New Build - 07/30/2022 - r49599

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Sat Jul 30, 2022 4:52    Post subject: New Build - 07/30/2022 - r49599 Reply with quote
Welcome to Marvell r49599 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r49567 (mirror)

OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
• WRT1200AC, WRT1200AC V2, WRT1900AC, WRT1900AC V2, WRT1900ACS, WRT1900ACS V2, WRT3200ACM and WRT32X.
mDNS/Avahi fr htop SNMP NTFS-3G irqbalance Tor DoT Redirect SmartDNS PHP Asterisk OpenSSL ZFS Unbound mac80211
In-kernel Samba (ksmbd 3.4.4++++): guest behavior selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version:[/b]
[b]File/Kernel:[/b]
[b]Previous/Reset:[/b]
[b]Mode/Status:[/b]
[b]Issues/Errors:[/b]
Sponsor
Fritzbuf
DD-WRT User


Joined: 22 Feb 2014
Posts: 156
Location: Germany

PostPosted: Sat Jul 30, 2022 7:52    Post subject: Reply with quote
Router: Linksys WRT3200ACM
Previous/Reset: r49544/no
Issues/Errors: no/no

- update works good without any problems
- VPN WireGuard
- USB
- DDNS
- CRON "delete directories older > x Days, created by 3xWebCams (stored on128GB SSD)":
e.g. for Cam1: 10 0 * * * root find /tmp/mnt/sda1/Cam1/ -type d -name "20*" -mtime +30 -print0 | xargs -0 rm -r

- Port Forwarding
- FTP
- Samba
- WLAN offline, I use UniFi AP AC LITE as access Point!
- Lan


all OK without error, Thank You for the good work !!!!
papagdog
DD-WRT Novice


Joined: 09 Sep 2021
Posts: 23

PostPosted: Sun Jul 31, 2022 4:02    Post subject: Reply with quote
Router/Version: WRT3200ACM/Firmware: DD-WRT v3.0-r49599 std (07/30/22)
Time: 16:14:20 up 2 min, load average: 0.27, 0.21, 0.08
File/Kernel: GUI Upgrade/Linux version 4.9.325 (root@server2) (gcc version 11.1.0 (OpenWrt GCC 11.1.0 r16904-a4e2766a5b) ) #3326 SMP Sat Jul 30 03:04:10 +07 2022
Previous/Reset: r49567/No
Mode/Status: Gateway/Router/AP/wlan0, 0.1 & 0.2 & 0.3/ wlan1, 1.1, & 1.2/ Samba via eSATA 4TB/ VLAN Split 2‐br0 & 2‐br1/ Print USB2/ VPN Client Config / Wireguard Config w/Proton
Issues/Errors: none so far
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504

PostPosted: Sun Jul 31, 2022 4:20    Post subject: Reply with quote
Router Model Linksys WRT1900ACS v2
Firmware Version DD-WRT v3.0-r49599 std (07/30/22)
Kernel Version Linux 4.9.325 #3326 SMP Sat Jul 30 03:04:10 +07 2022 armv7l
Current Time Sun, 31 Jul 2022 07:15:34
Uptime 16:46

update- browser-waterfox,I switched directly from the first partition from the original software Linksys,No Reset
connection Type PPPoE - IPv6 Type DHCPv6 with Prefix Delegation- DHCPv6 Server Daemon Enable Daemon, Router Advertisement Daemon (radvd)Enable Daemon,
Schedule Reboot-on,
Web Access Protocol - HTTPS,
Port Forwarding ok,

adblock - 1.Go to Administration -> Go to Administration -> Commands. paste it in “Run Startup”

wget -qO /tmp/mvps http://winhelp2002.mvps.org/hosts.txt
curl -k https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts https://raw.githubusercontent.com/jerryn70/GoodbyeAds/master/Hosts/GoodbyeAds.txt "^0.0.0.0" >> /tmp/mvps
killall -HUP dnsmasq
stopservice dnsmasq && startservice dnsmasq

2.then in the Additional Dnsmasq options add this: addn-hosts=/tmp/mvps 3.Schedule Reboot tuesday 4.reboot router

Wireless Interface 5GHz-Wireless Mode AP-Wireless Network Mode-AC, Width VHT 80 Mhz-Wireless Channel-36,Short GI, Short Preamble,Single User Beamforming, Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES, Regulatory Domain Romania , all-ok

Wireless Interface 2.4GHz-Wireless Mode AP-Wireless Network Mode-N/G, Width VHT 40 Mhz-Wireless Channel-6, Extension Channel Lower,Short Preamble, Short GI , Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES)all-ok

Issues/Errors: today, after 16 hours of use, I tried to make some changes in the wifi tab and after that I saved and applied the settings, I noticed that ipv6 no longer allocates and disappeared!
If I disable and re-enable ipv6 from the Enable IPv6 tab, everything works fine again, this happens if we do not have No Release on Reconnect active!

_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results
Zyxx
DD-WRT Guru


Joined: 28 Dec 2018
Posts: 733

PostPosted: Wed Aug 03, 2022 9:15    Post subject: Reply with quote
Router/Version: Linksys WRT1900ACS v2
File: ddwrt-linksys-wrt1900acsv2-webflash.bin
Firmware: DD-WRT v3.0-r49599 std (07/30/22) (prev. DD-WRT v3.0-r49567 std (07/27/22))
Kernel: Linux 4.9.325 #3326 SMP Sat Jul 30 03:04:10 +07 2022 armv7l
Mode: Gateway, SFE enabled, Wifi disabled, Wireguard for external access, WAN to DSL, samba to access USB3-ext4 SSD, Keep Alive reboot 5:00 in the morning
Reset: No
Status: Installed at release, ok. Load average 0.00, 0.00, 0.00, Temperatures CPU 80.3 °C / WL0 53.3 °C / WL1 55.0 °C
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum