Author
Message
nanvanu1 DD-WRT User Joined: 30 Mar 2020 Posts: 61
Posted: Sun Oct 24, 2021 3:58 Post subject: ack timing recommendations for client bridge
does i should set in 1350 or 1800.in 1350,erros rate are 0.01%,and in 1800 are 0.03%
Back to top
Sponsor
Per Yngve Berg DD-WRT Guru Joined: 13 Aug 2013 Posts: 6858 Location: Romerike, Norway
Posted: Sun Oct 24, 2021 9:01 Post subject:
Depends of the distance between the AP and the client. Set it to 110% of the time a signal takes to move between them.
Better with to much than to little.
Back to top
nanvanu1 DD-WRT User Joined: 30 Mar 2020 Posts: 61
Posted: Sun Oct 24, 2021 10:17 Post subject:
Per Yngve Berg wrote: Depends of the distance between the AP and the client. Set it to 110% of the time a signal takes to move between them.
Better with to much than to little.
i set in 900 and ntp is unavailable.i set in 1350 ntp is available .i set in 1800 banwidth is better and faster.distance between ap and bridge is about 35-40m
Back to top
Per Yngve Berg DD-WRT Guru Joined: 13 Aug 2013 Posts: 6858 Location: Romerike, Norway
Posted: Sat Oct 30, 2021 9:21 Post subject:
I have 2250 on 2.4 Ghz and 1350 on 5 Ghz.
You have to consider all stations, including any neighbours AP that are on the same channel.
2250 meters are 15 micro seconds in time.
Back to top
nanvanu1 DD-WRT User Joined: 30 Mar 2020 Posts: 61
Posted: Sun Oct 31, 2021 13:59 Post subject:
Per Yngve Berg wrote: I have 2250 on 2.4 Ghz and 1350 on 5 Ghz.
You have to consider all stations, including any neighbours AP that are on the same channel.
2250 meters are 15 micro seconds in time.
i think 1800.it is perfect ack timing in 2.4 for 30 metter
Back to top