Posted: Mon Aug 30, 2021 8:24 Post subject: New Build - 08/30/2021 - r47282
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Linksys EA8500...main gateway
DD-WRT v3.0-r47282 std (08/30/21)
Linux 4.9.281 #417 SMP Mon Aug 30 00:55:54 +07 2021 armv7l
GUI install over r47266
35 static DHCP leases
local DNS
Dnsmasq
unbound
samba share ext4
ovpn server
HFSC CAKE
all worky fine
uptime 11:05
#
Netgear WNDR3700 V4
DD-WRT v3.0-r47282 std (08/30/21)
Linux 3.18.140-d6 #124776 Mon Aug 30 06:12:23 +07 2021 mips
GUI install over r47266
switch / ovpn server
all good
Router/Version: R7800 (Router Swap r47117 in storage for backup working fine for over 3 weeks)
File/Kernel: DD-WRT v3.0-r47282 std (08/30/21)
Kernel Version: Linux 4.9.281 #419 SMP Mon Aug 30 01:26:30 +07 2021 armv7l
Previous/Reset: r47117 / YES(nvram erase & manual config), CLI Update
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-PD,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.0.45,YAMon3.4.7
Services Disabled: WiFi,QoS,ttraff,SFE,Telnet,NAS,Samba
Home Main AP Router
Router/Version: R7800 (Router Swap r47117 in storage for backup fine for over 3 weeks)
File/Kernel: DD-WRT v3.0-r47282 std (08/30/21)
Kernel Version: Linux 4.9.281 #419 SMP Mon Aug 30 01:26:30 +07 2021 armv7l
Previous/Reset: r47117 / YES(nvram erase & manual config), CLI Update
Mode/Status: GW(double-nat) & AP / Working Well
Issues/Errors: none / none
Services Used: Static WAN,IPv6 6to4,WiFi Vannilla,NTP,2xWG Clients,VAPx,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.0.45
Services Disabled: QoS,ttraff,SFE,Telnet,NAS,Samba
All running for over 4 hours
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!
UPDATE...
Yesterday The Gateway R7800 lost Internet access PLUS No Aceess to the R7800 via http or SSH, rebooted to get it back. This was on build r47282 with only 7 days uptime. So today I updated both R7800s to build r47377. _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Router/Version: Netgear R7800
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r47282 std (08/30/21)
Kernel: Linux 4.9.281 #419 SMP Mon Aug 30 01:26:30 +07 2021 armv7l
Mode: Gateway, 2.4G and 5G wifi, Wireguard for external access, WAN to 4G, Keep Alive reboot 6:02 in the morning
Reset: No
Status: Ok, up since release.
Joined: 25 Dec 2020 Posts: 90 Location: Toronto - Canada
Posted: Tue Aug 31, 2021 7:32 Post subject:
Router Model & Version: Netgear R7800 QCA IPQ806X
Firmware Version DD-WRT v3.0-r47282 std (08/30/21)
Kernel Version Linux 4.9.281 #419 SMP Mon Aug 30 01:26:30 +07 2021 armv7l
File: HTTPS D/L - dd-wrt-webupgrade.bin2021 armv7l
Previous/Reset: 47225->47206->47282/NO
Mode/Usage: Gateway. ISP via DHCP ignore WAN DNS w static DNS, DD-WRT 2.4Ghz N unbridged PRNT SRV, Vanilla 5Ghz Mix bridged, 5Ghz unbridged and isolated, all WIFI with MAC filter, NAT 3x Static DHCP SRV, access restrictions, cooler fan via USB, and UpnP.
Uptime: 1hr
Status: Operational all network/everything working/functional.
Issues/Errors:Issues with Brainslayer skin. SYSLog overlaps menu on left, making some things unreadable. Links still working on the menu. / NONE
Very good build! Up over 36 hours with active logging and is very stable with no issues at all. Thanks Brainslayer and everyone else working on dd-wrt!
Last edited by CR_Apollo on Wed Sep 01, 2021 22:57; edited 1 time in total
Router Model & Version: two Netgear R7800's
Firmware: DD-WRT v3.0-r47282 std (08/30/21)
File: dd-wrt-webupgrade.bin
Kernel: Linux router2 4.9.281 #419 SMP Mon Aug 30 01:26:30 +07 2021 armv7l
Previous: DD-WRT v3.0-r47256 std (08/25/21)
Reset: No
Mode: AP / Router
Uptime: ~2 days
Status: Ok
Issues/Errors: Nothing major. Solid release; good performance.
Environment: Two Netgear r7800s - as hardwired WAPs in router-mode with nearly identical WIFI settings to the 3200ACM above, just different wifi channels and BI=300, DTIM=1. Vanilla firmware, SFE enabled, DNSmasq disabled, NAS disabled, firewall disabled, QoS disabled,
Clients: Apple MACOS x 4, IOS x 4, Apple TV, Chromecast Audio x 2, Eufy doorbells, Lutron Caseta, Axis Camera, Samsung TV, Nest thermostat, EtekCity outlets (Espressif), BlueSound/BlueOS devices...
Last edited by pbphoto on Wed Sep 01, 2021 20:48; edited 1 time in total
Joined: 05 Oct 2008 Posts: 666 Location: Helsinki, Finland / nr. Alkmaar, Netherlands
Posted: Wed Sep 01, 2021 19:37 Post subject: Active client's MAC address not updated
R7800 running build 47282.
Current smartphones have an annoying habit of using a random MAC address if you let them. Apparently the device can revert to the undesired behaviour somehow later on, even when you have set it to not use a random MAC.
Anyway, after you make the phone use its assigned MAC again, DD-WRT updates the MAC in the DHCP clients list, and also in the Wireless Nodes list, but not in the active clients list, even though it does start showing the hostname of the device in the active clients list. This list keeps showing the old random MAC it used earlier, despite auto-refresh or manual refreshing.
Joined: 07 Jun 2007 Posts: 244 Location: La Paz, Bolivia
Posted: Wed Sep 01, 2021 19:39 Post subject:
AP 3
Router/Version: TP-Link ARCHER-A7 v5/DD-WRT v3.0-r47282 std (08/30/21)
File/Kernel: Linux 3.18.140-d6 #124760 Mon Aug 30 05:39:51 +07 2021 mips
update method: wireless CLI install
Previous/Reset: DD-WRT v3.0-r47225 std (08/23/21)
Mode/Status: AP connected via LAN, SFE, DHCP disable, WIFI 2.4/5ghz - Vanilla , MAC filter, public VAP or WAP
Reset: No
Status: at the moment everything OK, Led lights problem remains
Issues/Errors: at the moment everything OK, Led lights problem remains
Uptime: 20 min
AP 2
Router/Version: TP-Link ARCHER-A7 v5/DD-WRT v3.0-r47282 std (08/30/21)
File/Kernel: Linux 3.18.140-d6 #124760 Mon Aug 30 05:39:51 +07 2021 mips
update method: wireless CLI install
Previous/Reset: DD-WRT v3.0-r47225 std (08/23/21)
Mode/Status: AP connected via LAN, SFE, DHCP disable, WIFI 2.4/5ghz - Vanilla , MAC filter, public VAP or WAP
Reset: No
Status: at the moment everything OK, Led lights problem remains
Issues/Errors: at the moment everything OK, Led lights problem remains
Uptime: 10 min _________________ Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2 (failover)