Posted: Thu Aug 19, 2021 6:13 Post subject: New Build - 08/19/2021 - r47206
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Netgear WNDR3700 V4
DD-WRT v3.0-r47206 std (08/19/21)
Linux 3.18.140-d6 #123482 Thu Aug 19 06:45:00 +07 2021 mips
GUI install over r47153
switch / OVPN server ... all working good
uptmie 8:42
#
Linksys EA8500...main gateway
DD-WRT v3.0-r47206 std (08/19/21)
Linux 4.9.280 #377 SMP Thu Aug 19 02:04:18 +07 2021 armv7l
GUI install over r47153
OVPN server
static DHCP
samba share ext4
Ignore WAN DNS
VLAN on 1 port with wlan0.1 via br1
DNS target for br1
HFSC CAKE
all very good
---
Edit: all still very nice
Last edited by mrjcd on Thu Aug 19, 2021 19:33; edited 1 time in total
Posted: Thu Aug 19, 2021 12:23 Post subject: [TP-Link Archer C7 v2] Working...
Router/Version: TP-Link Archer C7 v2
File: tplink_archer-c7-v2-US.bin [DD-WRT v3.0-r47206 std (08/19/21)]
Kernel: Linux 3.18.140-d6 #123460 Thu Aug 19 06:01:17 +07 2021 mips
Previous: tplink_archer-c7-v2-US.bin [DD-WRT v3.0-r47033 std (07/08/21)]
Reset: No
Mode: Gateway Router (with WiFi disabled; separate AP connected via LAN)
Status: Soft-reboot issue reported on r47182 is gone. All seems to be working well. Uptime: ~1 hour
Temperatures: Not available [WiFi disabled]
Joined: 06 Jun 2006 Posts: 7463 Location: Dresden, Germany
Posted: Fri Aug 20, 2021 4:30 Post subject: Re: wrong model
dewayne221 wrote:
I have a netgear xr450 under status tab it say model is xr500 it was like that last build too
and it will always be like that. the xr450 is identical with the xr500. the firmware in the xr450 folder is a xr500 firmware. the only difference between these both devices is the name and the original firmware has some features disabled. dd-wrt does not disable features. so have fun, your device is a xr500. or lets say its a r7800 which is identical too of course. originally the xr450 has turboqam disabled for 2.4 ghz. this is not the case anymore _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Router/Version: Netgear R7800
File/Kernel: Linux 4.9.280
Previous/Reset: CLI update from r47182 / No reset
Mode: Gateway
Issues/Errors: Works fine no errors
Using Vanilla FW on 2.4/5GHz, WAN, QoS, Wireguard tunnel, DDNS, DNSmasq .
Posted: Sat Aug 21, 2021 12:08 Post subject: Re: wrong model
BrainSlayer wrote:
dewayne221 wrote:
I have a netgear xr450 under status tab it say model is xr500 it was like that last build too
and it will always be like that. the xr450 is identical with the xr500. the firmware in the xr450 folder is a xr500 firmware. the only difference between these both devices is the name and the original firmware has some features disabled. dd-wrt does not disable features. so have fun, your device is a xr500. or lets say its a r7800 which is identical too of course. originally the xr450 has turboqam disabled for 2.4 ghz. this is not the case anymore
Look at BS, giving free modem upgrades!! _________________ -Tim
Joined: 07 Jun 2007 Posts: 244 Location: La Paz, Bolivia
Posted: Sat Aug 21, 2021 22:58 Post subject:
AP 1
Router/Version: TP-Link ARCHER-A7 v5/DD-WRT v3.0-r47206 std (08/19/21)
File/Kernel: Linux 3.18.140-d6 #123466 Thu Aug 19 06:12:42 +07 2021 mips
update method: GUI install (CLI update never worked for me)
Previous/Reset: DD-WRT v3.0-r47117 std (08/01/21)
Mode/Status: AP connected via LAN, SFE, DHCP disable, WIFI 2.4/5ghz - Vanilla , MAC filter
Reset: No
Uptime: 24 Hours
Status: at the moment everything OK, Led lights problem remains
Issues/Errors: at the moment everything OK, Led lights problem remains
AP 2
Router/Version: TP-Link ARCHER-A7 v5/DD-WRT v3.0-r47206 std (08/19/21)
File/Kernel: Linux 3.18.140-d6 #123466 Thu Aug 19 06:12:42 +07 2021 mips
update method: GUI install (CLI update never worked for me)
Previous/Reset: DD-WRT v3.0-r47117 std (08/01/21)
Mode/Status: AP connected via LAN, DHCP disable, WIFI 2.4/5ghz - Vanilla, MAC filter, Wifi Printer/scanner
Reset: No
Uptime: 12 Hours
Status: at the moment everything OK, Led lights problem remains
Issues/Errors: at the moment everything OK, Led lights problem remains
note: I wish there was a script to fix or at least to turn off the led lights _________________ Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2 (failover)
Joined: 07 Jun 2007 Posts: 244 Location: La Paz, Bolivia
Posted: Sun Aug 22, 2021 14:17 Post subject:
AP 3
Router TP-Link ARCHER-C7 v2
Version: DD-WRT v3.0-r47206 std (08/19/21)
Kernel: Linux 3.18.140-d6 #123460 Thu Aug 19 06:01:17 +07 2021 mips
update method: GUI install (CLI update never worked for me)
Previous: DD-WRT v3.0-r47000 std (06/28/21)
Mode: AP connected via LAN, DHCP disable, WIFI 2.4/5ghz - Vanilla , MAC filter, conected port LAN to other AP A7 WAN
Reset: No
Uptime: 3 Hours
Temperatures: wlan1 40 °C
Status: at the moment everything OK
Issues/Errors: at the moment everything OK _________________ Fiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1
2G,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2 (failover)