Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r47665 std (11/24/21) (prev. DD-WRT v3.0-r47618 std (11/05/21))
Kernel: Linux 4.4.292 #4453 SMP Thu Nov 18 03:19:29 +07 2021 armv7l
Mode: Gateway, SFE disabled, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: Ok, installed it yesterday. Did not check ksmbd, since the drive is currently not here.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-47665_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r47665 big (11/24/21) (prev. DD-WRT v3.0-r47618 big (11/05/21))
Kernel: Linux 4.4.292 #12600 Wed Nov 24 07:38:58 +07 2021 mips
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Ok, installed it yesterday.
Firmware: DD-WRT v3.0-r47665 std (11/24/21)
Router/Version: Netgear R7000 Kernel: Linux 4.4.292 #4453 SMP Thu Nov 18 03:19:29 +07 2021 armv7l
Previous: v3.0-r47656 std (11/18/21)
Mode/Status: AP wired and wireless / Up and running for 1 1/2 days
Reset: Soft boot before and after upgrade
Temperatures: CPU 59.1 °C / WL0 45.3 °C / WL1 50.6 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec (500/500 Mbps). Nothing unexpected in the syslog.
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Joined: 12 Jun 2007 Posts: 32 Location: Aachen, Germany
Posted: Fri Nov 26, 2021 18:19 Post subject: R7000P
Router Model: Netgear R7000P
Firmware Version: DD-WRT v3.0-r47665 std (11/24/21)
Kernel Version: Linux 4.4.292 #4459 SMP Wed Nov 24 07:10:00 +07 2021 armv7l
File: netgear-r7000p-webflash.bin
Previous: DD-WRT v3.0-r47656 std (11/18/21)
Reset: Yes
Mode: AP 2.4GHz/AP-5GHz/Gateway
Status: Ok
Uptime: ~1 hours
Errors:
- vap on 5GHz not working. WAP 5GHz dropping out. Not so bad as under the previous release but still present. Might be due to the 5 GHz vap problem. 5 GHz vap isn't distributed in the air and also not present under ifconfig.
- On the 2.4 GHz Band wap and vap seem to work fine. Also configureable for vlans.
- vlan seems to be working _________________ |2e4per
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r47665 std (11/24/21)
Kernel: Linux music 4.4.292 #4453 SMP Thu Nov 18 03:19:29 +07 2021 armv7l DD-WRT
Previous: DD-WRT v3.0-r47608
Mode/Status: Router / working
Reset: no
Issues/Errors: Working well so far.
Uptime: 11+ days
Will update if I run into issues.
Last edited by thunderhead on Sat Dec 04, 2021 13:34; edited 1 time in total
Router/Version: Linksys WRT54G ver2 (Yes! it's that old!)
Firmware: DD-WRT v3.0-r47665 std (11/24/21) file Previous: DD-WRT v24-sp2 ??????
Mode/Status: Router / working
Reset: no
Issues/Errors: Working well so far.
Router/Version: Linksys WRT54GS v1.1 File/Kernel: DD-WRT v3.0-r47665 mini (11/24/21) dd-wrt.v24_mini_wrt54gs.bin
Linux 2.4.37 #67174 Wed Nov 24 05:38:05 +07 2021 mips
Previous/Reset: DD-WRT v24-sp2 (10/10/09) micro - build 13064 (Yes, that old!) / No Reset
Mode/Status: Seem to be working normally
Issues/Errors: user.err syslog: Error in FILE /etc/config/base.nvramconfig on line 251, this may lead to strange effects like non working save actions
