roland90
DD-WRT User
Joined: 22 Oct 2015
Posts: 123
|
 Posted: Thu Nov 25, 2021 18:23 Post subject: [SOLVED] XR500 upgrade to DD-WRT r47665 [SUCCESS] |
 |
Hi,
I have just received the new XR500 and I would like to find out
whether switch to DDWRT build 47618 is safe and possible without bad blocks and brick.
I read the install guide for flashing.
Result of command dmesg
| Code: | root@XR500:/# dmesg
atures 4000
Enabling LRO bit for the vap ath1 features 4000
VAP device ath1 created osifp: (d619a4c0) os_if: (d79dc000)
siwfreq
Set freq vap 0 stop send + d79dc000
Set freq vap 0 stop send -d79dc000
Set wait done --d79dc000
WARNING: Fragmentation with HT mode NOT ALLOWED!!
DES SSID SET=on
DES SSID SET=NETGEAR43
ieee80211_ioctl_setparam-5962, IEEE80211_PARAM_NR_SHARE_RADIO_FLAG, MAX_RADIO_CNT = 2su bfee 1 mu bfee 0 su bfer 0 mu bfer 1 impl bf 0 sounding dim 3
su bfee 1 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 3
su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 3
su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 3
device ath1 entered promiscuous mode
ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1
DEVICE IS DOWN ifname=ath1
DEVICE IS DOWN ifname=ath1
br0: port 2(ath1) entered forwarding state
br0: port 2(ath1) entered forwarding state
8021q: adding VLAN 0 to HW filter on device ath1
[wifi1] FWLOG: [23452] WAL_DBGID_SECURITY_ENCR_EN ( )
[wifi1] FWLOG: [23452] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 )
[wifi1] FWLOG: [23484] WAL channel change freq=2412, mode=1 flags=0 rx_ok=1 tx_ok=1
Scan in progress.. Cancelling it
wmi_unified_vdev_down_send for vap 0 (d79e0000)
Scan in progress.. Cancelling it
wmi_unified_vdev_down_send for vap 0 (d79e0000)
isCountryCodeValid: EEPROM regdomain 0x0
ol_regdmn_init_channels: !avail mode 0x7f9001 (0x2) flags 0x2150
ol_regdmn_init_channels: !avail mode 0x7f9001 (0x4) flags 0xa0
ol_regdmn_init_channels: !avail mode 0x7f9001 (0x8) flags 0xc0
ol_regdmn_init_channels: !avail mode 0x7f9001 (0x20) flags 0xd0
ol_regdmn_init_channels: !avail mode 0x7f9001 (0x40) flags 0x150
ol_regdmn_init_channels: !avail mode 0x7f9001 (0x800) flags 0x10080
Switching to Tx Mode-1 Threshold 1000
ol_regdmn_init_channels: !avail mode 0x7f9001 (0x2000) flags 0x20080
ol_regdmn_init_channels: !avail mode 0x7f9001 (0x4000) flags 0x40080
Add VHT80 channel: 5210
Add VHT80 channel: 5290
Add VHT80 channel: 5530
Add VHT80 channel: 5610
Skipping VHT80 channel 5660
Skipping VHT80 channel 5680
Skipping VHT80 channel 5700
Add VHT80_80 channels: 5210 : 5290
Add VHT80_80 channels: 5290 : 5210
Add VHT80_80 channels: 5530 : 5610
Add VHT80_80 channels: 5610 : 5530
Add VHT80_80 channels: 5210 : 5530
Add VHT80_80 channels: 5530 : 5210
Add VHT80_80 channels: 5210 : 5610
Add VHT80_80 channels: 5610 : 5210
Add VHT80_80 channels: 5290 : 5530
Add VHT80_80 channels: 5530 : 5290
Add VHT80_80 channels: 5290 : 5610
Add VHT80_80 channels: 5610 : 5290
set TXBF_SND_PERIOD: value 100 wmi_status 0
WARNING: setting the threshold value > 256 will impact multiclient performance
ath_ioctl: SIOC80211IFCREATE CALLED
wmi_unified_vdev_create_send: ID = 0 Type = 1, Subtype = 0 VAP Addr = 44:a5:6e:5e:c0:f5:
Setting dscp for pdev
__ieee80211_smart_ant_init: Smart Antenna is not supported
Enabling TX checksum bit for the vap ath0 features 4000
Enabling SG bit for the vap ath0 features 4000
Enabling SG bit for the vap ath0 features 4000
Enabling TSO bit for the vap ath0 features 4000
Enabling LRO bit for the vap ath0 features 4000
VAP device ath0 created osifp: (d619e4c0) os_if: (d8314000)
siwfreq
Set freq vap 0 stop send + d8314000
Set freq vap 0 stop send -d8314000
Set wait done --d8314000
WARNING: Fragmentation with HT mode NOT ALLOWED!!
DES SSID SET=on
DES SSID SET=NETGEAR43
ieee80211_ioctl_setparam-5962, IEEE80211_PARAM_NR_SHARE_RADIO_FLAG, MAX_RADIO_CNT = 2su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 1 sounding dim 3
su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 1 sounding dim 3
su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 1 sounding dim 3
su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 1 sounding dim 3
su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 1 sounding dim 3
device ath0 entered promiscuous mode
[wifi1] FWLOG: [23741] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
[wifi1] FWLOG: [23741] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
[wifi1] FWLOG: [23787] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
[wifi1] FWLOG: [23787] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1
DEVICE IS DOWN ifname=ath0
DEVICE IS DOWN ifname=ath0
[wifi1] FWLOG: [24843] WAL channel change freq=2417, mode=1 flags=0 rx_ok=1 tx_ok=1
[wifi1] FWLOG: [24866] WAL_DBGID_XCESS_FAILURES ( OL vap_start +
wmi_unified_vdev_start_send for vap 0 (d78e0000)
OL vap_start -
0xffff, 0x0, 0x0 )
ol_vdev_start_resp_ev for vap 0 (d78e0000)
ol_ath_vap_join: join operation is only for STA/IBSS mode
ol_ath_wmm_update:
su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 1 sounding dim 3
wmi_unified_vdev_up_send for vap 0 (d78e0000)
__ieee80211_smart_ant_init: Smart Antenna is not supported
[wifi0] FWLOG: [25521] WAL_DBGID_SECURITY_ENCR_EN ( )
[wifi0] FWLOG: [25521] WAL_DBGID_SECURITY_MCAST_KEY_SET ( ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3
br0: port 3(ath0) entered forwarding state
br0: port 3(ath0) entered forwarding state
8021q: adding VLAN 0 to HW filter on device ath0
0x1 )
[wifi0] FWLOG: [25552] vap-0 VDEV_MGR_VDEV_START ( 0x1464, 0x2, 0x0, 0x0 )
[wifi0] FWLOG: [25553] WAL channel change freq=5220, mode=10 flags=0 rx_ok=1 tx_ok=1
[wifi1] FWLOG: [25860] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x1, 0x0 )
[wifi1] FWLOG: [25874] WAL channel change freq=2422, mode=1 flags=0 rx_ok=1 tx_ok=1
[wifi1] FWLOG: [25897] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x0, 0x0 )
Scan in progress.. Cancelling it
Band steering events being sent to PID:19170
wmi_unified_vdev_down_send for vap 0 (d79e0000)
br0: port 2(ath1) entered disabled state
[wifi0] FWLOG: [25929] VDEV_MGR_HP_START_TIME ( 0x0, 0x1464, 0xb3b000 )
[wifi0] FWLOG: [25929] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x1 )
[wifi0] FWLOG: [25929] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
[wifi0] FWLOG: [25929] VDEV_MGR_AP_TBTT_CONFIG ( 0x0, 0x1464, 0x0, 0x0 )
[wifi1] FWLOG: [26884] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x1, 0x0 )
[wifi1] FWLOG: [26905] WAL channel change freq=2427, mode=1 flags=0 rx_ok=1 tx_ok=1
[wifi1] FWLOG: [26927] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x0, 0x0 )
[wifi1] FWLOG: [26941] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
[wifi1] FWLOG: [26941] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
br0: port 2(ath1) entered forwarding state
br0: port 2(ath1) entered forwarding state
8021q: adding VLAN 0 to HW filter on device ath1
[wifi1] FWLOG: [28000] WAL channel change freq=2412, mode=1 flags=0 rx_ok=1 tx_ok=1
[wifi1] FWLOG: [28023] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x0, 0x0 )
[wifi1] FWLOG: [29024] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x1, 0x0 )
[wifi1] FWLOG: [29031] WAL channel change freq=2417, mode=1 flags=0 rx_ok=1 tx_ok=1
[wifi1] FWLOG: [29054] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x1, 0x0 )
[wifi1] FWLOG: [30048] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x0, 0x0 )
[wifi1] FWLOG: [30062] WAL channel change freq=2422, mode=1 flags=0 rx_ok=1 tx_ok=1
[wifi1] FWLOG: [30085] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x1, 0x0 )
[wifi1] FWLOG: [31072] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [31093] WAL channel change freq=2427, mode=1 flags=0 rx_ok=1 tx_ok=1
[wifi1] FWLOG: [31116] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x0, 0x0 )
[wifi1] FWLOG: [32096] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x1, 0x0 )
[wifi1] FWLOG: [32123] WAL channel change freq=2432, mode=1 flags=0 rx_ok=1 tx_ok=1
[wifi1] FWLOG: [32146] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x0, 0x0 )
[wifi1] FWLOG: [33120] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x1, 0x0 )
[wifi1] FWLOG: [33154] WAL channel change freq=2437, mode=1 flags=0 rx_ok=1 tx_ok=1
[wifi1] FWLOG: [33177] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x0, 0x0 )
[wifi1] FWLOG: [34144] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x1, 0x0 )
[wifi1] FWLOG: [34184] WAL channel change freq=2442, mode=1 flags=0 rx_ok=1 tx_ok=1
[wifi1] FWLOG: [34208] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x0, 0x0 )
[wifi1] FWLOG: [35168] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x1, 0x0 )
[wifi1] FWLOG: [35214] WAL channel change freq=2447, mode=1 flags=0 rx_ok=1 tx_ok=1
[wifi1] FWLOG: [35237] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x0, 0x0 )
[wifi1] FWLOG: [36192] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x1, 0x0 )
[wifi1] FWLOG: [36246] WAL channel change freq=2452, mode=1 flags=0 rx_ok=1 tx_ok=1
[wifi1] FWLOG: [36269] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x0, 0x0 )
[wifi1] FWLOG: [37216] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x1, 0x0 )
[wifi1] FWLOG: [37276] WAL channel change freq=2457, mode=1 flags=0 rx_ok=1 tx_ok=1
[wifi1] FWLOG: [37299] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x0, 0x0 )
[wifi1] FWLOG: [38240] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x1, 0x0 )
[wifi1] FWLOG: [38307] WAL channel change freq=2462, mode=1 flags=0 rx_ok=1 tx_ok=1
[wifi1] FWLOG: [38330] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x0, 0x0 )
[wifi1] FWLOG: [39264] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x1, 0x0 )
[wifi1] FWLOG: [39338] WAL channel change freq=2467, mode=1 flags=0 rx_ok=1 tx_ok=1
[wifi1] FWLOG: [39361] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x0, 0x0 )
[wifi1] FWLOG: [40288] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x1, 0x0 )
[wifi1] FWLOG: [40368] WAL channel change freq=2472, mode=1 flags=0 rx_ok=1 tx_ok=1
[wifi1] FWLOG: [40392] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x0, 0x0 )
wmi_unified_vdev_down_send for vap 0 (d79e0000)
mlme_create_infra_bss : Overriding HT40 channel with HT20 channel
OL vap_start +
wmi_unified_vdev_start_send for vap 0 (d79e0000)
OL vap_start -
ol_ath_vap_set_param: Now supported MGMT RATE is 1000(kbps) and rate code: 0x43
ol_vdev_start_resp_ev for vap 0 (d79e0000)
ol_ath_vap_join: join operation is only for STA/IBSS mode
ol_ath_wmm_update:
su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 3
wmi_unified_vdev_up_send for vap 0 (d79e0000)
__ieee80211_smart_ant_init: Smart Antenna is not supported
[wifi1] FWLOG: [41313] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x1, 0x0 )
[wifi1] FWLOG: [41402] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
[wifi1] FWLOG: [41402] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
[wifi1] FWLOG: [41414] vap-0 VDEV_MGR_VDEV_START ( 0x9a8, 0x2, 0x0, 0x0 )
[wifi1] FWLOG: [41414] WAL channel change freq=2472, mode=5 flags=0 rx_ok=1 tx_ok=1
[wifi1] FWLOG: [41851] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x1, 0x0 )
[wifi1] FWLOG: [41872] VDEV_MGR_HP_START_TIME ( 0x0, 0x9a8, 0x1388001 )
[wifi1] FWLOG: [41872] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x1 )
[wifi1] FWLOG: [41872] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
[wifi1] FWLOG: [41872] VDEV_MGR_AP_TBTT_CONFIG ( 0x0, 0x9a8, 0x0, 0x0 )
[wifi1] FWLOG: [42438] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [49606] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [52678] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [53702] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x1, 0x0 )
[wifi1] FWLOG: [54126] WAL_DBGID_DEV_RESET ( 0xc01d, 0x444 )
[wifi1] FWLOG: [54165] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x1, 0x0 )
[wifi1] FWLOG: [54165] WAL_DBGID_DEV_RX_TIMEOUT ( 0x1d1e, 0xd36e, 0xba79, 0x1 )
[wifi1] FWLOG: [55750] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [56774] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [58822] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [59846] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [60870] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x4, 0x0 )
[wifi1] FWLOG: [61894] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [62918] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [63942] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [64967] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [65991] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [67015] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [68039] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [69063] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [70087] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [71111] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [72135] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [73159] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [79303] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [81351] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [82375] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [83399] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [84438] WAL_DBGID_DEV_RESET ( 0xc01d, 0x3ff )
[wifi1] FWLOG: [84477] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [84477] WAL_DBGID_DEV_RX_TIMEOUT ( 0x1d1e, 0x149d6, 0x107b0, 0x2 )
[wifi1] FWLOG: [85667] WAL_DBGID_DEV_RESET ( 0xc01d, 0x3e2 )
[wifi1] FWLOG: [85706] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [85706] WAL_DBGID_DEV_RX_TIMEOUT ( 0x1d1e, 0x14ea3, 0x14af2, 0x3 )
[wifi1] FWLOG: [87495] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [89543] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [90567] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [91591] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [92221] WAL_DBGID_DEV_RESET ( 0xc01d, 0x3e6 )
[wifi1] FWLOG: [92260] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [92260] WAL_DBGID_DEV_RX_TIMEOUT ( 0x1d1e, 0x1683d, 0x16128, 0x4 )
[wifi1] FWLOG: [93639] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [94663] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [95498] WAL_DBGID_DEV_RESET ( 0xc01d, 0x3ea )
[wifi1] FWLOG: [95537] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [95537] WAL_DBGID_DEV_RX_TIMEOUT ( 0x1d1e, 0x1750a, 0x171b8, 0x5 )
[wifi1] FWLOG: [96711] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [101832] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [102856] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [103880] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [104904] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [105928] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [106952] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [107976] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [109000] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [111048] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [112072] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [113096] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [114120] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [115144] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [116168] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [118216] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x2, 0x0 )
[wifi1] FWLOG: [120264] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [121288] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x4, 0x0 )
[wifi1] FWLOG: [123336] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x3, 0x0 )
[wifi1] FWLOG: [126408] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x4, 0x0 )
[wifi1] FWLOG: [127432] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x5, 0x0 )
[wifi1] FWLOG: [128456] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x6, 0x0 )
[wifi1] FWLOG: [429957] WAL_DBGID_DEV_RESET ( 0xc01d, 0x3d0 )
[wifi1] FWLOG: [429996] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x6, 0x0 )
[wifi1] FWLOG: [429996] WAL_DBGID_DEV_RX_TIMEOUT ( 0x1d1e, 0x68f85, 0x689fc, 0x6 )
[wifi1] FWLOG: [542399] WAL_DBGID_DEV_RESET ( 0xc01d, 0x3e2 )
[wifi1] FWLOG: [542438] WAL_DBGID_XCESS_FAILURES ( 0xffff, 0x6, 0x0 )
[wifi1] FWLOG: [542438] WAL_DBGID_DEV_RX_TIMEOUT ( 0x1d1e, 0x846be, 0x84085, 0x7 ) |
|
|
roland90
DD-WRT User
Joined: 22 Oct 2015
Posts: 123
|
| Posted: Thu Nov 25, 2021 22:22 Post subject: |
|
dmesg log from DDWRT:
| Code: | [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux (LTO) version 4.9.290 (root@server2) (gcc version 10.0.1 (OpenWrt GCC 10.0.1 r12423-0493d57e04) ) #539 SMP Wed Nov 24 05:34:35 +07 2021
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: Netgear XR500
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122368
[ 0.000000] free_area_init_node: node 0, pgdat c0a2eb40, node_mem_map dda39000
[ 0.000000] Normal zone: 956 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122368 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 12 pages/cpu s18956 r8192 d22004 u49152
[ 0.000000] pcpu-alloc: s18956 r8192 d22004 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121412
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd root=/dev/mtdblock6
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 477200K/489472K available (5120K kernel code, 190K rwdata, 736K rodata, 1024K init, 395K bss, 12272K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xde000000 - 0xff800000 ( 536 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdde00000 ( 478 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0800000 (6112 kB)
[ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
[ 0.000000] .data : 0xc0a00000 - 0xc0a2f818 ( 191 kB)
[ 0.000000] .bss : 0xc0a31000 - 0xc0a93ff1 ( 396 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000009] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000025] Switching to timer-based delay loop, resolution 160ns
[ 0.000275] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000299] pid_max: default: 32768 minimum: 301
[ 0.000424] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000440] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001095] CPU: Testing write buffer coherency: ok
[ 0.001411] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001462] Setting up static identity map for 0x42300000 - 0x4230003c
[ 0.004692] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004892] Brought up 2 CPUs
[ 0.004917] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004930] CPU: All CPU(s) started in SVC mode.
[ 0.020874] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.020903] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.020974] pinctrl core: initialized pinctrl subsystem
[ 0.022201] NET: Registered protocol family 16
[ 0.022262] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.022585] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.051803] cpuidle: using governor ladder
[ 0.054487] qcom_rpm 108000.rpm: could not find pctldev for node /soc/pinmux@800000/i2c4_pinmux, deferring probe
[ 0.104925] msm_bus_fabric_init_driver
[ 0.106733] pps_core: LinuxPPS API ver. 1 registered
[ 0.106751] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.106788] PTP clock support registered
[ 0.109233] clocksource: Switched to clocksource dg_timer
[ 0.113770] NET: Registered protocol family 2
[ 0.114115] IP idents hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.114904] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.114945] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.115001] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.115064] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.115089] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.115289] NET: Registered protocol family 1
[ 0.115340] PCI: CLS 0 bytes, default 64
[ 0.116766] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.126718] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.133458] cryptodev: driver 1.9 loaded.
[ 0.133496] io scheduler noop registered
[ 0.133512] io scheduler deadline registered (default)
[ 0.135526] 1b500000.pci supply vdda not found, using dummy regulator
[ 0.135639] 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.135731] 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.136920] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[ 0.136973] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.137002] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.239610] qcom-pcie 1b500000.pci: link up
[ 0.239811] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.239836] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.239857] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.239874] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.239927] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.240089] pci 0000:00:00.0: supports D1
[ 0.240100] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.240398] PCI: bus0: Fast back to back transfers disabled
[ 0.240719] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.240954] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.242045] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.242625] PCI: bus1: Fast back to back transfers disabled
[ 0.242939] pci 0000:00:00.0: BAR 14: assigned [mem 0x08000000-0x081fffff]
[ 0.242968] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.243100] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.243126] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.243573] aer 0000:00:00.0:pcie002: service driver aer loaded
[ 0.244097] 1b700000.pci supply vdda not found, using dummy regulator
[ 0.244192] 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.244283] 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.245402] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[ 0.245441] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.245466] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.349606] qcom-pcie 1b700000.pci: link up
[ 0.349800] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.349820] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.349837] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.349883] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.350019] pci 0001:00:00.0: supports D1
[ 0.350030] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.350307] PCI: bus0: Fast back to back transfers disabled
[ 0.350654] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.350900] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.352072] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.352668] PCI: bus1: Fast back to back transfers disabled
[ 0.353096] pci 0001:00:00.0: BAR 14: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.353124] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.353258] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.353280] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.353685] aer 0001:00:00.0:pcie002: service driver aer loaded
[ 0.354682] deviceless supply s1b not found, using dummy regulator
[ 0.356464] L2 @ QSB rate. Forcing new rate.
[ 0.356638] L2 @ 800000 KHz
[ 0.356752] CPU0 @ 800000 KHz
[ 0.356764] CPU1 @ QSB rate. Forcing new rate.
[ 0.356893] CPU1 @ 800000 KHz
[ 0.360666] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.361930] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
[ 0.363406] serial8250_init
[ 0.363420] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.364629] msm_serial 16340000.serial: msm_serial: detected port #0
[ 0.364739] msm_serial 16340000.serial: uartclk = 7372800
[ 0.364814] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 170, base_baud = 460800) is a MSM
[ 0.364850] msm_serial: console setup on port #0
[ 1.068433] console [ttyMSM0] enabled
[ 1.073301] msm_serial: driver initialized
[ 1.078660] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xaa
[ 1.080657] nand: Macronix MX30UF2G18AC
[ 1.087080] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.091172] 10 ofpart partitions found on MTD device qcom_nand.0
[ 1.098280] Creating 10 MTD partitions on "qcom_nand.0":
[ 1.104508] 0x000000000000-0x000000c80000 : "qcadata"
[ 1.114443] random: fast init done
[ 1.128966] 0x000000c80000-0x000001180000 : "APPSBL"
[ 1.137368] 0x000001180000-0x000001200000 : "APPSBLENV"
[ 1.138895] 0x000001200000-0x000001340000 : "art"
[ 1.144262] 0x000001340000-0x000001480000 : "artbak"
[ 1.148839] 0x000001480000-0x000004480000 : "linux"
[ 1.217781] 0x0000016c0000-0x000004480000 : "rootfs"
[ 1.283273] mtd: partition "rootfs" set to be root filesystem
[ 1.283306] 0x000004480000-0x000004680000 : "nvram"
[ 1.291594] 0x000004680000-0x00000e680000 : "ddwrt"
[ 1.389873] random: crng init done
[ 1.517614] 0x00000e680000-0x00000ed40000 : "reserved"
[ 1.528820] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 1.529864] m25p80 spi32766.0: unrecognized JEDEC id bytes: 00, 00, 00
[ 1.534952] m25p80: probe of spi32766.0 failed with error -2
[ 1.542203] libphy: GPIO Bitbanged MDIO: probed
[ 1.550743] libphy: Fixed MDIO Bus: probed
[ 1.572968] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 2.422554] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.422583] Ring mode enabled
[ 2.426579] DMA HW capability register supported
[ 2.429625] Enhanced/Alternate descriptors
[ 2.435172] Enabled extended descriptors
[ 2.438133] RX Checksum Offload Engine supported
[ 2.442379] COE Type 2
[ 2.446983] TX Checksum insertion supported
[ 2.449244] Wake-Up On Lan supported
[ 2.453812] Enable RX Mitigation via HW Watchdog Timer
[ 2.458800] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.462447] Ring mode enabled
[ 2.467556] DMA HW capability register supported
[ 2.470588] Enhanced/Alternate descriptors
[ 2.476151] Enabled extended descriptors
[ 2.479109] RX Checksum Offload Engine supported
[ 2.483332] COE Type 2
[ 2.487962] TX Checksum insertion supported
[ 2.490299] Wake-Up On Lan supported
[ 2.494734] Enable RX Mitigation via HW Watchdog Timer
[ 2.499274] i2c /dev entries driver
[ 2.504150] Calibration not found.
[ 2.508102] CPUidle arm: CPU 0 failed to init idle CPU ops
[ 2.510915] GACT probability NOT on
[ 2.515753] Mirror/redirect action on
[ 2.519157] Simple TC action Loaded
[ 2.523640] netem: version 1.3
[ 2.526276] u32 classifier
[ 2.529369] Performance counters on
[ 2.532129] input device check on
[ 2.535792] Actions configured
[ 2.539695] Netfilter messages via NETLINK v0.30.
[ 2.543305] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 2.548334] nf_conntrack_rtsp v0.7 loading
[ 2.554066] xt_time: kernel timezone is -0000
[ 2.557681] ip_set: protocol 6
[ 2.562410] gre: GRE over IPv4 demultiplexor driver
[ 2.565551] nf_nat_rtsp v0.7 loading
[ 2.569946] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.573883] NET: Registered protocol family 17
[ 2.579020] Bridge firewalling registered
[ 2.583286] 8021q: 802.1Q VLAN Support v1.8
[ 2.589545] Registering SWP/SWPB emulation handler
[ 2.591639] registered taskstats version 1
[ 2.605992] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364
[ 2.626134] s1a: Bringing 0uV into 1050000-1050000uV
[ 2.626408] s1b: Bringing 0uV into 1050000-1050000uV
[ 2.630473] s2a: Bringing 0uV into 775000-775000uV
[ 2.635348] s2b: Bringing 0uV into 775000-775000uV
[ 2.644517] trying to register driver cpufreq-dt
[ 2.646395] searching for nvram
[ 2.649377] nvram size = 2097152
[ 3.326935] found nvram at 1E0000
[ 3.368446] no valid UBI magic found inside mtd5
[ 3.368490] hctosys: unable to open rtc device (rtc0)
[ 3.378537] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
[ 3.379664] Freeing unused kernel memory: 1024K
[ 6.754856] Loading modules backported from Linux version v5.10-rc6-0-gb65054597872
[ 6.754889] Backport generated by backports.git v5.10-rc6-1-0-g3a9d70a3
[ 7.207463] ath9k: ath9k: Driver unloaded
[ 7.519125] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 7.519819] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 7.709724] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
[ 8.027565] ath10k_pci 0000:01:00.0: found firmware features ie (8 B)
[ 8.027599] ath10k_pci 0000:01:00.0: Unknown FW IE: 30
[ 8.033070] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 8.038028] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 8.051199] ath10k_pci 0000:01:00.0: firmware ver 10.4-ddwrt-9984-tW-13-6369M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 9bda24da
[ 10.354580] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00000400 board_id 1 chip_id 0 ext_bid_support 0
[ 10.354616] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=0,bmi-board-id=1'
[ 10.363878] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=0,bmi-board-id=1'
[ 10.392831] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:1 crc32 6d0af9a8
[ 10.414072] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 0
[ 10.434580] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 7376
[ 13.794540] ath10k_pci 0000:01:00.0: Init Max Stations to 128
[ 13.870435] ath10k_pci 0000:01:00.0: wmi debug print truncated: 128
[ 13.870466] ath10k_pci 0000:01:00.0: ChipType 1100 ChipTypeID 0 BoardID 2 P 144/144 V 16 K 288 PH 464 T 346 msdu-desc: 2500 sw-crypt: 0
[ 13.875718] ath10k_pci 0000:01:00.0: free: 64312 iram: 23480 sram: 31216
[ 13.888099] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 12:34:56:78:90:12 status 0
[ 13.926921] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 128 raw 0 hwcrypto 1
[ 14.043869] ath: EEPROM regdomain sanitized
[ 14.043882] ath: EEPROM regdomain: 0x64
[ 14.043891] ath: EEPROM indicates we should expect a direct regpair map
[ 14.043911] ath: Country alpha2 being used: 00
[ 14.043919] ath: Regpair used: 0x64
[ 14.044007] initialize fq_codel with 33554432 bytes memory limit
[ 14.044277] ieee80211_txq_setup_flows: set limit to 33554432 bytes
[ 14.055186] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 14.055994] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 14.243420] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
[ 14.243490] ath10k_pci 0001:01:00.0: found firmware features ie (8 B)
[ 14.253139] ath10k_pci 0001:01:00.0: Unknown FW IE: 30
[ 14.259636] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 14.264573] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 14.280232] ath10k_pci 0001:01:00.0: firmware ver 10.4-ddwrt-9984-tW-13-6369M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 9bda24da
[ 16.584827] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00000800 board_id 2 chip_id 0 ext_bid_support 0
[ 16.584859] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=0,bmi-board-id=2'
[ 16.594129] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=0,bmi-board-id=2'
[ 16.603803] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:2 crc32 6d0af9a8
[ 16.633084] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 0
[ 16.653674] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 7376
[ 20.017770] ath10k_pci 0001:01:00.0: Init Max Stations to 128
[ 20.097143] ath10k_pci 0001:01:00.0: wmi debug print truncated: 128
[ 20.097170] ath10k_pci 0001:01:00.0: ChipType 1100 ChipTypeID 0 BoardID 1 P 144/144 V 16 K 288 PH 464 T 346 msdu-desc: 2500 sw-crypt: 0
[ 20.102382] ath10k_pci 0001:01:00.0: free: 64312 iram: 23480 sram: 31216
[ 20.114787] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 00:03:7f:12:34:56 status 0
[ 20.154157] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 128 raw 0 hwcrypto 1
[ 20.247876] ath: EEPROM regdomain sanitized
[ 20.247882] ath: EEPROM regdomain: 0x64
[ 20.247886] ath: EEPROM indicates we should expect a direct regpair map
[ 20.247896] ath: Country alpha2 being used: 00
[ 20.247900] ath: Regpair used: 0x64
[ 20.247949] initialize fq_codel with 33554432 bytes memory limit
[ 20.248067] ieee80211_txq_setup_flows: set limit to 4194304 bytes
[ 21.399279] dwmac1000: Master AXI performs any burst length
[ 21.399345] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 21.404018] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 21.431409] dwmac1000: Master AXI performs any burst length
[ 21.431474] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 21.436057] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 22.489640] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 22.489646] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 23.541109] device br0 entered promiscuous mode
[ 23.628378] dwmac1000: Master AXI performs any burst length
[ 23.628424] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 23.632950] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 23.668795] dwmac1000: Master AXI performs any burst length
[ 23.668840] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 23.673378] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 23.685064] br0: port 1(eth1) entered blocking state
[ 23.689051] br0: port 1(eth1) entered disabled state
[ 23.694592] device eth1 entered promiscuous mode
[ 23.709252] br0: port 1(eth1) entered blocking state
[ 23.710727] br0: port 1(eth1) entered forwarding state
[ 23.715761] device br0 left promiscuous mode
[ 23.723886] device br0 entered promiscuous mode
[ 23.732293] device br0 left promiscuous mode
[ 23.799637] ath: EEPROM regdomain: 0x8348
[ 23.799644] ath: EEPROM indicates we should expect a country code
[ 23.799651] ath: doing EEPROM country->regdmn map search
[ 23.799657] ath: country maps to regdmn code: 0x3a
[ 23.799662] ath: Country alpha2 being used: US
[ 23.799666] ath: Regpair used: 0x3a
[ 23.799674] ath: regdomain 0x8348 dynamically updated by user
[ 23.799734] ath: EEPROM regdomain: 0x8348
[ 23.799738] ath: EEPROM indicates we should expect a country code
[ 23.799744] ath: doing EEPROM country->regdmn map search
[ 23.799750] ath: country maps to regdmn code: 0x3a
[ 23.799756] ath: Country alpha2 being used: US
[ 23.799761] ath: Regpair used: 0x3a
[ 23.799766] ath: regdomain 0x8348 dynamically updated by user
[ 23.852556] ath10k_pci 0000:01:00.0: Core CLK 300
[ 23.852582] ath10k_pci 0000:01:00.0: Mac CLK 150
[ 24.729635] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 26.275968] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00000400 board_id 1 chip_id 0 ext_bid_support 0
[ 26.296461] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 7376
[ 29.660179] ath10k_pci 0000:01:00.0: Init Max Stations to 128
[ 29.734993] ath10k_pci 0000:01:00.0: wmi debug print truncated: 128
[ 29.735018] ath10k_pci 0000:01:00.0: ChipType 1100 ChipTypeID 0 BoardID 2 P 144/144 V 16 K 288 PH 464 T 346 msdu-desc: 2500 sw-crypt: 0
[ 29.740345] ath10k_pci 0000:01:00.0: free: 64312 iram: 23480 sram: 31216
[ 29.752654] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 12:34:56:78:90:12 status 0
[ 38.376672] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00000400 board_id 1 chip_id 0 ext_bid_support 0
[ 38.397167] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 7376
[ 41.761332] ath10k_pci 0000:01:00.0: Init Max Stations to 128
[ 41.836185] ath10k_pci 0000:01:00.0: wmi debug print truncated: 128
[ 41.836210] ath10k_pci 0000:01:00.0: ChipType 1100 ChipTypeID 0 BoardID 2 P 144/144 V 16 K 288 PH 464 T 346 msdu-desc: 2500 sw-crypt: 0
[ 41.841517] ath10k_pci 0000:01:00.0: free: 64312 iram: 23480 sram: 31216
[ 41.853846] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 12:34:56:78:90:12 status 0
[ 41.987759] br0: port 2(wlan0) entered blocking state
[ 41.987781] br0: port 2(wlan0) entered disabled state
[ 41.992114] device wlan0 entered promiscuous mode
[ 42.394224] br0: port 2(wlan0) entered blocking state
[ 42.394251] br0: port 2(wlan0) entered forwarding state
[ 42.494241] ath10k_pci 0001:01:00.0: Core CLK 300
[ 42.494265] ath10k_pci 0001:01:00.0: Mac CLK 150
[ 44.894326] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00000800 board_id 2 chip_id 0 ext_bid_support 0
[ 44.914937] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 7376
[ 48.281511] ath10k_pci 0001:01:00.0: Init Max Stations to 128
[ 48.359511] ath10k_pci 0001:01:00.0: wmi debug print truncated: 128
[ 48.359617] ath10k_pci 0001:01:00.0: ChipType 1100 ChipTypeID 0 BoardID 1 P 144/144 V 16 K 288 PH 464 T 346 msdu-desc: 2500 sw-crypt: 0
[ 48.364718] ath10k_pci 0001:01:00.0: free: 64312 iram: 23480 sram: 31216
[ 48.377178] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 00:03:7f:12:34:56 status 0
[ 53.862102] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00000800 board_id 2 chip_id 0 ext_bid_support 0
[ 53.882716] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 7376
[ 57.248570] ath10k_pci 0001:01:00.0: Init Max Stations to 128
[ 57.326438] ath10k_pci 0001:01:00.0: wmi debug print truncated: 128
[ 57.326463] ath10k_pci 0001:01:00.0: ChipType 1100 ChipTypeID 0 BoardID 1 P 144/144 V 16 K 288 PH 464 T 346 msdu-desc: 2500 sw-crypt: 0
[ 57.331660] ath10k_pci 0001:01:00.0: free: 64312 iram: 23480 sram: 31216
[ 57.344103] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr 00:03:7f:12:34:56 status 0
[ 57.483114] br0: port 3(wlan1) entered blocking state
[ 57.483140] br0: port 3(wlan1) entered disabled state
[ 57.487472] device wlan1 entered promiscuous mode
[ 57.794402] br0: port 3(wlan1) entered blocking state
[ 57.794428] br0: port 3(wlan1) entered forwarding state
[ 58.129959] device eth0 entered promiscuous mode
[ 59.097175] fast-classifier (PBR safe v2.1.6b): starting up
[ 59.097278] fast-classifier: registered
[ 59.303439] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 59.733543] dwmac1000: Master AXI performs any burst length
[ 59.733589] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 59.738068] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 59.747124] device eth0 left promiscuous mode
[ 60.809657] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off |
|
|
