Posted: Mon Aug 30, 2021 8:25 Post subject: New Build - 08/30/2021 - r47282
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Joined: 26 Mar 2013 Posts: 1857 Location: Hung Hom, Hong Kong
Posted: Mon Aug 30, 2021 10:32 Post subject: DD-WRT BS build 47282 and Asus RT-N
Router/Version:Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r47282 std (08/30/21)
Kernel: Linux 4.4.282 #3955 Mon Aug 30 03:00:16 +07 2021 armv7l
Previous: DD-WRT v3.0-r47206 std (08/19/21)
Mode: WAN @ DHCP, Wireless @ AP
Status: Working (
Not 24/7; Not using IPv6, VAP, VPN, CTF, FA;
DDNS OK; Port-forwarding OK;
Using NAS (ksmbd, minidlna), USB (jffs, opt), Recursive DNS Unbound;
Entware core (CPU: armv71) installed without problem
)
Reset: NO reset during firmware upgrade but cold boot
File:https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2021/08-30-2021-r47282/asus-rt-n18u/asus_rt-n18u-firmware.trx
Summary
Right after firmware upgrade, all functions are working. The Admin->Command bug in the last few builds had been fixed.
System init still tried to start ksmbd 4 times. Most would expect only 1-2 attempts.
Jan 1 08:00:24 RT-N18U-HST user.info wsdd2[1147]: starting.
Jan 1 08:00:24 RT-N18U-HST user.info : smbd : samba started
Aug 30 20:40:22 RT-N18U-HST user.info wsdd2[3197]: starting.
Aug 30 20:40:22 RT-N18U-HST user.info : smbd : samba started
Aug 30 20:40:23 RT-N18U-HST user.info : smbd : samba started
Aug 30 20:40:23 RT-N18U-HST user.info wsdd2[3257]: starting.
Aug 30 20:40:23 RT-N18U-HST user.info : smbd : samba started
Aug 30 20:40:23 RT-N18U-HST user.info wsdd2[3269]: starting.
Nothing to add after cold boot. But something about using custom Unbound config:
I had JFFS2 disabled, but two ext3 partitions in the USB drive mounted as /jffs and /opt respectively.
During startup, instead of using "/jffs/etc/unbound.conf" in a USB drive, DD-WRT used "/tmp/unbound.conf". It seemed to ignore /jffs that didn't come from JFFS2.
You needed to restart service unbound to correct it.
Firmware Size
From 30515200 (b.31277) to 24711168 (b.33555) = -5804032 bytes
From 24711168 (b.33555) to 27054080 (b.34929) = 2342912 bytes
From 27054080 (b.34929) to 26640384 (b.35531) = -413696 bytes
From 26640384 (b.35531) to 25022464 (b.36995) = -1617920 bytes
From 25022464 (b.36995) to 25427968 (b.37961) = 405504 bytes
From 25427968 (b.37961) to 25804800 (b.38570) = 376832 bytes
From 25804800 (b.38570) to 27574272 (b.38840) = 1769472 bytes
From 27574272 (b.38840) to 27774976 (b.39031) = 200704 bytes
From 27774976 (b.39031) to 27779072 (b.39137) = 4096 bytes
From 27779072 (b.39137) to 27779072 (b.39144) = 0 byte
.... more ....
From 25518080 (b.45000) to 25706496 (b.45592) = 188416 bytes
From 25706496 (b.45592) to 25870336 (b.46733) = 163840 bytes
From 25153536 (b.46733) to 25145344 (b.47000) = -8192 bytes
From 25145344 (b.47000) to 25153536 (b.46979) = 8192 bytes
From 25153536 (b.46979) to 25145344 (b.47090) = -8192 bytes
From 25145344 (b.47090) to 25149440 (b.47206) = 4096 bytes
From 25149440 (b.47206) to 25153536 (b.47282) = 4096 bytes
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Joined: 18 Mar 2014 Posts: 12889 Location: Netherlands
Posted: Mon Aug 30, 2021 12:13 Post subject:
Router Model: Netgear R6400v1
Firmware Version: DD-WRT v3.0-r47282M Community Build (08/30/21)
Kernel Version: Linux 4.4.282 #1 SMP Mon Aug 30 12:33:15 CEST 2021 armv7l
Upgraded from: DD-WRT v3.0-r47256M Community Build (08/25/21)
Reset: No not this time
Status: Up and running for almost 2 hours, basic setup as Gateway, static leases, Advanced routing, Port Forwarding, IPv4, DynDNS, 2.4 GHz and 5 GHz.
Running one WireGuard tunnel to Keepsolid and second WireGuard tunnel to own WG server for site-to-site, Third WireGuard tunnel to Mullvad, connection with PBR for Guest wifi. OpenVPN client tested and working.
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r47282 std (08/30/21)
Kernel: Linux 4.4.282 #3951 SMP Mon Aug 30 02:14:12 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound & CTF & FA Enabled. NAT/QoS Off
Reset: No, not this time
Previous : r47256
Upgrade: Web and 1st succeed without reset.
Temperatures CPU 79.7 °C / WL1 57.4 °C
Load: 0.08, 0.04, 0.01
Uptime 5h20m
Errors: No, not at this moment
Could not update firmware via WebUI in Chrome. Progress bar just keeps rotating. Never successfully uploads and reboots. Tried after manual reboot and same thing.
EDIT: Sorry, wrong version posted.
I am on dd-wrt.v24-47256_NEWD-2_K3.x_mega-nv64k
EDIT #2: Updating via Firefox went fine.
Last edited by scans on Mon Aug 30, 2021 21:16; edited 2 times in total
Could not update firmware via WebUI in Chrome. Progress bar just keeps rotating. Never successfully uploads and reboots. Tried after manual reboot and same thing.
EDIT: Sorry, wrong version posted.
I am on dd-wrt.v24-47256_NEWD-2_K3.x_mega-nv64k
Joined: 29 Sep 2020 Posts: 260 Location: United States
Posted: Mon Aug 30, 2021 23:57 Post subject:
Router Model: Netgear R7000P
Firmware Version: DD-WRT v3.0-r47282 std (08/30/21)
Kernel Version: Linux 4.4.282 #3957 SMP Mon Aug 30 03:17:04 +07 2021 armv7l
Reset: no
Operating Mode/Setup: Gateway / AP Unbound JFFS2
Status: running well. thanks BS and dd-wrt community
*
i noticed there was an update for unbound
https://nlnetlabs.nl/projects/unbound/download/
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r47282 std (08/30/21)
Kernel: Linux 4.4.282 #3951 SMP Mon Aug 30 02:14:12 +07 2021 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: Ok, since release.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-47282_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r47282 big (08/30/21)
Kernel: Linux 4.4.282 #11462 Mon Aug 30 03:49:26 +07 2021 mips
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Ok, since release.
Firmware: v3.0-r47282 std (08/30/21)
Router/Version: Netgear R7000 Kernel: Linux 4.4.282 #3951 SMP Mon Aug 30 02:14:12 +07 2021 armv7l
Previous: v3.0-r47256 std (08/25/21)
Mode/Status: AP wired and wireless / Up and running for 30 hours
Reset: Soft boot before and after upgrade
Temperatures: CPU 62.5 °C / WL0 47.2 °C / WL1 52.3 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec. Nothing unexpected in the syslog.
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Tue Aug 31, 2021 23:29 Post subject:
Router/Version: Asus RT-N12D
File: dd-wrt.v24-#####_NEWD-2_K3.x_mega.bin
Firmware: DD-WRT v3.0-r47282 mega (08/30/21)
Kernel: Linux 4.4.282 #11466 Mon Aug 30 03:55:29 +07 2021 mips
Mode: OpenVPN Gateway
Previous: r47256
Reset?: N
Status: Working
Joined: 31 Jul 2021 Posts: 2146 Location: All over YOUR webs
Posted: Wed Sep 01, 2021 8:57 Post subject:
Router/Version: Asus RT-AC68U E1 Misidentified as C1
File/Kernel: Linux 4.4.282 #3951 SMP Mon Aug 30 02:14:12 +07 2021 armv7l
Previous/Reset: DD-WRT v3.0-r47256 std (08/25/21) / none at first.
Mode/Status: Gateway \ semi working
Issues/Errors: Unable to Connect to WAN properly
Previous FW DD-WRT v3.0-r47256 works WAN wise fully but r47282 for some reason indicates its connected to internet, yet internet is not accessible from anywhere, no pings respond to WAN
Tried power cycling modem/router, resets nothing made Internet fully accessible.
Reverted to v3.0-r47256 and WAN is back again immediately.
Router/Version: Netgear R6250
File/Kernel: Previous/Reset: None
Mode/Status: Router
Issues/Errors: All is working well so far, including the previously broken Access Restrictions tab. _________________ Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate
Wireless 5ghz only
Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r55779
Features in use: multiple VLANs over single trunk port
Linksys EA8500 WDS Station x2 - DD-WRT r55799
Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port. DD-WRT r55779
OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.