Posted: Thu Dec 02, 2021 8:38 Post subject: New Build - 12/02/2021 - r47720
Welcome to Atheros r47720 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg' 'cat /tmp/var/log/messages', syslog klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Gremlins: reset & configure manually, not restore a backup. Reboot. Search Trac & discuss in forum before opening tickets.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Joined: 31 Jul 2021 Posts: 2143 Location: All over YOUR webs
Posted: Thu Dec 02, 2021 10:24 Post subject:
ho1Aetoo wrote:
The bandwidth graph is now very pretty
Not my doing, the filled lines was BS idea/implementation, all though Ive made some fixes to it and a couple more improvements to come in this area.
Previous builds would have broken out of bounds depending on browser font size set.
Linksys EA8500...main gateway
DD-WRT v3.0-r47720 std (12/02/21)
Linux 4.9.291 #553 SMP Wed Dec 1 18:24:58 +07 2021 armv7l
GUI install over r47692
static DHCP
local DNS
OVPN server
ext4 samba share encryption required user/PW only
port range forwarding
unbound
both radios good using VANILLA FW
isolated guest net (using target DNS) for wlan0.1 wlan1.1 VLAN on wired port 4 ---> all via br1
HFSC CAKE
All is very good -- uptime 9:40
#
EA8500...switch / OVPN server / samba share
renamed 'dd-wrt-webupgrade.bin' to 'firmware.bin' & placed in its /tmp directory
flashed itself over r47695
all good --- uptime 5:03
#
Netgear WNDR3700 V4
DD-WRT v3.0-r47720 std (12/02/21)
Linux 3.18.140-d6 #130412 Thu Dec 2 08:49:31 +07 2021 mips
all ok
Joined: 16 Nov 2015 Posts: 5691 Location: UK, London, just across the river..
Posted: Thu Dec 02, 2021 11:02 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r47720 std (12/02/21)
Kernel Version Linux 3.18.140-d6 #130384 Thu Dec 2 07:54:51 +07 2021 mips
update: CLI r47692 > r47720
reset: NO
mode: Gateway
status: Operational 3h+
errors: Nothing new, yet...Thanks BS ! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 51741 WAP
TP-Link WR1043NDv2 -DD-WRT 52054 Gateway/DoT DNS,AP Isolation,Ad-Block,Firewall,Forced DNS,VPN,VLAN
TP-Link WR1043NDv2 -DD-WRT 52189 Gateway/DoT DNS,Ad-Block,Firewall,Forced DNS,x3 VLAN(no-wifi)
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 52189 Gateway/DoT DNS,AD-Block,AP&Net Isolation,x3 VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 52095 Gateway/StubbyDoT/DNS,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 ---DD-WRT 52189 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3 VLAN,VPN (no-wifi)
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby for DNS over TLS I DNSCrypt v2 by mac913
Router/Version: TP-Link Archer C7 v2
File/Kernel: Linux 3.18.140-d6 #130390 Thu Dec 2 08:05:16 +07 2021 mips
Previous/Reset: r47665 / no
Mode/Status: Gateway / working
Issues/Errors: The bandwidth graph is still the same as it used to be.
Just flashed the unit a couple of minutes ago. Will do some more testing the coming days and report issues.
Thanks BS and to everyone who contributed. _________________
1x TP-Link Archer C7 V2.0 r48432 (Primary router at primary location. Former Ziggo repeater)
1x TP-Link Archer C7 V2.0 OpenWrt 21.02.3 (Testing at primary location. Former Ziggo repeater)
1x TP-Link Archer C7 V5.0 r48540 (Secondary router at primary location)
1x TP-Link Archer C7 V5.0 OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WR1043ND V4.0 OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WDR4900 V1.3 (green leds) r48646 (Primary router at secondary location)
1x TP-Link WDR4900 V1.3 (blue leds) OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WDR4900 V1.3 (green leds) OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WDR4900 V1.3 (green leds) OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WDR4900 V1.3 (blue leds) r47925 (Testing at secondary location)
1x Linksys WRT160NL r48494 (Guest network with QoS at secondary location)
1x Linksys WRT54G V2.0 r14929 (Switched off at secondary location)
1x Linksys WRT54GL V1.1 r14929
Joined: 24 Feb 2013 Posts: 1603 Location: Belgrade
Posted: Thu Dec 02, 2021 13:31 Post subject:
there is something else interesting too... New updated wsdd2 supports "network shares on UNIX platforms to apear in Windows File Explorer / Network" but needs 239.255.255.250 and ff02::c, protocol UDP port 3702 to be opened? https://svn.dd-wrt.com/browser/src/router/wsdd2/README.md
(1) Incoming & Outgoing logs show nothing (not a new issue)
(2) Although the build did load the leases file on reboot, I had to uncheck Use JFFS2 for client lease DB, Apply, re-check and Apply, then delete lete /tmp/dnsmasq.leases to get leases to start updating to /jffs.
Our wsdd2 northstar build breaks after changeset 47696 deleted the initialization of DESTDIR which is now empty and still being used. Thanks @egc for finding this. Restoring that line as below fixed it.
