smart DNS and DnsCrypt

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Advanced Networking
Author Message
hifiboy
DD-WRT Novice


Joined: 18 Nov 2021
Posts: 35

PostPosted: Thu Dec 09, 2021 17:16    Post subject: smart DNS and DnsCrypt Reply with quote
Can smart DNS and DnsCrypt be used together, If yes , how to configure?
Sponsor
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 5009
Location: UK, London, just across the river..

PostPosted: Thu Dec 09, 2021 17:29    Post subject: Reply with quote
good to know what is the reason for...?
If the reason is more security .... due to paranoia...than its a funny case...

just as a joke i would like to find if you can use unbound, stubby, smartDNS and DNSCypt at the same time and be super duper DNS secure... ? Laughing Laughing Laughing

In general they all work on the loop back interface 127.0.0.1, so i don't know how they will correlate together...its probably good to avoid those to work at the same time...

Ive no idea how the embedded SmartDNS will work with the GUI DNScrypt option...the only way to find is to try it it wont hurt...

for more details on encrypted DNS options check the green and red links in my signature or read forum sticky's about unbound, smartDNS encrypted DNS and so...lots of info on the subject...

Im using Stubby... Cool

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 48646 WAP
TP-Link WR1043NDv2 -DD-WRT 48865 Gateway,DNS,AP Isolation,Ad-Block,Firewall,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 -DD-WRT 48886 Gateway,DNS,Ad-Block,Firewall,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 -Gargoyle OS 1.13.0b AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 48886 Gateway,DNS,AD-Block,AP&Net Isolation,VLAN's,Firewall,DoT,Vanilla
Netgear R9000 --DD-WRT 48886 Gateway,DNS,AD-Block,AP Isolation,Firewall,Forced DNS,DoT,2,4Ghz only,Vanilla
Broadcom
Netgear R7000 ---DD-WRT 48886 Gateway,DNS,AD-Block,Firewall,Forced DNS,VLAN's,DoT,VPN
------------------------------------------------------
Stubby for DNS over TLS I DNSCrypt v2 by mac913
hifiboy
DD-WRT Novice


Joined: 18 Nov 2021
Posts: 35

PostPosted: Fri Dec 10, 2021 23:27    Post subject: Reply with quote
Okay
I choose Adguard ip4 DNS from the list of dnscrypt. Is it possible to run ip6 DNS as well? Or you can only choose one kind of DNS from the dnscrypt list?
SurprisedItWorks
DD-WRT Guru


Joined: 04 Aug 2018
Posts: 1328
Location: Appalachian mountains, USA

PostPosted: Sun Dec 19, 2021 21:13    Post subject: Reply with quote
The DNSCrypt links in my sig below show how to set up more than one DNSCrypt server. It's somewhat involved. You can't do it using the drop-down menu.

However, you don't need a separate IPv6 DNS arrangement if your goal is simply to retrieve both IPv4 and IPv6 addresses of websites from the DNS server, as that's the default behavior. There's actually no way to turn that feature off in dnsmasq.

_________________
Six Linksys WRT1900ACSv2 routers on 48141: VLANs, VAPs, NAS, client mode, OpenVPN client (AirVPN), DDNS, wireguard servers and clients (AzireVPN), three DNSCrypt DNS providers (incl Quad9) via VPN clients.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Advanced Networking All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum