Posted: Mon Nov 15, 2021 9:32 Post subject: New Build - 11/15/2021 - r47644
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search Trac tickets & discuss in forum before opening. Before reporting reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Netgear WNDR3700 V4
DD-WRT v3.0-r47644 std (11/15/21)
Linux 3.18.140-d6 #129516 Mon Nov 15 10:26:43 +07 2021 mips
GUI install over r47618
switch / ovpn server
all ok + both radios good
#
Linksys EA8500
DD-WRT v3.0-r47644 std (11/15/21)
Linux 4.9.290 #533 SMP Mon Nov 15 05:27:21 +07 2021 armv7l
GUI install over r47531
switch / ovpn server / samba share
all ok --- but SAMBA still NO worky good.
booted her back into r47531
Update method: GUI
Router/Version: TP-Link TL-WDR4900 v1
File/Kernel: Linux 4.4.292 #2435 Mon Nov 15 05:15:46 +07 2021 ppc
Previous/Reset: r47618 / Yes
Mode/Status: Default settings after nvram erase / Seems normal
Issues/Errors: None sofar
Did a quick test to see if the reset button works. Long pressing the reset button that clears the nvram and does a reboot afterwards, works. Thanks BS!
Will do some more testing later this week. _________________
1x TP-Link Archer C7 V2.0 r48432 (Primary router at primary location. Former Ziggo repeater)
1x TP-Link Archer C7 V2.0 OpenWrt 21.02.3 (Testing at primary location. Former Ziggo repeater)
1x TP-Link Archer C7 V5.0 r48540 (Secondary router at primary location)
1x TP-Link Archer C7 V5.0 OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WR1043ND V4.0 OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WDR4900 V1.3 (green leds) r48646 (Primary router at secondary location)
1x TP-Link WDR4900 V1.3 (blue leds) OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WDR4900 V1.3 (green leds) OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WDR4900 V1.3 (green leds) OpenWrt 21.02.3 (Testing at primary location)
1x TP-Link WDR4900 V1.3 (blue leds) r47925 (Testing at secondary location)
1x Linksys WRT160NL r48494 (Guest network with QoS at secondary location)
1x Linksys WRT54G V2.0 r14929 (Switched off at secondary location)
1x Linksys WRT54GL V1.1 r14929
Router/Version: Netgear R7800
File/Kernel: Linux 4.9.280
Previous/Reset: CLI update / No reset
Mode/Status: Gateway / Working
Issues/Errors: Works fine but something is messed up with WireGuard
Using Vanilla on 2.4 and DD-WRT on 5GHz, WAN, QoS, Wireguard tunnel, DDNS, DNSmasq.
I still have troubles with WireGuard, I don't know what's the trouble but I have to manually export the current config and re-add to my iPhone/Macbook/iPad. After that it works like a charm.
I'm also using no-ip to retrieve automatically the IP when the router reboot but this has alway worked, I think something has changed with the latest update of WireGuard: Changeset 46974
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Tue Nov 16, 2021 10:02 Post subject:
Router Model: Linksys EA8500
Firmware Version:
Upgraded from: DD-WRT v3.0-r47618 std (11/05/21)
Reset: No not this time
Status: Up and running for 4 hours, basic setup as Gateway, static leases, 2.4 GHz and 5 GHz working (vanilla firmware), OpenVPN server working, WireGuard Server working (multiple clients e.g. phone, laptop and site-to-site connection with remote location).
Status: Up and running for 8 hours , basic setup as Gateway, static leases, 2,4GHz, 5Ghz (Vanilla Firmware), OpenVPN client to Keepsolid with PBR working.
WireGuard client to Keepsolid working, WireGuard client for site-to-site setup to own server working.
WireGuard server(backup for one phone), working.
i was reading about this in the wiki and in some posts but i really don't understand if this could be related.. the strange thing is the "SFE successfully stopped" when i wasn't even accessing the router
another strange thing is that before this the router have done many, many sequential auths with the main router.. like:
Code:
Nov 16 14:15:19 xxxxxx daemon.info hostapd: wlan0.1: STA xx:xx:xx:xx:xx:xx MLME: auth request, signal -68 (Accepted)
Nov 16 14:15:19 xxxxxx daemon.info hostapd: wlan0.1: STA xx:xx:xx:xx:xx:xx IEEE 802.11: authenticated
Nov 16 14:15:19 xxxxxx daemon.info hostapd: wlan0.1: STA xx:xx:xx:xx:xx:xx MLME: assoc request, signal -66 (Accepted)
Nov 16 14:15:19 xxxxxx daemon.info hostapd: wlan0.1: STA xx:xx:xx:xx:xx:xx IEEE 802.11: associated (aid 1)
Nov 16 14:15:19 xxxxxx daemon.info hostapd: wlan0.1: STA xx:xx:xx:xx:xx:xx RADIUS: starting accounting session 18FDCA14C50BCBA2
Nov 16 14:15:19 xxxxxx daemon.info hostapd: wlan0.1: STA xx:xx:xx:xx:xx:xx WPA: pairwise key handshake completed (RSN)
Could this be related with the recurring problems i've been reporting in previous versions?
Thanks!
Edit: happened again and i noticed that it is happening every hour..
Posted: Tue Nov 16, 2021 16:55 Post subject: LAN private IP traffic leaks onto WAN
Linksys EA8500
Command line install; GUI install didn't work twice.
Configuration: WDS AP, vanilla firmware, pihole->dnsmasq->stubby->DNS
Errors:
* Lan IP traffic leaks to WAN interface, not new