Posted: Mon Jul 19, 2021 11:11 Post subject: RETRACTED New Build - 07/19/2021 - r47073
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Joined: 08 May 2018 Posts: 14244 Location: Texas, USA
Posted: Mon Jul 19, 2021 13:22 Post subject:
I could've sworn there was discussion regarding encryption and not using it.. default option is encryption off, no? Only way to start over with samba configs is to reset the router completely to defaults and start from scratch _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
I've just followed mwchang's settings and then kernel-panic69 say I need to reset my router anyway it's still working for me
mwchang wrote:
One thing: the
"Public" share option was never working.
It definitely used to work a few months ago (or last year?) but then one day it stopped working and I still remember someone kept complaining about that for a while until BS stepped in to explain but I didn't really care about that so I didn't keep in mind what was the conclusion. Probably kernel-panic69 still can dig up the old posts.
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Mon Jul 19, 2021 15:35 Post subject:
kernel-panic69 wrote:
I knew I should have included @mwchang; I was not responding or talking directly to you, @IONK
I have a few things to try tomorrow ....
Anyway, the Samba 3 in build 46979 is working fine....
kernel-panic69 wrote:
I could've sworn there was discussion regarding encryption and not using it.. default option is encryption off, no? Only way to start over with samba configs is to reset the router completely to defaults and start from scratch
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r47073 std (07/19/21)
Kernel: Linux 4.4.274 #3689 SMP Mon Jul 19 13:42:08 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound
Reset: No, not this time
Previous : r47040
Upgrade: Web and 1st succeed without reset.
Temperatures CPU 79.1 °C / WL1 57 °C
Load: 0.09, 0.16, 0.08
Uptime 2.5h
Errors: No, not at this moment.
WAN: DHCP
MTU:1500 Auto
Shortcut Forwarding Engine: CTF
Flow Acceleration: CTF & FA
STP: Disable
DHCP Server Enabled - Running
Samba Disabled
WRT-radauth Disabled
WRT-rflow Disabled
MAC-upd Disabled
CIFS Automount Disabled
Sputnik Agent Disabled
USB Support Disabled
I just encountered a new setting page but surely not supposed to be available Sysctl.asp with numerous parameters which surely crash the rtr if changed by newcomers! _________________ Netgear R3700 R8000 Asus AC68 AC5300 AX11000
Joined: 08 May 2018 Posts: 14244 Location: Texas, USA
Posted: Mon Jul 19, 2021 18:15 Post subject:
ddwrtfollower wrote:
I just encountered a new setting page but surely not supposed to be available Sysctl.asp with numerous parameters which surely crash the rtr if changed by newcomers!
It's been there for some time. I don't remember exactly since which build.
@mwchang: The only problem with manually setting parameters is if you ever do a reset in the future without doing an nvram erase, those changes are permanent, if I am not mistaken. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net