Posted: Wed Aug 25, 2021 6:24 Post subject: New Build - 08/25/2021 - r47256
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Wed Aug 25, 2021 11:21 Post subject:
Router Model: Netgear R6400v2, board_id: U12H332T
Firmware Version: DD-WRT v3.0-r47256M Community Build (08/25/21)
Kernel Version: Linux 4.4.281 #1 SMP Wed Aug 25 11:43:40 CEST 2021 armv7l
Upgraded from: DD-WRT v3.0-r47183M Community Build (08/17/21)
Reset: No not this time
Status: Up and running for 2 hours, basic setup as Gateway, static leases, OpenVPN client with Policy Based Routing up and running, 2,4GHz and 5Ghz working, USB storage NAS working, OpenVPN server working, WireGuard server working with 8 clients (phones , windows and two other routers for site-to-site setup).
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Wed Aug 25, 2021 12:42 Post subject:
Router/Version: Asus RT-N12D
File: dd-wrt.v24-#####_NEWD-2_K3.x_mega.bin
Firmware: DD-WRT v3.0-r47256 mega (08/25/21)
Kernel: Linux 4.4.281 #11354 Wed Aug 25 03:28:59 +07 2021 mips
Mode: OpenVPN Gateway
Previous: r47142
Reset?: N
Status: Working
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Wed Aug 25, 2021 13:01 Post subject:
Router Model: Netgear R6400v1
Firmware Version: DD-WRT v3.0-r47256M Community Build (08/25/21)
Kernel Version: Linux 4.4.281 #1 SMP Wed Aug 25 11:43:40 CEST 2021 armv7l
Upgraded from: DD-WRT v3.0-r47183M Community Build (08/17/21)
Reset: No not this time
Status: Up and running for 3 hours, basic setup as Gateway, static leases, Advanced routing, Port Forwarding, IPv4, DynDNS, 2.4 GHz and 5 GHz.
Running one WireGuard tunnel to Keepsolid and second WireGuard tunnel to own WG server for site-to-site connection. OpenVPN client tested and working
Errors: No, but I got some things in syslog I am not sure about:
Jan 1 01:00:11 R6400v1 kern.warn kernel: Ignoring unrecognised tag 0x00000000
Jan 1 01:00:11 R6400v1 kern.warn kernel: Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
Jan 1 01:00:11 R6400v1 kern.err kernel: smp_twd: clock not found -2
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Wed Aug 25, 2021 15:36 Post subject:
Admin -> Commands ("http://192.168.1.1/Diagnostics.asp") was broken. After entering "lsmod" into the textbox and hit [Run Command], the browser flashed, then I was redirected to "http://192.168.1.1/Ping.asp" with a blank webpage, instead of "http://192.168.1.1/apply.cgi"!! This bug was reported in build 27225 as well.
Basic functions were working anyway.
Update:
Problem remained after cold start. Switching browser to IE and Edge didn't resolve the problem, both were redirected to "Ping.asp" instead of "apply.asp".
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r47256 std (08/25/21)
Kernel: Linux 4.4.281 #3917 SMP Tue Aug 24 03:08:40 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound & CTF & FA Enabled. NAT/QoS Off
Reset: No, not this time
Previous : r47225
Upgrade: Web and 1st succeed without reset.
Temperatures CPU 83 °C / WL1 58.7 °C
Load: 0.01, 0.02, 0.01
Uptime 8h
Errors: No, not at this moment.
Router/Version: ASUS RT-AC68U
File/Kernel: DD-WRT v3.0-r47117 std (08/25/21)
Previous/Reset: r47117, r46974 and previously r30880M
Mode/Status: AP
Services Used: 2.4 GHz / 5.0 GHz / LAN all bridged, isolated guest network on 2.4 GHz, DHCPd for the two networks, MAC filtering, static leases
Issues/Errors: MAC filtering for both wl0 and wl1 is working on this version (I use it as permit feature). On r30880M MAC Filter GUI allowed to implement similar MAC filtering features (permit / restrict) for wl0.1 but I could not find it on this version (and neither on r47117 and r46974, on which MAC filter did not work properly). In any case, it seems guest network (wl0.1) is not applying filtering (this is what I wanted, so it is fine for me).
Router/Version: Netgear R6250
File/Kernel: r47256
Previous/Reset: Full Reset
Mode/Status: Router
Issues/Errors: Access Restrictions issue still remains from previous build, r47225. You can only add/edit #1. Selecting any other number always bounces back to #1. _________________ Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate
Wireless 5ghz only
Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r55779
Features in use: multiple VLANs over single trunk port
Linksys EA8500 WDS Station x2 - DD-WRT r55799
Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port. DD-WRT r55779
OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Thu Aug 26, 2021 17:46 Post subject: New Build - 08/25/2021 - r47256
Router/Version: Netgear WNR3500L v2
Kernel: Linux 4.4.281 #11338 Wed Aug 25 03:07:43 +07 2021 mips
Reset: No
Mode: Internet gateway, WIFI AP, Dnsmasq
Issues: Some yellow marked events in syslog. Nothing significant
Status: Working
Uptime: ~35 h
Device updated via ssh. Router working rather good, all services without problems. Performance of internet connection is correct with ISP plan.
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r47256 std (08/25/21)
Kernel: Linux 4.4.281 #3921 Wed Aug 25 02:36:07 +07 2021 armv7l
Mode: gateway
Previous: r47225
Reset: no
Status: working
Errors: webif Administration -> Commands is still broken. Once Run Commands button is pressed blank Ping.asp loads.
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Sun Aug 29, 2021 5:39 Post subject:
mwchang wrote:
Admin -> Commands ("http://192.168.1.1/Diagnostics.asp") was broken. After entering "lsmod" into the textbox and hit [Run Command], the browser flashed, then I was redirected to "http://192.168.1.1/Ping.asp" with a blank webpage, instead of "http://192.168.1.1/apply.cgi"!! This bug was reported in build 27225 as well.
Basic functions were working anyway.
Update:
Problem remained after cold start. Switching browser to IE and Edge didn't resolve the problem, both were redirected to "Ping.asp" instead of "apply.asp".
no page will end up in apply.cgi. they all should land back on the original page like Diagnostics.asp. so you can use the page refresh function of the browser once you pressed apply or save. this works on all pages. but just on this i missed maybe something. not a big deal. the command you entered was executed anyway. the issue will be fixed in next version _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
