2014 Posts: 12877 Location: Netherlands
Posted: Sun Jan 16, 2022 12:41 Post subject:
Router Model: Linksys EA6900 (XVortex CFE)
Firmware Version: DD-WRT v3.0-r48128M Community Build (01/16/22)
Kernel Version: Linux 4.4.298 #1 SMP Sun Jan 16 11:08:58 CET 2022 armv7l
Upgraded: DD-WRT v3.0-r47985M Community Build (01/06/22)via telnet (update via GUI not possible because nvram is placed on linux partition and not linux2 partition due to Xvortex CFE)
Reset: No, not this time
Configuration: AP, DHCP server, 2,4GHz wireless running with unbridged VAP, 5GHz running, some static leases and some port range forwarding,
OpenVPN client with PBR to keepsolid working
WireGuard client working for site-to-site setup to own server working.
NVRAM size 44K (NVRAM size should not be a problem with the Xvortex CFE)
Status: Up and stable for 2 hours
Errors: none so far
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Sun Jan 16, 2022 12:45 Post subject:
Router/Version: Asus RT-AC66U
File: dd-wrt-#####-Asus_RT-AC66U.trx
Firmware: DD-WRT v3.0-r48128 giga (01/16/22)
Kernel: Linux 4.4.298 #13772 Sun Jan 16 07:06:41 +07 2022 mips
Mode: Gateway
Previous: r48075
Reset?: N
Status: Working
Linksys E2500...used as a WAP
DD-WRT v3.0-r48128 mega (01/16/22)
Linux 4.4.298 #13788 Sun Jan 16 07:25:39 +07 2022 mips
'dd-wrt.v24-48128_NEWD-2_K3.x_mega.bin'
GUI install over r48081
all good
#
Linksys E1200 v2...used as a Client Bridge
DD-WRT v3.0-r48128 mega (01/16/22)
Linux 4.4.298 #13788 Sun Jan 16 07:25:39 +07 2022 mips
'dd-wrt.v24-48128_NEWD-2_K3.x_mega-nv64k.bin'
GUI install over r47644
all good
I must accept the fact that Netgear R6250 is unstable for normal using unbound while warm inside vs deep cold outside in East Canada because I met at least twice strange unstable in the mid-evening, CPU temperatures over 81.4 °C cause reboot or lost, how high it was I cannot record.
So I took back my Buffalo WHR-G300NV2 temply then flashed 01-16-2022-r48128, it works very well.
And yet there is one bug, which I am not sure where the trouble is.
if my linux PC Firefox/Librewolf/Brave/Chromium/... visit https://www.reuters.com normal, but my iPad (iPad OS 15.2.1) use Safari and latest google chrome cannot open www.reuters.com only (the other website are all normal to open) while duckduckgo on iPad can open https://www.reuters.com normally. I tried to define address=/www.reuters.com/13.224.250.65 in DDWRT dnsmasq still cannot fix. My linux drill www.reuters.com and reuters.com are all normal, my WAN is DHCP after cabl e modem, even in ssh mode of DDWRT, nslookup reuters.com and www.reuters.com answered normally.
Back to my R6250 then flashed 01-16-2022-r48128 and reset, that above trouble on iPad to open www.reuters.com in safari/chrome disappeared.
Firmware: DD-WRT v3.0-r48128 std (01/16/22)
Kernel: Linux 4.4.298 #5011 SMP Sun Jan 16 03:54:47 +07 2022 armv7l
Mode: Gateway, Wireless AP, CTF & FA Enabled. NAT/QoS Off
CPU Clock 800MHz without fan
Load Average 0.06, 0.05, 0.02
Temperatures CPU 76.9 °C / WL1 55.8 °C
ctf_fa_cap=1
create ctf proc
attach ctf for eth%d
_ctf_attach:attach eth%d
bind ctf to eth if
_ctf_attach:attach wl0
_ctf_attach:attach wl1
By the way, I must add address=/forum.dd-wrt.com/185.84.6.126 in dnsmasq option to fix/avoid that I usually lost my upload the above contents here for forum.dd-wrt.com, if you also meet.
Router/Version: Netgear R8000
Version DD-WRT v3.0-r48128 std (01/16/22)
File/Kernel: Linux 4.4.298 #5016 SMP Sun Jan 16 06:36:32 +07 2022 armv7l
Previous/Reset: 48081 - no reset
Mode/Status: Gateway/Working
Issues/Errors: FA missing
CTF Enabled but still not detecting FA on the router. Shows BCM4709 on the status page but the chip in the R8000 is BCM4709A0 (not sure if that changes anything for FA detection.
Dec 31 18:00:21 DD-WRT kern.info kernel: robo attach
Dec 31 18:00:21 DD-WRT kern.info kernel: robo id 53012
Dec 31 18:00:21 DD-WRT kern.info kernel: attaching FA
Dec 31 18:00:21 DD-WRT kern.info kernel: CHIPID 53010, rev 5
Dec 31 18:00:21 DD-WRT kern.info kernel: FA Core Detected!
Dec 31 18:00:21 DD-WRT kern.info kernel: no valid FA Mode.
Dec 31 18:00:21 DD-WRT kern.info kernel: attach ctf for eth%d
Dec 31 18:00:21 DD-WRT kern.info kernel: _ctf_attach:attach eth%d
Dec 31 18:00:21 DD-WRT kern.info kernel: bind ctf to eth if
Dec 31 18:00:21 DD-WRT kern.warn kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.164.18 (r692288)
Dec 31 18:00:21 DD-WRT kern.info kernel: switch id 12
Dec 31 18:00:21 DD-WRT kern.info kernel: switch id32 53012
Dec 31 18:00:21 DD-WRT kern.info kernel: b5301x_common: found switch: BCM53012, rev 5
Dec 31 18:00:21 DD-WRT kern.info kernel: b53_robo_cpu_port_upd, pdesc[8].cpu=1
Dec 31 18:00:21 DD-WRT kern.info kernel: bcm_robo_config_vlan_fun vid=1, vlan->members=0x1af, vlan->untag=0xaf
Dec 31 18:00:21 DD-WRT kern.info kernel: bcm_robo_config_vlan_fun ports=0 1 2 3 5 7 8t
Dec 31 18:00:21 DD-WRT kern.info kernel: bcm_robo_config_vlan_fun vid=2, vlan->members=0x110, vlan->untag=0x110
Dec 31 18:00:21 DD-WRT kern.info kernel: bcm_robo_config_vlan_fun ports=4 8
Joined: 21 Sep 2008 Posts: 6 Location: Whistler, CA
Posted: Mon Jan 17, 2022 2:45 Post subject:
Router/Version: WRT600N v1.1
File/Kernel: betas/2022/01-16-2022-r48128/linksys-wrt600n/linksys-wrt600-k3.x.bin
Previous/Reset: r48081 (which had no internet on wireless) / yes
Mode/Status: semi-bricked
Issues/Errors: WebGUI upgrade claimed Upgrade Failed after 5+ min. Did a 30/30/30 and came back with power light flashing, and LAN ethernet light on. Pinged fine but no WebGUI and no response to telnet or SSH. Multiple 30/30/30s did not help. Flashed older firmware with TFTP successfully.
Router/Version: ASUS RT-AC66U B1
File/Kernel: Firmware: DD-WRT v3.0-r48128 std (01/16/22)
Previous/Reset: r47822
Mode/Status: Works well however it seems the 2.4ghz light and power somehow get switched up. Any guidance to configure the LEDs? I know my 5 ghz light never worked properly.
