Posted: Thu Nov 18, 2021 8:19 Post subject: New Build - 11/18/2021 - r47656
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• DNScrypt 1.95 can still be used in WebUIbut v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
• VAPs not working at bootwas fixed for unbridged VAPs (40562-40566). Effective startup commands: see discussion thread.
• If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search Trac tickets & discuss in forum before opening. Before reporting reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Firmware Version: DD-WRT v3.0-r47656 std (11/18/21)
Kernel Version: Linux 4.4.292 #4450 SMP Thu Nov 18 02:58:32 +07 2021 armv7l
Upgraded from: DD-WRT v3.0-r47608 std
Reset: No
Status: All pre-upgrade services are running. Using VLAN/WireGuard/DHCP Server. But 5GHz does not work.
Errors: 'nvram set brcm_unlock=1;nvram commit;reboot' does not resolve 5GHz issue. I could recovery following precedure:
1. Power-off, then Power-on while pressing Reset Button, then enter rescue mode.
2. Use Asus Firmware recovery tool, transfer "experimental_driver" firmware. automatic reboot.
3. From DD-WRT Web-GUI, transfer previous(r47608) firmware.
4. Previous normal state(5GHz ready) recovery done.
Direct r47665->r47608 downgrade does not resolve this issue.
Edit: DDNS not working as expected, not clear if it's because of external DDNS website (https://www.dynu.com/) or because of DDWRT or because of RB
1st reboot after FW upgrade: lighttpd is up & accessible via LAN IP address, but inaccessible via dynamic domain name
IP check (http://checkip.amazonaws.com/) showing that my WAN IP address is different than the IP address registered at DDNS service website (https://www.dynu.com/)
Reboot router: DDNS is still not updated
Click Save button on DDWRT's DDNS page (/DDNS.asp):DDNS Status shows the following
Code:
Fri Nov 19 03:44:19 2021: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.
Fri Nov 19 03:44:19 2021: INADYN: IP read from cache file is '119.74.xxx.xxx'. No update required.
Fri Nov 19 03:45:25 2021: I:INADYN: IP address for alias 'xxx.mywire.org' needs update to '121.7.xxx.xxx'
Fri Nov 19 03:45:28 2021: I:INADYN: Alias 'xxx.mywire.org' to IP '121.7.xxx.xxx' updated successfully.
After that, the IP address registered at DDNS service website (https://www.dynu.com/) is still not updated. The "Last updated" time at at DDNS service website (https://www.dynu.com/) is also not updated (2021/09/22 17:41:11)
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Thu Nov 18, 2021 16:01 Post subject:
Router Model: Netgear R6400v1
Firmware Version: DD-WRT v3.0-r47656M Community Build (11/18/21)
Kernel Version: Linux 4.4.292 #1 SMP Thu Nov 18 10:38:08 CET 2021 armv7l
Upgraded from: DD-WRT v3.0-r474618
Reset: No not this time
Status: Up and running for 2 hours, basic setup as Gateway, static leases, IPv4, 2.4 GHz and 5 GHz working.
Running one WireGuard tunnel to Keepsolid and second WireGuard tunnel to own WG server for site-to-site connection.
OpenVPN client tested and working.
Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Thu Nov 18, 2021 17:04 Post subject:
Mr R Design wrote:
There is still a problem on this build which has been mentioned by other people on other recent builds to do with USB storage.
You cannot delete, create, or copy to without getting errors (you cannot even create a 'new folder').
The problem is totally repeatable and is happening to me on an R7000 via Windows 10. Reverting back to r47381 solves the problem everytime.
My R7000 goes a step further...If I try to use Filezilla to transfer a directory...it transfers about 20-25M of data...freezes...then restarts the router. Its the only thing I have problems with on the newer firmware. It's a good thing I don't use it for reliable storage. If I exit Filezilla, then re-enter, it can't find the file directory it just wrote and shows as empty even though the USB page shows there is data on the mem-stick.
I'm not very proficient with USB and ftp so I'm not sure how to troubleshoot it. I originally thought it was a Filezilla setup issue..now with all these forum posts about it...I'm beginning to think it has something to do with the ProFTP on the router.
redhawk _________________ The only stupid question....is the unasked one.
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r47656 std (11/18/21)
Kernel: Linux 4.4.292 #4445 SMP Wed Nov 17 13:06:24 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound, CTF & FA Enabled. NAT/QoS Off
Reset: No
Previous : r47644
Upgrade: Web only https://192.168.1.1
Temperatures CPU 80.2 °C / WL0 manuel turn off /WL1 56.7 °C
Load: 0.00, 0.02, 0.00
Uptime 5:15.
Thank BS and all team stuff. It works.
Agreed! Must Disable "Query DNS in Strict Order" if dnsmasq working with unbound.
Firmware: v3.0-r47656 std (11/18/21)
Router/Version: Netgear R7000 Kernel: Linux 4.4.292 #4445 SMP Wed Nov 17 13:06:24 +07 2021 armv7l
Previous: v3.0-r47644 std (11/15/21)
Mode/Status: AP wired and wireless / Up and running for 2 days
Reset: Soft boot before and after upgrade
Temperatures: CPU 58.0 °C / WL0 45.3 °C / WL1 50.3 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec (500/500 Mbps). Nothing unexpected in the syslog.
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7