Thank you.
Yes 1 hour ago with FONFLASH I uploaded linux.bin and It works.
After set the IP address now I have this message in my lan card status: unidentified network
I don't understand, With factory default I see "ddwrt" in my lan status, after set IP and DHCP server on Fonera now always unidentified network....and I am not able to enter in web gui..
Leave the IP as default, can you get into DD-WRT then?
If you change the IP make sure settings are correct, please post screenshots of the problematic settings, before you reboot.
Bare in mind when you reboot after, at least on my router the unidentified network happens twice before the router finally boots completely and all the services are back up, and then it stabilizes and DHCP server kicks in and all is well.
I want to connect this device to the main router (with internet access) in wifi and after connect others device to this fonera with wifi and cable. Is it possible?
Now I am doing this with TP-Link TL-WR841ND.
Wireless mode client, WAN IP automatic DHCP.
Main router has 192.168.1.1 and my TPLINK 192.168.2.1 and DHCP server with 192.168.2.2 --> 192.168.2.100
I want to do the same with fonera but It doesn't work.
Joined: 08 May 2018 Posts: 14129 Location: Texas, USA
Posted: Sun Jul 24, 2022 11:24 Post subject:
You have asked and posted the same questions and such on nearly every page of this thread. Everything about flashing, upgrading, and recovering this device has been shared in this thread already. If you cannot handle upgrading via redboot, use Fon Flash from the Gargoyle website, which I don't recall if I already said that in this thread, but just in case, here's the links.
You have asked and posted the same questions and such on nearly every page of this thread. Everything about flashing, upgrading, and recovering this device has been shared in this thread already. If you cannot handle upgrading via redboot, use Fon Flash from the Gargoyle website, which I don't recall if I already said that in this thread, but just in case, here's the links.
Select "FonFlash" from the drop-down menu and download the appropriate version for your PC.
Hi, maybe you don't have read my last messages?
Please read my post 1 hour ago..
Thank you.
Yes 1 hour ago with FONFLASH I uploaded linux.bin and It works.
After set the IP address now I have this message in my lan card status: unidentified network
I don't understand, With factory default I see "ddwrt" in my lan status, after set IP and DHCP server on Fonera now always unidentified network....and I am not able to enter in web gui..
Run the network troubleshooter in Windows or toggle disable/enable of the network interface in Windows. _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
Run the network troubleshooter in Windows or toggle disable/enable of the network interface in Windows.
Nothing. When I set all settings and I do "apply settings" after I am not able to reach the device.
I think it must go in garbage.
I am sad because I wanted to use this to connect a IP CAM and see CAM from internet...
Joined: 31 Jul 2021 Posts: 2146 Location: All over YOUR webs
Posted: Sun Jul 24, 2022 13:26 Post subject:
If you install old DD-WRT versions, enjoy the lack of security updates and currently exploited CVE's, just remember we dont provide support for old versions either.