Posted: Thu Jul 29, 2021 6:09 Post subject: New Build - 07/29/2021 - r47097
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Thu Jul 29, 2021 16:26 Post subject: New Build - 07/29/2021 - r47097
Router/Version: Netgear WNR3500L v2
Kernel: Linux 4.4.276 #10739 Thu Jul 29 03:45:52 +07 2021 mips
Reset: No
Mode: Internet gateway, WIFI AP, Dnsmasq server
Issues: SFE and / or CTF feature start many times
Status: Working
Uptime: more than 4h
Router is updated via ssh. It works rather good. In logs I'm found the SFE feature is launched many times. I'm attach syslog for fix possible issues.
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r47097 std (07/29/21) (prev. DD-WRT v3.0-r47040 std (07/12/21))
Kernel: Linux 4.4.276 #3725 SMP Mon Jul 26 03:02:07 +07 2021 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: Ok, up 2:11h.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-47097_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r47097 big (07/29/21) (prev. DD-WRT v3.0-r47040 big (07/12/21))
Kernel: Linux 4.4.276 #10751 Thu Jul 29 04:01:19 +07 2021 mips
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Ok, up 2:10h.
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Fri Jul 30, 2021 10:29 Post subject:
Router Model: Netgear R6400v1
Firmware Version: DD-WRT v3.0-r47097M Community Build (07/28/21)
Kernel Version: Linux 4.4.276 #1 SMP Wed Jul 28 17:40:13 CEST 2021 armv7l
Upgraded from: DD-WRT v3.0-r47090M Community Build (07/26/21)
Reset: No not this time
Status: Up and running for 24 hours, basic setup as Gateway, static leases, IPv4.
Running one WireGuard tunnel to Keepsolid and second WireGuard tunnel to own WG server for site-to-site connection. OpenVPN client tested and working.
Router/Version: Asus RT-AC66U B1 H/W Ver. B2
Kernel: Linux 4.4.276 #3725 SMP Mon Jul 26 03:02:07 +07 2021 armv7l
Firmware/Reset: asus_rt-ac68u-firmware-2021-07-29-47097, no
Previous/Reset: asus_rt-ac68u-firmware-2020-11-03-44715, no
Previous/Reset: asus_rt-ac68u-firmware-2018-06-29-36247, yes
Mode/Status: Gateway, Switch, WAP 2.4/5ghz, CTF & FA
Issues/Errors: None, uptime 90 mins
Will update if the situation changes, or configuration errors are discovered.
When initially flashing to 36247 (2018-06-29) from stock, the device entered a boot loop. Using the ARM hard reset procedure cleared the issue. Original IP is 192.168.50.1 (recovery mode). After flashing, the ARM hard reset procedure will boot to recovery mode.
Code:
Bad eraseblock 459 at 0x000003960000
When upgrading to 47097 (2021-07-29), the device appeared to boot loop once after the original reset, but returned to normal operation after that. Not certain if the issue cleared itself, or after a ping request, or whether it temporarily booted to recovery mode and timed out. The recovery mode UI came up after flashing reboot, so it may be related to that.
Code:
Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is likely caused by a firmware/bootloader bug.