Posted: Fri Sep 24, 2021 3:10 Post subject: [SOLVED] Over Clock router cpu r7000 and make permanet
Hi can any body tell me how to make this permanent have followed the following directions but as soon as you reboot reverts back to standard CPU rate
nvram get clkfreq (get current clock rate)
nvram set clkfreq=1200,800 (OC cpu/ram stock)
nvram commit && reboot (write change & reboot)
Changing ram speeds to anything other than 800 appears to default the ram to 400. CPU OC is dependent upon you hardware.
Joined: 18 Mar 2014 Posts: 12915 Location: Netherlands
Posted: Fri Sep 24, 2021 7:00 Post subject: Re: Over Clock router cpu r7000 and make permanet
whytewolf69 wrote:
Hi can any body tell me how to make this permanent have followed the following directions but as soon as you reboot reverts back to standard CPU rate
nvram get clkfreq (get current clock rate)
nvram set clkfreq=1200,800 (OC cpu/ram stock)
nvram commit && reboot (write change & reboot)
Changing ram speeds to anything other than 800 appears to default the ram to 400. CPU OC is dependent upon you hardware.
To get optimal support it is helpful to always state not only router model but also build number.
See the forum guidelines with lots of useful information about where to find builds, how to post etc: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087