[SOLVED] Netgear R9000 turns LEDs on and off

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
royitoroy
DD-WRT User


Joined: 07 Jun 2007
Posts: 244
Location: La Paz, Bolivia

PostPosted: Sat Nov 20, 2021 21:18    Post subject: [SOLVED] Netgear R9000 turns LEDs on and off Reply with quote
Hi friends!

For a long time my network has been without problems but now suddenly and without any change or previous problem my main netgear R9000 router has stopped working turning off and on the LEDs and without giving access to it. it looks like brick it

video



I have turned it off for 10sec and nothing, then unplug everything and turn it off for 2 hours and nothing ...
What do you think it could be?

help Sad Confused

edited: by the way if you ask whats is my router ► MAINROUTER:
NETGEAR NIGTHAWK R9000 --> DD-WRT v3.0-r47510 std
WAN, Gateway, DHCP, Vanilla, 2.4Ghz, 5Ghz, WPA2, Sharing USB Printer, QoS, 1gbps Wired NAS Server, Entware: Zerotier, Mc

_________________

Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2
(failover)

MAINROUTER:
Raspberry PI 4 ►► OpenWrt 19.07.8

Load Balancer, Failover, Vlans, QoS, DHCP.

AP 1:
NETGEAR NIGTHAWK R9000 ►► DD-WRT v3.0-r47510 std

Vanilla, 2.4Ghz, 5Ghz, WPA2, Sharing USB Printer, Wired OpenMediaVault Data Server.
AP 2:
TP-LINK ARCHER AC1750 C7 v2 ►► DD-WRT v3.0-r47225 std
AP 3 & 4
TP-LINK ARCHER AC1750 A7 v5.6 ►► DD-WRT v3.0-r47282 std


Tutorials & WikisDownload FirmwaresBest Wifi SettingsComplete Guide Wifi


Last edited by royitoroy on Tue Nov 23, 2021 19:42; edited 1 time in total
Sponsor
royitoroy
DD-WRT User


Joined: 07 Jun 2007
Posts: 244
Location: La Paz, Bolivia

PostPosted: Sat Nov 20, 2021 23:27    Post subject: Reply with quote
I will try to do a first reset or hard reset 30-30-30 and I'll let you know what happened
_________________

Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2
(failover)

MAINROUTER:
Raspberry PI 4 ►► OpenWrt 19.07.8

Load Balancer, Failover, Vlans, QoS, DHCP.

AP 1:
NETGEAR NIGTHAWK R9000 ►► DD-WRT v3.0-r47510 std

Vanilla, 2.4Ghz, 5Ghz, WPA2, Sharing USB Printer, Wired OpenMediaVault Data Server.
AP 2:
TP-LINK ARCHER AC1750 C7 v2 ►► DD-WRT v3.0-r47225 std
AP 3 & 4
TP-LINK ARCHER AC1750 A7 v5.6 ►► DD-WRT v3.0-r47282 std


Tutorials & WikisDownload FirmwaresBest Wifi SettingsComplete Guide Wifi
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Sun Nov 21, 2021 1:45    Post subject: Reply with quote
You don't 30-30-30 this device; you will put it in TFTP recovery mode or brick it. If you can't log in via telnet or ssh and do an 'nvram erase && reboot', all you *should* need to do is press the reset for ~10 sec with it booted up, if it even boots up.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6408
Location: UK, London, just across the river..

PostPosted: Sun Nov 21, 2021 8:15    Post subject: Reply with quote
smells like Power Supply Issue... check your PSU..
if not, try TFTP than, unless its not hardware failure...last resort serial recovery...

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
royitoroy
DD-WRT User


Joined: 07 Jun 2007
Posts: 244
Location: La Paz, Bolivia

PostPosted: Mon Nov 22, 2021 1:43    Post subject: Reply with quote
I was on a trip but I will arrive tomorrow and I will put into practice everything they have told me in addition to other things that I read and I will give news Cool
_________________

Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2
(failover)

MAINROUTER:
Raspberry PI 4 ►► OpenWrt 19.07.8

Load Balancer, Failover, Vlans, QoS, DHCP.

AP 1:
NETGEAR NIGTHAWK R9000 ►► DD-WRT v3.0-r47510 std

Vanilla, 2.4Ghz, 5Ghz, WPA2, Sharing USB Printer, Wired OpenMediaVault Data Server.
AP 2:
TP-LINK ARCHER AC1750 C7 v2 ►► DD-WRT v3.0-r47225 std
AP 3 & 4
TP-LINK ARCHER AC1750 A7 v5.6 ►► DD-WRT v3.0-r47282 std


Tutorials & WikisDownload FirmwaresBest Wifi SettingsComplete Guide Wifi
royitoroy
DD-WRT User


Joined: 07 Jun 2007
Posts: 244
Location: La Paz, Bolivia

PostPosted: Mon Nov 22, 2021 16:56    Post subject: Reply with quote
kernel-panic69 wrote:
You don't 30-30-30 this device; you will put it in TFTP recovery mode or brick it. If you can't log in via telnet or ssh and do an 'nvram erase && reboot', all you *should* need to do is press the reset for ~10 sec with it booted up, if it even boots up.


this 10sec dont worked at all still the same Crying or Very sad

_________________

Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2
(failover)

MAINROUTER:
Raspberry PI 4 ►► OpenWrt 19.07.8

Load Balancer, Failover, Vlans, QoS, DHCP.

AP 1:
NETGEAR NIGTHAWK R9000 ►► DD-WRT v3.0-r47510 std

Vanilla, 2.4Ghz, 5Ghz, WPA2, Sharing USB Printer, Wired OpenMediaVault Data Server.
AP 2:
TP-LINK ARCHER AC1750 C7 v2 ►► DD-WRT v3.0-r47225 std
AP 3 & 4
TP-LINK ARCHER AC1750 A7 v5.6 ►► DD-WRT v3.0-r47282 std


Tutorials & WikisDownload FirmwaresBest Wifi SettingsComplete Guide Wifi
royitoroy
DD-WRT User


Joined: 07 Jun 2007
Posts: 244
Location: La Paz, Bolivia

PostPosted: Mon Nov 22, 2021 16:57    Post subject: Reply with quote
I connect to the wired router and it does not recognize on the pc that it is connected
_________________

Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2
(failover)

MAINROUTER:
Raspberry PI 4 ►► OpenWrt 19.07.8

Load Balancer, Failover, Vlans, QoS, DHCP.

AP 1:
NETGEAR NIGTHAWK R9000 ►► DD-WRT v3.0-r47510 std

Vanilla, 2.4Ghz, 5Ghz, WPA2, Sharing USB Printer, Wired OpenMediaVault Data Server.
AP 2:
TP-LINK ARCHER AC1750 C7 v2 ►► DD-WRT v3.0-r47225 std
AP 3 & 4
TP-LINK ARCHER AC1750 A7 v5.6 ►► DD-WRT v3.0-r47282 std


Tutorials & WikisDownload FirmwaresBest Wifi SettingsComplete Guide Wifi
royitoroy
DD-WRT User


Joined: 07 Jun 2007
Posts: 244
Location: La Paz, Bolivia

PostPosted: Mon Nov 22, 2021 16:59    Post subject: Reply with quote
Alozaros wrote:
smells like Power Supply Issue... check your PSU..
if not, try TFTP than, unless its not hardware failure...last resort serial recovery...


how can i try the TFTP and the other serial thing?

_________________

Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2
(failover)

MAINROUTER:
Raspberry PI 4 ►► OpenWrt 19.07.8

Load Balancer, Failover, Vlans, QoS, DHCP.

AP 1:
NETGEAR NIGTHAWK R9000 ►► DD-WRT v3.0-r47510 std

Vanilla, 2.4Ghz, 5Ghz, WPA2, Sharing USB Printer, Wired OpenMediaVault Data Server.
AP 2:
TP-LINK ARCHER AC1750 C7 v2 ►► DD-WRT v3.0-r47225 std
AP 3 & 4
TP-LINK ARCHER AC1750 A7 v5.6 ►► DD-WRT v3.0-r47282 std


Tutorials & WikisDownload FirmwaresBest Wifi SettingsComplete Guide Wifi
royitoroy
DD-WRT User


Joined: 07 Jun 2007
Posts: 244
Location: La Paz, Bolivia

PostPosted: Mon Nov 22, 2021 17:04    Post subject: Reply with quote






the power adapter seems fine, well... i never unplug it or tamper with anything ... open the router

_________________

Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2
(failover)

MAINROUTER:
Raspberry PI 4 ►► OpenWrt 19.07.8

Load Balancer, Failover, Vlans, QoS, DHCP.

AP 1:
NETGEAR NIGTHAWK R9000 ►► DD-WRT v3.0-r47510 std

Vanilla, 2.4Ghz, 5Ghz, WPA2, Sharing USB Printer, Wired OpenMediaVault Data Server.
AP 2:
TP-LINK ARCHER AC1750 C7 v2 ►► DD-WRT v3.0-r47225 std
AP 3 & 4
TP-LINK ARCHER AC1750 A7 v5.6 ►► DD-WRT v3.0-r47282 std


Tutorials & WikisDownload FirmwaresBest Wifi SettingsComplete Guide Wifi


Last edited by royitoroy on Mon Nov 22, 2021 17:53; edited 1 time in total
royitoroy
DD-WRT User


Joined: 07 Jun 2007
Posts: 244
Location: La Paz, Bolivia

PostPosted: Mon Nov 22, 2021 17:15    Post subject: Reply with quote
Alozaros wrote:
smells like Power Supply Issue... check your PSU..
if not, try TFTP than, unless its not hardware failure...last resort serial recovery...


probably tis could help
https://kb.netgear.com/000059633/How-to-upload-firmware-to-a-NETGEAR-router-using-TFTP-client

but i dont know what firmware file do i have to got

_________________

Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2
(failover)

MAINROUTER:
Raspberry PI 4 ►► OpenWrt 19.07.8

Load Balancer, Failover, Vlans, QoS, DHCP.

AP 1:
NETGEAR NIGTHAWK R9000 ►► DD-WRT v3.0-r47510 std

Vanilla, 2.4Ghz, 5Ghz, WPA2, Sharing USB Printer, Wired OpenMediaVault Data Server.
AP 2:
TP-LINK ARCHER AC1750 C7 v2 ►► DD-WRT v3.0-r47225 std
AP 3 & 4
TP-LINK ARCHER AC1750 A7 v5.6 ►► DD-WRT v3.0-r47282 std


Tutorials & WikisDownload FirmwaresBest Wifi SettingsComplete Guide Wifi
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2927
Location: Germany

PostPosted: Mon Nov 22, 2021 17:41    Post subject: Reply with quote
to do this, you must first be able to set the router to TFTP mode

normally this is very easy:

you turn off the router and press the reset button and keep it pressed.
then turn on the router and watch the power LED
After the power LED is red, it will start blinking white.
then you can release the reset button

but this is certainly all described in your link.
royitoroy
DD-WRT User


Joined: 07 Jun 2007
Posts: 244
Location: La Paz, Bolivia

PostPosted: Mon Nov 22, 2021 17:58    Post subject: Reply with quote
ho1Aetoo wrote:
to do this, you must first be able to set the router to TFTP mode

normally this is very easy:

you turn off the router and press the reset button and keep it pressed.
then turn on the router and watch the power LED
After the power LED is red, it will start blinking white.
then you can release the reset button

but this is certainly all described in your link.


It does not say anything about the reset button, but I will try the 2 ways, but I do not know which firmware file I should use

I took advantage of disassembling it and I have seen some marks on the back, in the photo you can see it, so I will clean it a little

_________________

Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2
(failover)

MAINROUTER:
Raspberry PI 4 ►► OpenWrt 19.07.8

Load Balancer, Failover, Vlans, QoS, DHCP.

AP 1:
NETGEAR NIGTHAWK R9000 ►► DD-WRT v3.0-r47510 std

Vanilla, 2.4Ghz, 5Ghz, WPA2, Sharing USB Printer, Wired OpenMediaVault Data Server.
AP 2:
TP-LINK ARCHER AC1750 C7 v2 ►► DD-WRT v3.0-r47225 std
AP 3 & 4
TP-LINK ARCHER AC1750 A7 v5.6 ►► DD-WRT v3.0-r47282 std


Tutorials & WikisDownload FirmwaresBest Wifi SettingsComplete Guide Wifi
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2927
Location: Germany

PostPosted: Mon Nov 22, 2021 18:04    Post subject: Reply with quote
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2021/11-18-2021-r47656/netgear-r9000/factory-to-ddwrt.img

The factory-to-ddwrt.img or the Netgear stock firmware
royitoroy
DD-WRT User


Joined: 07 Jun 2007
Posts: 244
Location: La Paz, Bolivia

PostPosted: Mon Nov 22, 2021 21:22    Post subject: Reply with quote
I tried to do the TFTP but they say that the power led should turn red or orange, but it does not because since my router turns on the leds turn on and off as in the image





On the page it says that it must be turned off and connected by cable and when turning on the router wait until the power led changes from orange to white and press put on the TFTP and the friend ho1Aetoo says that I must press reset ...

I did the 2 ways but however the LEDs never stop turning off and on and the TFTP fails to advance and freezes it does nothing ... the pc does not recognize that no router is connected to the lan

_________________

Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2
(failover)

MAINROUTER:
Raspberry PI 4 ►► OpenWrt 19.07.8

Load Balancer, Failover, Vlans, QoS, DHCP.

AP 1:
NETGEAR NIGTHAWK R9000 ►► DD-WRT v3.0-r47510 std

Vanilla, 2.4Ghz, 5Ghz, WPA2, Sharing USB Printer, Wired OpenMediaVault Data Server.
AP 2:
TP-LINK ARCHER AC1750 C7 v2 ►► DD-WRT v3.0-r47225 std
AP 3 & 4
TP-LINK ARCHER AC1750 A7 v5.6 ►► DD-WRT v3.0-r47282 std


Tutorials & WikisDownload FirmwaresBest Wifi SettingsComplete Guide Wifi
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Mon Nov 22, 2021 22:24    Post subject: Reply with quote
https://community.netgear.com/t5/Nighthawk-WiFi-Routers/Nighthawk-x10-R9000-blinking-lights/td-p/1170631
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum