New Build - 09/03/2021 - r47305

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Fri Sep 03, 2021 6:36    Post subject: New Build - 09/03/2021 - r47305 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r47282 (GitHub mirror)

Notes:
OpenVPN 2.5.3: Guides, Server, PBR, Reverse PBR, Client (see second post), Kill Switch, update tips, scripts and more.
WireGuard 1.0.20210606/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips and scripts. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• Broadcom MIPS devices are now on kernel 4.4. • Support added for TP-Link Archer C8 v2 and v3.
SmartDNSMiniDLNAUnboundCoovaChillidnsmasqPrivoxySquidiperf3cakeTorFreeRADIUSOpenSSL
In-kernel Samba (ksmbd 3.4.1++): default min/max versions changed. • WSD update ANTFS/NTFS3 kernel mode driver+
• Added swconfig support for Broadcom devices.
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 (Fragattack) fixed.
• "Assign WAN port to Switch" feature removed; likely no longer required.
• MAC Filtering fixed in WebUI (changesets 47184-47205).

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs in 40562 - 40566. Effective startup commands discussion thread is here.
If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
Show us your findings with steps to reproduce, configuration, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 951

PostPosted: Fri Sep 03, 2021 13:33    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.282 #3983 SMP Thu Sep 2 03:52:49 +07 2021 armv7l
Previous/Reset: DD-WRT v3.0-r47282 std (08/30/21) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + USB Storage + lighttpd (using Entware's php8) + Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
MysticGold04
DD-WRT User


Joined: 20 Apr 2018
Posts: 174
Location: Somewhere remote

PostPosted: Fri Sep 03, 2021 16:37    Post subject: Reply with quote
Router/Version: Asus RT-AC68U rev B1
Firmware: DD-WRT v3.0-r47305 std (09/03/21)
Kernel: Linux 4.4.282 #3983 SMP Thu Sep 2 03:52:49 +07 2021 armv7l
Previous: r47282
Mode/Status: AP Only + Wired clients
Issues/Errors: None - Working ok so far.
Uptime: 1 hour, 48 min
Upgrade: via WebUI, no issues
Reset: No
Load Averages: 0.04, 0.03, 0.00
Temperatures: CPU 77.5 °C / WL0 48.5 °C / WL1 51.0 °C

_________________
ASUS RT-AC3100 AP Merlin 386.12_4
ASUS RT-AC68U Media Bridge/Merlin 386.12_4 (x2)
ASUS RT-AC68U AP r54604
ASUS RT-AC68U Gateway/AP r54604
Edgerouter-4, v2.0.9-hotfix7
dpp3530
DD-WRT Guru


Joined: 12 Dec 2007
Posts: 764
Location: Pittsburgh, PA USA

PostPosted: Fri Sep 03, 2021 19:14    Post subject: Reply with quote
Router/Version: Netgear AC1450
File/Kernel: DD-WRT v3.0-r47305 std (09/03/21)
Previous/Reset: r47282 no reset
Mode/Status: wired access point, no gateway
Issues/Errors: Upgraded two Netgear AC1450s via web interface from wired PC using Microsoft Edge. On both the web interface died a few seconds before the devices rebooted. Neither device came back up on it's own (did not respond to PING, HTTP, or SSH). I had to physically power cycle both to get them back online. They have been working fine since. A minor issue when the devices are both in my house, but could be an issue if updating remotely. I'm also aware that the recommendation is not to use Chromium based browsers, but this is the first time I've seen an issue like this.

I should also note that the Asus RT-AC56U with a similar architecture and similar config upgraded without issue.

_________________
__________________________
Netgear R7800
DD-WRT v3.0 STD
Linksys WRT1900AC
DD-WRT v3.0 STD
saphirely
DD-WRT User


Joined: 13 Dec 2020
Posts: 266

PostPosted: Fri Sep 03, 2021 21:39    Post subject: Reply with quote
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r47305 std (09/03/21)
Kernel: Linux 4.4.282 #3983 SMP Thu Sep 2 03:52:49 +07 2021 armv7l
Mode: Gateway, Wireless AP, CTF & FA Enabled. NAT/QoS Off
Reset: No, not this time
Previous : r47282
Upgrade: Failure, and failure again. Disable unbound and disable internal JFFS, then flash success, all done in Firefox 91 under linux.
Temperatures CPU 76.9 °C / WL1 56.0 °C
Load: 0.00, 0.01, 0.00
Uptime 0h20m

Errors: No, not at this moment.

One more thing, if play youtube with 720+, no matter how config in unbound.conf, it is definition that R6250 cannot play smoothly, so return DNSCrypt Resolver instead of unbound.
twindragon6
DD-WRT User


Joined: 29 Jun 2008
Posts: 332

PostPosted: Sat Sep 04, 2021 3:18    Post subject: Netgear Nighthawk R7000 Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r47305 std (09/03/21)
Kernel: Linux 4.4.282 #3983 SMP Thu Sep 2 03:52:49 +07 2021 armv7l
Mode: Gateway, Wireless AP, Static Leases. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info.
Reset: Nope.
Previous: 08-30-2021-r47282
Status: Working so far, still testing.
Temperatures: CPU 66.9 °C / WL0 51.0 °C / WL1 56.2 °C
Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.



Speedtest.jpg
 Description:
Speedtest Over 5.8GHz Wireless.
 Filesize:  64.86 KB
 Viewed:  4194 Time(s)

Speedtest.jpg



Logs.txt
 Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!

nvram set console_debug=1

cat /var/log/messages (Initial Flash)
dmesg (Initial Flash)
cat /proc/cpuinfo
cat /tmp/dnsmasq.conf
cat /tmp/DNSCache.log
cat /tmp/unbound

Download
 Filename:  Logs.txt
 Filesize:  532.58 KB
 Downloaded:  159 Time(s)



Last edited by twindragon6 on Sat Sep 25, 2021 0:02; edited 3 times in total
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 353
Location: Szczecin, Poland EU

PostPosted: Sat Sep 04, 2021 15:25    Post subject: New Build - 09/03/2021 - r47305 Reply with quote
Router/Version: Netgear WNR3500L v2
Kernel: Linux 4.4.282 #11560 Fri Sep 3 04:37:04 +07 2021 mips
Reset: No
Mode: Internet gateway, WIFI AP, Dnsmasq
Issues: Poor WAN performance on stock CPU frequency. I'm start check problem and I have startlog dump and other log files in attachement.
Status: Working
Uptime: Actually ~30 mins and earlier many hours on this build.

Device is updated via ssh. It has poor WAN performance on stock CPU clock (~ 250 - 260 mbit/s download speed). I'm start to check problems and I have logs in attachement. Startlog have many bugs. I see length of firmware file is higher than earlier. That's unfavorable in this model. Generic performance is worse.



log_files.zip
 Description:
Many logs of WNR3500Lv2 on r47305 build.

Download
 Filename:  log_files.zip
 Filesize:  10.63 KB
 Downloaded:  113 Time(s)

Wildlion
DD-WRT Guru


Joined: 24 May 2016
Posts: 1407

PostPosted: Sat Sep 04, 2021 17:24    Post subject: Reply with quote
Router: Buffalo WZR-1750DHP
Firmware: buffalo-wzr-1750dhp-webflash.bin (v3.0-r47305 std)
Kernel: Linux 4.4.282 #3983 SMP Thu Sep 2 03:52:49 +07 2021 armv7l
Status: Working
Reset: No
Notes on configuration:

    Media Network
    DNSMasq
    Port Forwarding
    DHCP reservation
    DNSSEC
    SFE -- Disabled

Errors:

    None
grmcdorman
DD-WRT Novice


Joined: 15 Oct 2017
Posts: 41

PostPosted: Sat Sep 04, 2021 19:41    Post subject: Reply with quote
Router/Version: R7000P.
File/Kernel: netgear-r7000p-webflash.bin
Previous/Reset: 08-01-2021-r47117, no reset
Mode/Status: Gateway (PPPoE), DHCP, YaMon3. syslog-ng (opkg). Samba server configured but not used.
Issues/Errors: None observed. Download throughput is nominal. Samba now allows public (non-password) access.

Uptime at this point 1 hour.

EDIT: At some point SMB stopped working. Uptime is now 3 hours.
grmcdorman
DD-WRT Novice


Joined: 15 Oct 2017
Posts: 41

PostPosted: Sat Sep 04, 2021 21:54    Post subject: Reply with quote
Good to see this includes the very latest OpenSSL security fixes (1.1.1l). Thank you for the builds!
backroger
DD-WRT User


Joined: 07 Sep 2007
Posts: 73
Location: Philippines

PostPosted: Sun Sep 05, 2021 2:26    Post subject: Reply with quote
Router Model/Version: Asus RT-AC66U B1
File: asus_rt-ac68u-firmware.trx
Firmware: DD-WRT v3.0-r47305 std (09/03/21)
Kernel: Linux 4.4.282 #3983 SMP Thu Sep 2 03:52:49 +07 2021 armv7l
Previous: DD-WRT v3.0-r39572 std (04/19/19)
Reset: Yes
Mode: Gateway/VAP/AP-QoS (HTB+FQ_CODEL_FAST)
Uptime: 32 Min
Status: OK
Issues: None so far...
nolimitz
DD-WRT Guru


Joined: 26 Nov 2010
Posts: 597

PostPosted: Sun Sep 05, 2021 11:09    Post subject: Reply with quote
Router/Version: Netgear R7000P
Firmware: DD-WRT v3.0-r47305 std (09/03/21)
Kernel: Linux 4.4.282 #3989 SMP Fri Sep 3 04:06:54 +07 2021 armv7l
Reset: No
Mode: 2.4 & 5GHz AP, unbridged VAP, DHCP Server,DNSMasq, Wireguard client and Wireguard server, WAN Disabled
Status: OK
Uptime: 2 Days
Issues/Errors: none
dwardo
DD-WRT User


Joined: 07 Feb 2013
Posts: 126
Location: France

PostPosted: Sun Sep 05, 2021 13:07    Post subject: Reply with quote
Router/Version: TP-Link Archer C9 v1
File/Kernel: archer-c9v1-webflash.bin/Linux 4.4.282 #3985 SMP Fri Sep 3 03:41:20 +07 2021 armv7l
Previous/Reset: r47282/no
Mode/Status: Gateway/2.4GHz & 5GHz AP/Openvpn server/Wireguard server/DHCP server/DNS Server/Port forwarding/ipv4 & ipv6/CTF+FA
Issues/Errors: None detected yet
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Sun Sep 05, 2021 16:53    Post subject: Re: New Build - 09/03/2021 - r47305 Reply with quote
thommy181 wrote:
Router/Version: Netgear WNR3500L v2
Kernel: Linux 4.4.282 #11560 Fri Sep 3 04:37:04 +07 2021 mips
Reset: No
Mode: Internet gateway, WIFI AP, Dnsmasq
Issues: Poor WAN performance on stock CPU frequency. I'm start check problem and I have startlog dump and other log files in attachement.
Status: Working
Uptime: Actually ~30 mins and earlier many hours on this build.

Device is updated via ssh. It has poor WAN performance on stock CPU clock (~ 250 - 260 mbit/s download speed). I'm start to check problems and I have logs in attachement. Startlog have many bugs. I see length of firmware file is higher than earlier. That's unfavorable in this model. Generic performance is worse.



what you think is a bug is a diagnostic output. if you dont understand what a message means, dont declare it as bug. just ignore it and better do not watch diagnostic infos at all if you are not able to handle them. all these messages are totally normal. there is a good reason why these messages are only visible on the serial console. for everbody else, syslog is useful

_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 353
Location: Szczecin, Poland EU

PostPosted: Sun Sep 05, 2021 17:50    Post subject: Reply with quote
Really you think all that alerts are normal ? I'm wonder why device that have 480 MHz CPU and it's fully gigabit feature can't provide me 300 mbit of internet connection ? Router make many many unnecessary operations during start and work. It's simple answer, why performance is weak. What other users think about this ? I have plan to skip to other firmware. Situation is that and I think the OEM firmware will be better. I don't know why you write posts in rude tone ?
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum