New Build - 12/23/2021 - r47911

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 4123

PostPosted: Thu Dec 23, 2021 4:53    Post subject: New Build - 12/23/2021 - r47911 Reply with quote
Welcome to Broadcom r47911 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r47900 (mirror)

OpenVPN 2.5.5: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips and scripts. Thanks BS & egc!

Notes:
Experimental for 8MB+ K2.x devices: broadcom_K3X_mipsel32r1. • MIPS @ kernel 4.4. • TP-Link Archer C8 v2, v3 support.
MiniDLNA, CoovaChilli, Privoxy, iperf3, CAKE, FreeRADIUS, dnsmasq, Unbound, Tor, Squid, Asterisk, OpenSSL, BusyBox, SmartDNS, curl, ProFTPD, mac80211
In-kernel Samba (ksmbd 3.4.2+++) guest behavior now selectable. • WSD updateANTFS/NTFS3 kernel mode driver+++
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 fragattack fixed. • Broadcom swconfig supported.
• 'Assign WAN port to Switch' gone, set Connection Type Disabled. • WebUI MAC Filtering (47184-47205). • Sputnik removed.
• 'Ignore WAN DNS' also ignores WAN domain. • Milkfish removed.
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, see UI theme test info thread.
• 401 bad request: Ethernet WebUI -> Wireless -> Basic Settings -> Advanced Settings -> Wireless GUI Access Enable, Save

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
DNScrypt 1.95 can still be used in WebUI but v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
VAPs not working at boot are fixed, both unbridged (r40634) and bridged (r47822). Please test, remove startup commands.
If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
Broadcom ARM devices if 5 GHz channels are missing via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg' 'cat /tmp/var/log/messages', syslog klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Gremlins: reset & configure manually, not restore a backup. Reboot. Search Trac & discuss in forum before opening tickets.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 561

PostPosted: Thu Dec 23, 2021 6:49    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.294 #4782 SMP Thu Dec 23 04:11:41 +07 2021 armv7l
Previous/Reset: DD-WRT v3.0-r47900 std (12/20/21) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + USB Storage + lighttpd (using Entware's php8) + DDNS (custom) + Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2022): https://politepol.com/fd/BU5UpNmf6NRW
easyddup - A simple upgrade/downgrade utility by yoyoma2
Akore
DD-WRT Novice


Joined: 19 Dec 2021
Posts: 9

PostPosted: Thu Dec 23, 2021 14:57    Post subject: Reply with quote
Router/Version: Linksys EA6900 V1.1 (XVortex CFE Version 1.3.0.7)

File/Kernel: Firmware: DD-WRT v3.0-r47911 std (12/23/21) / Linux 4.4.294 #4782 SMP Thu Dec 23 04:11:41 +07 2021 armv7l

Previous/Reset: DD-WRT v3.0-r47900M Community Build (12/20/21) via built in GUI. Note: Had to flash twice for it to take. / No. Not this time.

Mode/Status: Main Router DHCP server / 2.4GHz (N Only) and 5.0GHz (N/AC) USB Storage NAS.

Issues/Errors: USB Port 1 (3.0) does not seem to see attached drive at all. USB Port 2 (2.0) working fine. Speed test page in white. / No errors as of 1 hour up-time.
PaulGo
DD-WRT User


Joined: 01 Dec 2021
Posts: 155
Location: Maryland, United States

PostPosted: Thu Dec 23, 2021 15:26    Post subject: Reply with quote
Router/Version: Netgear R6300v1
Firmware: DD-WRT v3.0-r47911 giga (12/23/21)
File/Kernel: Linux 4.4.294 #13240 Thu Dec 23 05:10:53 +07 2021 mips
Previous/Reset: r47874 No reset
Mode/Status: Router / Working
Issues/Errors: None except IPv6

The IPv6 issue has been posted in another post on this thread. The router cannot get an WAN IPv6 address.
Zyxx
DD-WRT Guru


Joined: 28 Dec 2018
Posts: 515

PostPosted: Thu Dec 23, 2021 23:17    Post subject: Reply with quote
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r47911 std (12/23/21) (prev. DD-WRT v3.0-r47900 std (12/20/21))
Kernel: Linux 4.4.294 #4782 SMP Thu Dec 23 04:11:41 +07 2021 armv7l
Mode: Gateway, SFE disabled, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: 1h25m up, Ok.


Router/Version: Asus RT-N66U
File: dd-wrt.v24-47911_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r47911 big (12/23/21) (prev. DD-WRT v3.0-r47900 big (12/20/21))
Kernel: Linux 4.4.294 #13252 Thu Dec 23 05:26:56 +07 2021 mips
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning
Reset: No
Status: 1h23m up, Ok.
kooper2013
DD-WRT User


Joined: 10 Jan 2013
Posts: 101
Location: DE

PostPosted: Thu Dec 23, 2021 23:57    Post subject: Reply with quote
Router/Version: Asus RT-AC87U
File/Kernel: DD-WRT v3.0-r47911 std (12/23/21) / Linux 4.4.294 #4790 SMP Thu Dec 23 04:56:47 +07 2021 armv7l
Previous/Reset: r47900 / no
Mode/Status: (W)AP, wg-client, DHCP (dnsmasq)
Issues/Errors: Still fishy

Same as yesterday on r47900: No internet, no access to GUI, no ping since 0:00. I have to reboot (cold).

The modem (AVM Fritz!Box) received a new IPv6 prefix at 0:05, not at 0:00. There's nothing at 0:00. DHCP on the Fritz!Box is off. Times on modem and AP are same.
WAN on the AP is off, IPv6 is off, operating mode is 'Gateway'.
ISP provides a dual-stack connection.
I'll try to recursivly find the version which is working (as there is not any reachable log).

As per https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=328895, it might be some nvram value (reset helped @mythz80), but for now I disbled cron (nothing there anyway, can't remember turning it on) and see how it goes. But why on earth should that disable GUI, pings and 2.4G (see my post for r47900)?

_________________
3xBuffalo WLI-H4-D1300
1xBuffalo WZR-D1800H
1xBuffalo WHR-HP-G300N
1xBuffalo WHR-1166D (stock f/w)
1xAsus RT-AC87U
1xAsus RT-AC88U
1xTP710
Ger482
DD-WRT Novice


Joined: 04 Sep 2006
Posts: 21

PostPosted: Fri Dec 24, 2021 2:22    Post subject: Reply with quote
Router Model:Asus RT-AC68U
Firmware Version: DD-WRT v3.0-r47911 std (12/23/21)
Kernel Version:Linux 4.4.292 #4429 SMP
Upgraded from: 12-20-2021-r47900/
Reset: no
Status: Up and stable for 12 hours
running Wireguard-flawless
Errors: none

Thank-You! BrainSlayer and everyone involved
saphirely
DD-WRT User


Joined: 13 Dec 2020
Posts: 190

PostPosted: Fri Dec 24, 2021 16:35    Post subject: Reply with quote
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r47911 std (12/23/21)
Kernel: Linux 4.4.294 #4782 SMP Thu Dec 23 04:11:41 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound, CTF & FA Enabled. NAT/QoS Off
Reset: No
Previous : r47900
Upgrade: Web
Temperatures CPU 80.2 °C / WL0 manuel turn off /WL1 57.0 °C
Load: 0.03, 0.01, 0.00
Uptime 22h

Works normal. Merry Chrismax to all of you.

Memory
Total Available 97% 253612 KiB / 262144 KiB
Free 61% 154084 KiB / 253612 KiB
Used 39% 99528 KiB / 253612 KiB
Buffers 3% 2612 KiB / 99528 KiB
Cached 9% 8844 KiB / 99528 KiB
Active 31% 30792 KiB / 99528 KiB
Inactive 4% 3500 KiB / 99528 KiB
kooper2013
DD-WRT User


Joined: 10 Jan 2013
Posts: 101
Location: DE

PostPosted: Fri Dec 24, 2021 23:37    Post subject: Reply with quote
kooper2013 wrote:
Router/Version: Asus RT-AC87U

Same as yesterday on r47900: No internet, no access to GUI, no ping since 0:00. I have to reboot (cold).


OK after disabling cron in GUI. Survived midnight (0:00) on r47911.
Only check_ps resides in /etc/cron.d (->tmp/cron.d); /usr/tmp/cron.d/check_ps just contains
*/2 * * * * root /sbin/check_ps, date of file 20.12.

Can't find any change on svn related to cron nor check_ps...

Merry Christmas!

_________________
3xBuffalo WLI-H4-D1300
1xBuffalo WZR-D1800H
1xBuffalo WHR-HP-G300N
1xBuffalo WHR-1166D (stock f/w)
1xAsus RT-AC87U
1xAsus RT-AC88U
1xTP710
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 12845
Location: Texas, USA

PostPosted: Sat Dec 25, 2021 1:24    Post subject: Reply with quote
@kooper2013: And everything that relies on check_ps (and process monitor) that goes askew will be because cron is disabled. Is this over wireless or something? It would help to know all the details of the issue and have screenshots of all applicable settings to see where things are going awry.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Pogo - A minimal level of ability is expected and needed...
At some point, people just get plain tired of this place.

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
PeteSL
DD-WRT User


Joined: 01 May 2007
Posts: 88

PostPosted: Sat Dec 25, 2021 16:00    Post subject: Reply with quote
Router/Version: Asus RT-AC3100/DD-WRT v3.0-r47911 std (12/23/21)
File/Kernel: asus_rt-ac3100-firmware.trx(Experimental)/Linux 4.4.294 #4791 SMP Thu Dec 23 05:03:34 +07 2021 armv7l
Previous/Reset: r47900/No
Mode/Status: NAT,CFE,uPNP,No DNS/DHCP/QoS,Wireguard Site-Site client,gn mixed 2.4GHz,nac mixed 5GHz,WPA2-PSK security
Issues/Errors:
6 ports shown (only 4 LAN), physical port 1 shown as port 4 (cosmetic only)
Working well.


Last edited by PeteSL on Mon Dec 27, 2021 11:48; edited 1 time in total
Kruppt
DD-WRT Novice


Joined: 11 Jan 2010
Posts: 11

PostPosted: Sun Dec 26, 2021 0:49    Post subject: Reply with quote
Router/Version: Linksys WRT54Gv8
Firmware: DD-WRT v3.0-r47911 micro (12/23/21)
Kernel: Linux 2.4.37 #67570 Thu Dec 23 03:57:13 +07 2021 mips
Previous: r47900
Reset: No
Mode: Client Bridge
Status: 2hrs uptime
Issues/Errors: No

Router/Version: Linksys WRT54Gv6
Firmware: DD-WRT v3.0-r47911 micro (12/23/21)
Kernel: Linux 2.4.37 #67570 Thu Dec 23 03:57:13 +07 2021 mips
Previous: r47900
Reset: No
Mode: WAP/Switch/DHCP/Dnsmasq
Status: 2hrs uptime
Issues/Errors: None

Router/Version: Netgear WGR614v8
Firmware: DD-WRT v3.0-r47911 mini (12/23/21)
Kernel: Linux 2.4.37 #67556 Thu Dec 23 03:24:19 +07 2021 mips
Previous: r47900
Reset: No
Mode: WAP/Switch
Status: 2hrs uptime
Issues/Errors: None

Router/Version: Motorola WR850G v2
Firmware: DD-WRT v3.0-r47911 std (12/23/21)
Kernel: Linux 2.4.37 #67560 Thu Dec 23 03:30:43 +07 2021 mips
Previous: r47720
Reset: No
Mode: WAP/Switch
Status: 2hrs uptime
Issues/Errors: None
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 6486
Location: Romerike, Norway

PostPosted: Sun Dec 26, 2021 9:38    Post subject: Reply with quote
Router Model: Asus RT-AC66U A1
Firmware Version: DD-WRT v3.0-r47911 giga (12/23/21)
Kernel Version: Linux 4.4.294 #13240 Thu Dec 23 05:10:53 +07 2021 mips
Status: Working
ddwrtfollower
DD-WRT Novice


Joined: 17 Mar 2021
Posts: 16

PostPosted: Sun Dec 26, 2021 16:12    Post subject: Reply with quote
Router Model : Netgear R8000
Previous Firmware Version : DD-WRT v3.0-r47874 std (12/18/21)
No Reset

LAN & WLAN router (DNS, DHCP, NAT, ...), WiFi AP 3 bands OK, nothing else
Up and running correctly!

_________________
Netgear R3700 R8000 Asus AC68 AC5300 AX11000
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5842
Location: Texas

PostPosted: Sun Dec 26, 2021 20:15    Post subject: Reply with quote
finally got around to update this old thang
Linksys E2500 ...used as a WAP
DD-WRT v3.0-r47911 mega (12/23/21)
Linux 4.4.294 #13256 Thu Dec 23 05:33:28 +07 2021 mips
'dd-wrt.v24-47911_NEWD-2_K3.x_mega.bin'
GUI install over r47865 -- twas a good'n also

hope they didn't mind too bad getting kicked off for few minutes when I upgraded just now
I see one is already connected back --- makes nonevermind anyways cause they got the WNR2000v3 to connect to but it can be easily overwhelmed Twisted Evil
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum