AndyOxon
DD-WRT User
Joined: 16 Aug 2021
Posts: 81
Location: Oxford, UK.
|
 Posted: Tue Aug 17, 2021 12:45 Post subject: |
 |
Here is further info, in case it's useful...
I am using PuTTY on a serial connection, and TFTP2.
This is the console output when putting NG's WNDR4500v2-V1.0.0.72_1.0.45.chk:
| Code: | CFE> flash -noheader : flash1.trx
Reading :: Done. 12812346 bytes read
Programming...done. 12812346 bytes written
*** command status = 0
CFE> reboot▒Decompressing...done
CFE for WNDR4500 version: v1.0.4
Build Date: Mon Jan 14 16:04:19 CST 2013
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
Found an ST compatible serial flash with 32 64KB blocks; total size 2MB
Found a Samsung NAND flash with 2048B pages or 128KB blocks; total size 128MB
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138
CPU type 0x19749: 600MHz
Tot mem: 131072 KBytes
Committing NVRAM...done
Waiting for reset button release...donDecompressing...done
CFE for WNDR4500 version: v1.0.4
Build Date: Mon Jan 14 16:04:19 CST 2013
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
Found an ST compatible serial flash with 32 64KB blocks; total size 2MB
Found a Samsung NAND flash with 2048B pages or 128KB blocks; total size 128MB
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138
CPU type 0x19749: 600MHz
Tot mem: 131072 KBytes
Device eth0: hwaddr C4-04-15-05-22-8B, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Checking crc...Invalid boot block on disk
Device eth0 has been deactivated.
Device eth0: hwaddr C4-04-15-05-22-8B, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Start TFTP server
Reading :: Done. 12812346 bytes read
Programming...done. 12812346 bytes written
Decompressing...done
CFE for WNDR4500 version: v1.0.4
Build Date: Mon Jan 14 16:04:19 CST 2013
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
Found an ST compatible serial flash with 32 64KB blocks; total size 2MB
Found a Samsung NAND flash with 2048B pages or 128KB blocks; total size 128MB
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138
CPU type 0x19749: 600MHz
Tot mem: 131072 KBytes
Device eth0: hwaddr C4-04-15-05-22-8B, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Checking crc...Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
Loading: ....... 4239494 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.22 (builder@production) (gcc version 4.2.3) #223 PREEMPT Fri May 4 07:43:59 CST 2018
CPU revision is: 00019749
Found an ST compatible serial flash with 32 64KB blocks; total size 2MB
Determined physical RAM map:
memory: 07fff000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0 -> 32767
HighMem 32767 -> 32767
early_node_map[1] active PFN ranges
0: 0 -> 32767
Built 1 zonelists. Total pages: 32767
Kernel command line: root=/dev/mtdblock16 console=ttyS0,115200 init=/sbin/preinit
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
CPU: BCM5300 rev 1 at 600 MHz
Using 300.000 MHz high precision timer.
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 125084k/131068k available (3243k kernel code, 5836k reserved, 664k data, 232k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Initializing host
PCI: Reset RC
PCI: Initializing host
PCI: Reset RC
PCI: Fixing up bus 0
PCI/PCIe coreunit 0 is set to bus 1.
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 0000:01:00.1 (0004 -> 0006)
PCI: Fixing up bus 1
PCI/PCIe coreunit 1 is set to bus 2.
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 0000:02:00.1 (0004 -> 0006)
PCI: Fixing up bus 2
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
fuse init (API version 7.8)
io scheduler noop registered (default)
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 8) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
PPP generic driver version 2.4.2
NET: Registered protocol family 24
PPPoL2TP kernel driver, V0.17
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
pflash: found no supported devices
sflash: Couldn't find valid ROM disk image
Creating 15 MTD partitions on "sflash":
0x00000000-0x00200000 : "boot"
0x00000000-0x00140000 : "linux"
0x00000000-0x00200000 : "rootfs"
0x00140000-0x00150000 : "ML1"
0x00150000-0x00160000 : "ML2"
0x00160000-0x00170000 : "ML3"
0x00170000-0x00180000 : "ML4"
0x00180000-0x00190000 : "ML5"
0x00190000-0x001a0000 : "ML6"
0x001a0000-0x001b0000 : "ML7"
0x001b0000-0x001c0000 : "T_Meter1"
0x001c0000-0x001d0000 : "T_Meter2"
0x001d0000-0x001e0000 : "POT"
0x001e0000-0x001f0000 : "board_data"
0x001f0000-0x00200000 : "nvram"
Found a Samsung NAND flash with 2048B pages or 128KB blocks; total size 128MB
lookup_nflash_rootfs_offset: offset = 0x0
nflash: squash filesystem with lzma found at block 12
Creating 2 MTD partitions on "nflash":
0x00000000-0x02000000 : "linux"
0x00180764-0x02000000 : "rootfs"
NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
Creating 2 MTD partitions on "brcmnand":
0x00000000-0x02000000 : "trx"
0x02000000-0x07f00000 : "brcmnand"
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
u32 classifier
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
6WIND/LSIIT IPv6 multicast forwarding 0.1 plus PIM-SM/SSM with *BSD API
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 232k freed
Warning: unable to open an initial console.
Failed to execute /init
[sighandler]: No more events to be processed, quitting.
[cleanup]: Waiting for children.
[cleanup]: All children terminated.
Restoring defaults...Reading board data...
WSC UUID: 0xc2f0d021945eb305349a4da2069364a5
NTP synchronized date/time: Tue Mar 17 15:12:06 2015
MAC address of 1st STA connected: 28-E3-47-81-1C-ED
### main:1091 Set Normal Power!
Doing nvram commit by pid 1 !
done
Reading board data...
WSC UUID: 0xc2f0d021945eb305349a4da2069364a5
NTP synchronized date/time: Tue Mar 17 15:12:06 2015
MAC address of 1st STA connected: 28-E3-47-81-1C-ED
### main:1091 Set Normal Power!
Initialise conn table 2048 entries
insmod: usbcore.ko: no module by that name found
insmod: wl_high.ko: no module by that name found
eth3: cmd=14: No such device
wl1 not up in 3 sec
Hit enter to continue...killall: upnp: no process killed
upnp: No such file or directory
WARNING: console log level set to 1
Doing nvram commit by pid 2155 !
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: selected channel spec: 0x1001
radarthrs
Set Radar threshold for both 20 & 40MHz & 80MHz BW:
order as thresh0_20_lo, thresh1_20_lo, thresh0_40_lo, thresh1_40_lo
thresh0_80_lo, thresh1_80_lo, thresh0_20_hi, thresh1_20_hi
thresh0_40_hi, thresh1_40_hi, thresh0_80_hi, thresh1_80_hi
Reading board data...
WSC UUID: 0xc2f0d021945eb305349a4da2069364a5
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acosFW_accessCtrlEnable 2684 bEnable: 0
acosFW_accessCtrlMode 2691 mode: 1
acosFW_accessCtrlConfig 2698
acsd: scan in progress ...
killall: udhcpd: no process killed
info, udhcp server (v0.9.8) started
error, unable to parse 'option wins '
error, unable to parse 'option domain '
acsd: scan in progress ...
mevent start...
opened loopback socket 4
acsd: selected channel spec: 0x1001
POT integrity check OK.
POT time is up.
ACSD >>acsd_svr_socket_init(82): Socket bind failed: Address already in use
Doing nvram commit by pid 2316 !
Can't find handler for ASP command: eco_get_redirect_link();
Can't find handler for ASP command: cdl_cgi_set_hijack(0);
Can't find handler for ASP command: check_is_index()
Doing nvram commit by pid 2319 !
Can't find handler for ASP command: cdl_cgi_set_hijack(1);
Doing nvram commit by pid 2324 !
Doing nvram commit by pid 2329 !
Doing nvram commit by pid 2335 !
Doing nvram commit by pid 2341 !
Doing nvram commit by pid 2348 !
Doing nvram commit by pid 2353 !
Doing nvram commit by pid 2359 !
Doing nvram commit by pid 2363 !
insmod: usbcore.ko: no module by that name found
insmod: cannot insert '/lib/modules/2.6.22/kernel/drivers/usb/host/ehci-hcd.ko': Success (17)
insmod: GPL_NetUSB.ko: no module by that name found
mount: mounting none on /proc/bus/usb failed: Device or resource busy
IOCTL_AG_REGION_SET: English
Start DHCP client daemon
info, udhcp client (v0.9.8) started
eth0: No such process
Info: No FWPT default policies.
agnat QOS disable!
rmmod: l7_filter
ioctl(BRCTL_SET_BCMCTF_ENABLE): Operation not supported
ioctl(BRCTL_SET_BCMCTF_ENABLE): Operation not supported
rmmod: /lib/modules/2.6.22/kernel/lib/AccessCntl.ko
[AFP]: 0 partitions found.
[AFP]: disk mountd:0 hfsplus mounted:0
[AFP]: no disk mounted.
killall: bftpd: no process killed
httpd: socket bound in 0.0.0.0:80.
httpd: socket bound in 0.0.0.0:443.
route: ioctl 0x890c failed: No such process
killall: dhcp6c: no process killed
killall: IPv6-relay: no process killed
killall: pppdv6: no process killed
killall: rtsol: no process killed
killall: dhcp6s: no process killed
killall: radvd: no process killed
2321:error:1408A0C1:SSL routines:SSL3_GET_CLIENT_HELLO:no shared cipher:s3_srvr.c:888:
ifconfig: invalid number ''
ifconfig: invalid number ''
route: ioctl 0x890c failed: No such process
killall: dhcp6s: no process killed
killall: radvd: no process killed
Hit enter to continue...minidlan :scan files
minidlan:scan finished |
This results in a seemingly working router.
So again, with serial & TFTP2 and Kong's dd-wrt.v24-K3_WNDR4500V2.chk and after holding the reset button for 20 secs (for good measure):
| Code: | CFE> nvram erase
*** command status = 0
CFE> flash -noheader : flash1.trx
Reading :: Done. 7032890 bytes read
Programming...done. 7032890 bytes written
*** command status = 0
CFE> go
Checking crc...Invalid boot block on disk
Device eth0 has been deactivated.
Device eth0: hwaddr C4-04-15-05-22-8B, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Start TFTP server
Reading :: Done. 7032890 bytes read
Programming...done. 7032890 bytes written
Decompressing...done
CFE for WNDR4500 version: v1.0.4
Build Date: Mon Jan 14 16:04:19 CST 2013
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
Found an ST compatible serial flash with 32 64KB blocks; total size 2MB
Found a Samsung NAND flash with 2048B pages or 128KB blocks; total size 128MB
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138
CPU type 0x19749: 600MHz
Tot mem: 131072 KBytes
Committing NVRAM...done
Waiting for reset button release...donDecompressing...done
CFE for WNDR4500 version: v1.0.4
Build Date: Mon Jan 14 16:04:19 CST 2013
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
Found an ST compatible serial flash with 32 64KB blocks; total size 2MB
Found a Samsung NAND flash with 2048B pages or 128KB blocks; total size 128MB
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138
CPU type 0x19749: 600MHz
Tot mem: 131072 KBytes
Device eth0: hwaddr C4-04-15-05-22-8B, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Checking crc...Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
Loading: ....... 4125056 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 3.11.10 (bluebat@linux-vm-os64) (gcc version 4.7.3 20121001 (prerelease) (Linaro GCC 4.7-2012.10) ) #110 Thu Apr 17 21:26:27 CEST 2014
CPU revision is: 00019749 (MIPS 74Kc)
Found an ST compatible serial flash with 32 64KB blocks; total size 2MB
found nvram at 1F0000
something wrong here. do not remap
Determined physical RAM map:
memory: 07fff000 @ 00000000 (usable)
Zone ranges:
Normal [mem 0x00000000-0x07ffefff]
HighMem empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00000000-0x07ffefff]
Primary instruction cache 32kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32511
Kernel command line: console=ttyS0,115200 root=1f05 rootfstype=squashfs noinitrd init=/bin/sh
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Writing ErrCtl register=80000ee0
Readback ErrCtl register=80000ee0
Cache parity protection enabled
Memory: 125264K/131068K available (3132K kernel code, 224K rwdata, 436K rodata, 292K init, 516K bss, 5804K reserved, 0K highmem)
NR_IRQS:128
CPU: BCM5300 rev 1 at 600 MHz
bcm947xx_clockevent_set_mode: 1
bcm947xx_clockevent_set_mode: 3
console [ttyS0] enabled
Calibrating delay loop... 299.82 BogoMIPS (lpj=1499136)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
PCI: Initializing host
PCI: Reset RC
PCI: Initializing host
PCI: Reset RC
PCI: scanning bus 0
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
PCI: Fixing up bus 0
pci 0000:00:05.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:00:06.0: bridge configuration invalid ([bus 00-00]), reconfiguring
PCI/PCIe coreunit 0 is set to bus 1.
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 0000:01:00.1 (0004 -> 0006)
PCI: Fixing up bus 1
PCI/PCIe coreunit 1 is set to bus 2.
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 0000:02:00.1 (0004 -> 0006)
PCI: Fixing up bus 2
Switched to clocksource MIPS
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
R6300 GPIO Init
squashfs: version 3.0 (2006/03/15) Phillip Lougher
msgmni has been set to 244
alg: No test for stdrng (krng)
io scheduler noop registered (default)
HDLC line discipline maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a U6_16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 8) is a U6_16550A
brd: module loaded
pflash: found no supported devices
found WNDR4500 / R6300
try to find cfe size up to 2097152
no filesys. assume nflash devices
bootloader size: 2097152
nvram size: 65536
Creating 2 MTD partitions on "bcmsflash":
0x000000000000-0x000000200000 : "cfe"
0x0000001f0000-0x000000200000 : "nvram"
Found a Samsung NAND flash with 2048B pages or 128KB blocks; total size 128MB
NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
nand_read_bbt: bad block at 0x000000060000
nand_read_bbt: bad block at 0x000004c40000
nand_read_bbt: bad block at 0x0000055a0000
Creating 2 MTD partitions on "brcmnand":
0x000000000000-0x000002000000 : "linux"
0x000002000000-0x000007f00000 : "ddwrt"
lookup_nflash_rootfs_offset: offset = 0x0
found trx at 0, len =7032832
scan filesys at 184000
Creating 2 MTD partitions on "nflash":
0x000000000000-0x000002000000 : "nandimage"
0x000002000000-0x000008000000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
add netgear bosrddata for pflash if exists
add netgear bosrddata for sflash if exists
Creating 1 MTD partitions on "bcmsflash":
0x0000001e0000-0x0000001f0000 : "board_data"
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
Broadcom Watchdog Timer: 0.07 initialized.
GACT probability NOT on
Mirror/redirect action on
Failed to load ipt action
Simple TC action Loaded
netem: version 1.3
u32 classifier
Performance counters on
input device check on
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1957 buckets, 7828 max)
nf_conntrack_rtsp v0.6.21 loading
xt_time: kernel timezone is -0000
ip_set: protocol 6
gre: GRE over IPv4 demultiplexor driver
nf_nat_rtsp v0.6.21 loading
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: bic registered
TCP: cubic registered
TCP: westwood registered
TCP: highspeed registered
TCP: hybla registered
TCP: htcp registered
TCP: vegas registered
TCP: veno registered
TCP: scalable registered
TCP: lp registered
TCP: yeah registered
TCP: illinois registered
NET: Registered protocol family 17
Bridge firewalling registered
8021q: 802.1Q VLAN Support v1.8
startup nvram driver
found nvram
List of all partitions:
1f00 2048 mtdblock0 (driver?)
1f01 64 mtdblock1 (driver?)
1f02 32768 mtdblock2 (driver?)
1f03 97280 mtdblock3 (driver?)
1f04 32768 mtdblock4 (driver?)
1f05 98304 mtdblock5 (driver?)
1f06 64 mtdblock6 (driver?)
No filesystem could mount root, tried: squashfs
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,5)
Rebooting in 3 seconds..Please stand by while rebooting the system...
Decompressing...done |
You can copy & paste the above a number of times to replicate the console output I have here lol.
Further suggestions welcome. |
|
