[blkt]

[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.

Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r47305 (GitHub mirror)

Notes:
• OpenVPN 2.5.3: Guides, Server, PBR, Reverse PBR, Client (see second post), Kill Switch, update tips, scripts and more.
• WireGuard 1.0.20210606/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips and scripts. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
• SmartDNS • MiniDLNA • Unbound • CoovaChilli • dnsmasq • Privoxy • Squid • iperf3 • cake • Tor • FreeRADIUS • OpenSSL
• In-kernel Samba ksmbd 3.4.1++: default min/max versions changed. • WSD update • ANTFS/NTFS3 kernel mode driver++
• CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 (Fragattack) fixed.
• "Assign WAN port to Switch" feature removed; likely no longer required. • MAC Filtering fixed in WebUI (see 47184-47205).
• New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro devices excluded. • Sputnik Agent is removed.

Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:

[pbphoto]

Router Model & Version: Linksys 3200ACM and Linksys 1900ACSv1
Firmware: DD-WRT v3.0-r47377 std (9/7/21)
File: ddwrt-linksys-wrt3200acm-webflash.bin, ddwrt-linksys-wrt1900acs-webflash.bin
Kernel: Linux 4.9.282 #2843 SMP Tue Sep 7 07:47:48 +07 2021 armv7l
Previous: DD-WRT v3.0-r47282 std (08/30/21)
Reset: No
Mode: AP / Gateway (3200ACM), Router / wifi-disabled (1900ACSv1)
Uptime: ~7 days
Status: Ok
Issues/Errors: Good and stabile for about a week, then traffic stopped flowing to two different Macbooks at the same time using 5g. Tried restarting wifi on the macbooks. This worked for a minute or two before traffic halted again. This happened several times before I rebooted the 3200ACM and everything is fine. No errors in syslog or dmesg.
Environment:
Linksys WRT3200ACM: gateway mode, DNSMasq for DNS and DHCP, Wireguard client (Mullvad), Firewall enabled, QoS enabled HTB-CAKE, PBR enabled, SFE disabled. NAS disabled. WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel 1, BI=100, DTIM=2 custom config: basic_rates=60 120 240 supported_rates=60 90 120 180 240 360 480 540. 5ghz: AC/N mixed, 40mhz channel width, channel 44+upper, BI=100, DTIM=2. Both radios: WPA2-CCMP-128, strict rekey enabled, 802.11r disabled, 802.11w disabled, disable eapol retries disabled.
Linksys WRT1900ACSv1: wifi disabled - using it as a semi-intelligent switch only. SFE enabled. Can't get wifi to work reliably post-r44048.
Clients: Apple MACOS x 4, IOS x 4, Apple TV, Chromecast Audio x 2, Eufy doorbells, Lutron Caseta, Axis Camera, Samsung TV, Nest thermostat, EtekCity outlets (Espressif), BlueSound/BlueOS devices...