[Alozaros]

Router Model Netgear R9000 Nighthawk X10
Firmware Version DD-WRT v3.0-r47665 std (11/24/21)
Kernel Version Linux 4.9.290 #596 SMP Mon Nov 15 05:01:03 +07 2021 armv7l

Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r47665 std (11/24/21)
Kernel Version Linux 4.9.290 #539 SMP Wed Nov 24 05:34:35 +07 2021 armv7l

Router ModelTP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r47665 std (11/24/21)
Kernel Version Linux 3.18.140-d6 #129728 Wed Nov 24 09:28:57 +07 2021 mips

update: CLI r47656 > r47665
reset: NO
mode: Gateway
status: Operational 12h+
errors: Nothing new, yet...

1043v2 recovered after bad flash currently on 47665 fully operational... Big Thanks to BS !

[Molle]

Router/Version: Netgear R7800
Previous/Reset: r47644 / r47618 (CLI update) / No
Status: OK (eventually)

DD-WRT firmware on 5 GHz (WDS AP, AC/N-Mixed, VHT80), Vanilla on 2.4 GHz (AP, NG-Mixed, Wide HT40).
IPv4, DHCP Server, DNSMasq, Static Leases, NTP Client, Ondemand Governor.

Issues: Like with r47644 wlan1 (2.4 GHz) didn't come up automatically after the initial reboot. I had to restart it through the GUI by applying settings after which it started working normally.

I thought it might have been something in my config, so I reverted back to r47618. With that version there were no issues and the wireless initialized normally.

Edit: After writing the description above, I flashed r47665 directly from r47618 and this time wlan1 started normally.

So, something must have happened with r47618=>r47644 which then carried over to r47644=>r47665. Something that a direct flash from r47618 to r47665 didn't trigger.


Router/Version: Linksys EA8500
Previous/Reset: r47644 (CLI update) / No
Status: OK

DD-WRT firmware on 5 GHz (WDS Station, AC/N-Mixed, VHT80), 2.4 GHz disabled.
IPv4, NTP Client, Ondemand Governor.

Thanks BS!

[Zyxx]

Router/Version: Netgear R7800
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r47665 std (11/24/21) (prev. DD-WRT v3.0-r47618 std (11/05/21))
Kernel: Linux 4.9.290 #539 SMP Wed Nov 24 05:34:35 +07 2021 armv7l
Mode: Gateway, SFE disabled, 2.4G and 5G wifi, Wireguard for external access, WAN to 4G, Keep Alive reboot 6:02 in the morning
Reset: No
Status: Ok, installed it yesterday.

[besteiro]

TP-Link TL-WR841ND v10
File/Kernel: r47665 std (11/24/21)
Previous/Reset: r47644 / web install / no reset
Mode/Status: AP / Client Bridge
Issues/Errors: none yet (but normally don't have problems until the signal just disappear)

[turbowells]

Router/Version: TP-Link ARCHER-C7 v4
File: tplink_archer-c7-v4.bin
Firmware: DD-WRT v3.0-r47665 std (11/24/21)
Kernel: Linux 3.18.140-d6 #129736 Wed Nov 24 09:43:56 +07 2021 mips
Mode: Gateway/USB/MAC based QOS FQ_CODEL_FAST
Previous: r43516
Reset?: N
Status: Working

Router/Version: TP-Link ARCHER-C7 v4
File: tplink_archer-c7-v4.bin
Firmware: DD-WRT v3.0-r47665 std (11/24/21)
Kernel: Linux 3.18.140-d6 #129736 Wed Nov 24 09:43:56 +07 2021 mips
Mode: AP
Previous: r43516
Reset?: N
Status: Working