d33b0_n4p41m DD-WRT User
Joined: 10 Sep 2021 Posts: 133
|
Posted: Sat Sep 18, 2021 20:58 Post subject: New Build - 09/17/2021 - r47461 |
|
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)
CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.
Repository: Trac SVN changelog since last build r47381 (GitHub mirror)
Notes:
• OpenVPN 2.5.3: Guides, Server, PBR, Reverse PBR, Client (see second post), Kill Switch, update tips, scripts and more.
• WireGuard 1.0.20210606/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips and scripts. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
• SmartDNS • MiniDLNA • Unbound • CoovaChilli • dnsmasq • Privoxy • Squid • iperf3 • cake • Tor • FreeRADIUS • OpenSSL
• In-kernel Samba ksmbd 3.4.1++: default min/max versions changed. • WSD update • ANTFS/NTFS3 kernel mode driver++
• CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 (Fragattack) fixed.
• "Assign WAN port to Switch" feature removed; likely no longer required. • MAC Filtering fixed in WebUI (see 47184-47205).
• New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro devices excluded. • Sputnik Agent is removed.
• "Ignore WAN DNS" feature patched to ignore WAN domain
Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Example Template: Code: | [b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b] |
|
|
oliver44 DD-WRT Guru
Joined: 01 Jun 2016 Posts: 504
|
Posted: Sun Sep 19, 2021 9:31 Post subject: |
|
Hello all,
Router Model Linksys WRT1900ACS v2
Firmware Version DD-WRT v3.0-r47461 std (09/17/21)
Kernel Version Linux 4.9.282 #2861 SMP Fri Sep 17 11:11:48 +07 2021 armv7l
did the update with browser-waterfox,reset from web interface after installation,i use Dracula theme,
Connection Type PPPoE-IPv6 Type DHCPv6 with Prefix Delegation-Avoid DHCP6 client release on reconnect Enable, Dhcp6s Enable, Radvd-Enable All-ok
Encrypt DNS-all ok
Port Forwarding ok
Wireless Interface 5GHz-Wireless Mode AP-Wireless Network Mode-AC, Width VHT 80 Mhz-Wireless Channel-36-Threshold 2346-Short GI, Short Preamble,Single User Beamforming, Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES, Regulatory Domain Romania , all-ok
Wireless Interface 2.4GHz-Wireless Mode AP-Wireless Network Mode-N, Width VHT 40 Mhz-Wireless Channel-6-TurboQAM (QAM256) support Enable, Threshold 2346-Short GI , Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES)all-ok
Wireless Packet Info
Received (RX)100%
679951 OK, no error
Transmitted (TX) 100%
1450664 OK, no error
Everything behaves perfectly _________________ Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt
https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results |
|