Posted: Tue Nov 30, 2021 4:44 Post subject: NTP client DO NOT work in Repeater Bridge mode
when using wireless repeater bridge mode as the pic shows below
The secondary dd-wrt router won't get the time server.
when i tests in the shell command, it won't resolve the domains.
LIKE: ping www.dd-wrt.com. having nothing reply [/code]
checkd the wiki, probably the point 9 ?
9.Go to the (Setup ->) Advanced Routing tab: Change the Mode to Router
Save and then APPLY settings: allow router to reboot
i don't quite understand, why change to router mode?
Joined: 08 May 2018 Posts: 13160 Location: Texas, USA
Posted: Tue Nov 30, 2021 12:39 Post subject:
Leave NTP server box blank; disable and uncheck everything related to dnsmasq; don't enter a dns server address anywhere. All you should need is the gateway address on the main setup page and *maybe* if it requires it, in the vap configuration. Since we have no idea what router, what build, we can only guess it may be a build that something was askew in. Of course, screenshots of configurations would've helped determine if configuration error. Glad it's working, but I'm sure there was something amiss. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... At some point, people just get plain tired of this place. Because they are tired of bottom-feeders and the same old hat.
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Leave NTP server box blank; disable and uncheck everything related to dnsmasq; don't enter a dns server address anywhere. All you should need is the gateway address on the main setup page and *maybe* if it requires it, in the vap configuration. Since we have no idea what router, what build, we can only guess it may be a build that something was askew in. Of course, screenshots of configurations would've helped determine if configuration error. Glad it's working, but I'm sure there was something amiss.
the problem mighte be missing the default gw routing table.
And i noticed that my dnsmasq service can't be disabled.
[/code]
