Posted: Mon Dec 20, 2021 8:35 Post subject: New Build - 12/20/2021 - r47900
Welcome to Broadcom r47900 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• DNScrypt 1.95 can still be used in WebUIbut v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
•VAPs not working at bootare fixed, both unbridged (r40634) and bridged (r47822). Please test, removestartup commands.
• If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
• Broadcom ARM devices if 5 GHz channels are missingvia Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg' 'cat /tmp/var/log/messages', syslog klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Gremlins: reset & configure manually, not restore a backup. Reboot. Search Trac & discuss in forum before opening tickets.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Mon Dec 20, 2021 12:57 Post subject:
Router Model: Linksys EA6900 (XVortex CFE)
Firmware Version: DD-WRT v3.0-r47900M Community Build (12/20/21)
Kernel Version: Linux 4.4.294 #1 SMP Mon Dec 20 10:24:26 CET 2021 armv7l
Upgraded: DD-WRT v3.0-r47853M Community Build (12/16/21)via telnet (update via GUI not possible because nvram is placed on linux partition and not linux2 partition due to Xvortex CFE)
Reset: No, not this time.
Configuration: AP, DHCP server, 2,4GHz wireless running (TurboQAM working), 5GHz running, some static leases and some port range forwarding, NVRAM size 44K (NVRAM size should not be a problem with the Xvortex CFE).
USB/SMB working.
OpenVPN client working.
WireGuard client for site-to-site setup to own WG server and second tunnel to Keepsolid with PBR and Split DNS working.
Status: Up and stable for 2 hours
Errors: none so far
Joined: 08 May 2018 Posts: 14246 Location: Texas, USA
Posted: Mon Dec 20, 2021 20:58 Post subject:
@turbowells:Thank you for asking about this, but I was asked for people to refrain from public comments about syslog entries they do not understand if they do not understand how the firmware works; instead focus on functionality issues, primarily and cosmetic (quite) secondarily. Thanks for understanding.
Quote:
this is intentional. to flush conntrack entries from sfe module and this happens only on time change. in this case the whole firewall rules are loaded otherwise time scheduled filters will not works.
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r47900 std (12/20/21)
Kernel: Linux 4.4.294 #4763 SMP Mon Dec 20 05:24:28 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound, CTF & FA Enabled. NAT/QoS Off
Reset: No
Previous : r47893! (even computer mac defined in dnsmasq options with infinite still cannot connect)
Upgrade: Web
Temperatures CPU 80.2 °C / WL0 manuel turn off /WL1 56.9 °C
Load: 0.04, 0.07, 0.01
Uptime 2h35m
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r47900 (12/20/21)
Kernel: Linux 4.4.294 #13228 Mon Dec 20 06:46:24 +07 2021 mips
Mode: Gateway/AP
Previous: r47893
Reset?: No
Status: Works well
Router/Version: Asus RT-AC68U A1 & C1
File: asus_rt-ac68u-firmware.trx
Firmware: DD-WRT v3.0-r47900 (12/20/21)
Kernel: Linux 4.4.294 #13228 Mon Dec 20 06:46:24 +07 2021 mips
Mode: Gateway/AP
Previous: r47893
Reset?: N
Status: Both versions of router work well _________________ Netgear R7000 on Build 55109
Asus AC-AC68U rev. C1 (AP) on Build 55109
Asus AC-68U rev. A1 on Build 54604
Asus AC-68U rev. A1 on Build 53339
Router/Version: Netgear R7000P
File: netgear-r7000P-webflash.bin
Firmware: DD-WRT v3.0-r47900 (12/20/21)
Kernel: Linux 4.4.294 #4769 Mon Dec 20 06:00:04 +07 2021 armv7l
Mode: Gateway/AP
Previous: r47377
Reset?: Yes
Status: 5G keeps dropping with wrong wifi password (but it is correct.) I still need to do some more trouble shooting. Any suggestions where to look?
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r47900 std (12/20/21)
Kernel: Linux 4.4.294 #4763 Mon Dec 20 05:24:28 +07 2021 armv7l DD-WRT
Previous: DD-WRT v3.0-r47745
Mode/Status: Router / working
Reset: no
Issues/Errors: Working well so far.
Uptime: >9 days
Will update if I run into issues.
Last edited by thunderhead on Wed Dec 29, 2021 22:28; edited 1 time in total
Firmware: v3.0-r47900 std (12/20/21)
Router/Version: Netgear R7000 Kernel: Linux 4.4.294 #4763 SMP Mon Dec 20 05:24:28 +07 2021 armv7l
Previous: v3.0-r47853 std (12/16/21)
Mode/Status: AP wired and wireless / Up and running for 24 hours
Reset: Soft boot before and after upgrade
Temperatures: CPU 58.0 °C / WL0 45.2 °C / WL1 50.2 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec (500/500 Mbps).
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Posted: Tue Dec 21, 2021 15:05 Post subject: Asus RT-N66R Working
Router/Version: Asus RT-N66R
File: dd-wrt.v24-47900_NEWD-2_K3.x-big-RT-N66U.trx
Kernel: Linux 4.4.294 #13224 Mon Dec 20 06:40:14 +07 2021 mips
Previous: dd-wrt.v24-47665_NEWD-2_K3.x-big-RT-N66U.trx
Reset: No (upgraded via web interface with Firefox 95.0.2 (64-bit))
Mode: Gateway Router (with WiFi disabled; separate AP connected via LAN)
Status: All seem to be working so far. Uptime: >25 hours
Temperatures: Not available [WiFi disabled]
Note: Not a bug/problem, just an observational change in operations on adding Static Leases via the web interface. The colon ':' characters are not necessary/acceptable now for the MAC Address field entries. For example, previously the MAC Address was entered as "XX:XX:XX:XX:XX:XX", whereas now just "XXXXXXXXXXXX" is accepted. The following error message will appear in a pop-up if using the previous format:
MAC AddressInvalid Character ":"
This change may have been instituted in earlier builds but I just noticed now when I'd to add a static IP for a newly connected network device. Not an issue, all's well.
I was asked for people to refrain from public comments about syslog entries they do not understand if they do not understand how the firmware works; instead focus on functionality issues, primarily and cosmetic (quite) secondarily.