Posted: Fri Nov 26, 2021 23:49 Post subject: Determining Boot Order
In addition to changing my partition, I ran into an issue when having a USB drive installed, my router wouldn’t boot into dd-wrt (At least I don’t think so, it didn’t respond to ping or anything)
I have a ProtectLi router using coreboot. They have some documentation on their site on how to change the boot order for various OSes, but I couldn’t deduce something from that. _________________ Google is Spyware
I have had a similar thing happen... Unfortunately I usually have to unplug all usb devices during boot on those systems when doing headless... if you have a monitor connected it is usually trying to boot to the usb device first
So I can see from the link very clearly how to change the boot order in the BIOS.
Really do not understand what is the question here.
This is if I connect a VGA cable. Is there a way to do this via ssh?
No this is via USB/Serial cable
Depends on your hardware which you have not mentioned here.
Some ProtectCLI have a USB port labeled Console - this is a serial port (there is a USB/Serial converter behind it).
So I can see from the link very clearly how to change the boot order in the BIOS.
Really do not understand what is the question here.
This is if I connect a VGA cable. Is there a way to do this via ssh?
No this is via USB/Serial cable
Depends on your hardware which you have not mentioned here.
Some ProtectCLI have a USB port labeled Console - this is a serial port (there is a USB/Serial converter behind it).