Hi all.
I've tried a search but don't think I have much chance of finding this needle in such a big haystack.
Sorry if it's not in the right place.
I have a Draytek Vigor 2672n router.
It has been pre configured by a firm called 4com for another firm that went bump before they had even opened the box (it was still security sealed from 4com).
I've tried to reset using the reset button but nothing happens.
I tried the 30 30 30 method and sure enough, the power light blinked rapid, as it should during reset.
Unfortunately it still wasn't accesible via ethernet.
IPCONFIG is showing 192.168.1.1 but the browser just times out.
I have the WiFi password but can't connect.
I'm assuming 4com configured it so it can't be reset even by the 30 30 30 method.
Any last resorts before I give up?
Cheers.
Joined: 08 May 2018 Posts: 14126 Location: Texas, USA
Posted: Wed Sep 01, 2021 21:10 Post subject:
Nowhere in this entire forum is there any helpdesk support for non-DD-WRT supported routers (save and except ones that are candidates to be ported - see "known incompatible devices"). And the General forum is not for router help of any kind. All I can offer is that I hope your browser is using http:// instead of https:// to connect, as that is likely the only problem I can think of. Outside of that, sorry, this post is locked. Please read the forum rules and guidelines. Thanks.