Posted: Mon Jun 28, 2021 10:05 Post subject: New Build - 06/28/2021 - r47000
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r47000 std (06/28/21)
Kernel: Linux 4.4.273 #3542 SMP Mon Jun 28 09:28:51 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound
Reset: No, not this time
Previous : r46979
Upgrade: Web and 1st succeed without reset.
Temperatures CPU 79.7 °C / WL1 57.5 °C
Load: 0.11, 0.05, 0.00
Uptime 2h45m
Errors: No, not at this moment.
WAN: DHCP
MTU:1500 Auto
Shortcut Forwarding Engine: CTF
Flow Acceleration: CTF & FA
STP: Disable
DHCP Server Enabled - Running
Samba Disabled
WRT-radauth Disabled
WRT-rflow Disabled
MAC-upd Disabled
CIFS Automount Disabled
Sputnik Agent Disabled
USB Support Disabled
Router/Version: Asus RT-N66U
File: dd-wrt.v24-47000_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r47000 big (06/28/21) (will go back to DD-WRT v3.0-r46949 big (06/13/21))
Kernel: forgot to take notes
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Active IP Connections on STATUS Router states "0" even when connected with Webif and SSH.
BUT it does receive time and date ~1 minute after boot.
Wireguard Endpoint does not connect, tunnel does not establish.
Cannot ping, mtr, anything through SSH.
Ifconfig looks same like working version r46949.
Went back to r46949, Problems gone. Reflashed r47000 --> problems appeared again.
Wireguard Settings uploaded to https://i.imgur.com/xsqMQpm.jpg
(I changed /32 to /24 for testing purposes, but to no avail).
Same problem as r46979, r46958.
Let me know if further information is needed, will provide as much as possible, including serial output.
Joined: 08 May 2018 Posts: 14221 Location: Texas, USA
Posted: Mon Jun 28, 2021 16:43 Post subject: Re: New Build - 06/28/2021 - r47000
We cannot report anything via email if there are no logs, especially serial console logs.
This is what BrainSlayer is going to ask for, and why it is included in the OP. Friendly reminder.
blkt wrote:
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Posted: Mon Jun 28, 2021 17:39 Post subject: Re: New Build - 06/28/2021 - r47000
kernel-panic69 wrote:
We cannot report anything via email if there are no logs, especially serial console logs.
This is what BrainSlayer is going to ask for, and why it is included in the OP. Friendly reminder.
You are right, took logs as requested
Please find attached r46949.txt and r47000.txt. Last working release for this N66U and newest release
Both files were taken using serial connection and start at boot.
After boot was completed I logged in and issued:
dmesg
cat /tmp/log/messages
iptables -vnL
iptables -t nat -vnL
iptables -t mangle -vnL
cat /tmp/.ipt
I'm eager to help solving this issue, so any advice or request --> I'll provide or check/test as fast as possible.
/edited to add description for logfiles and also correct revision number.
Posted: Tue Jun 29, 2021 7:28 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r47000 std (06/28/21) Kernel: Linux 4.4.273 #3542 SMP Mon Jun 28 09:28:51 +07 2021 armv7l Mode: Gateway, Wireless AP, Static Leases. CTF & FA Enabled. NAT and QOS Off. Reset: Nope. Previous: 06-21-2021-r46979 Status: Working really well so far, still testing. Temperatures: CPU 65.8 °C / WL0 50.5 °C / WL1 55.5 °C
Speedtest-3.jpg
Description:
Speedtest Over 5.8GHz
Filesize:
57.89 KB
Viewed:
6615 Time(s)
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
Joined: 26 Mar 2013 Posts: 1857 Location: Hung Hom, Hong Kong
Posted: Tue Jun 29, 2021 12:59 Post subject: DD-WRT BS build 47000 and Asus RT-N18U
Router/Version:Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r47000 std (06/28/21)
Kernel: Linux 4.4.273 #3546 Mon Jun 28 09:52:30 +07 2021 armv7l
Previous: DD-WRT v3.0-r46979 std (06/21/21)
Mode: WAN @ DHCP, Wireless @ AP
Status: Working (Not 24/7; Not using IPv6, VAP, VPN; Using NAS & USB; Unbound enabled; Not using CTF)
Reset: NO reset during firmware upgrade but cold boot
File:https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2021/06-28-2021-r47000/asus-rt-n18u/asus_rt-n18u-firmware.trx
Firmware Size
From 30515200 (b.31277) to 24711168 (b.33555) = -5804032 bytes
From 24711168 (b.33555) to 27054080 (b.34929) = 2342912 bytes
From 27054080 (b.34929) to 26640384 (b.35531) = -413696 bytes
From 26640384 (b.35531) to 25022464 (b.36995) = -1617920 bytes
From 25022464 (b.36995) to 25427968 (b.37961) = 405504 bytes
From 25427968 (b.37961) to 25804800 (b.38570) = 376832 bytes
From 25804800 (b.38570) to 27574272 (b.38840) = 1769472 bytes
From 27574272 (b.38840) to 27774976 (b.39031) = 200704 bytes
From 27774976 (b.39031) to 27779072 (b.39137) = 4096 bytes
From 27779072 (b.39137) to 27779072 (b.39144) = 0 byte
.... more ...
From 26341376 (b.43217) to 26472448 (b.43334) = 131072 bytes
From 26472448 (b.43334) to 26267648 (b.43381) = -204800 bytes
From 26267648 (b.43381) to 26279936 (b.43471) = 12288 bytes
From 26279936 (b.43471) to 26279936 (b.43718) = 0 bytes
From 26279936 (b.43718) to 26341376 (b.44085) = 61440 bytes
From 26341376 (b.44085) to 26382336 (b.44251) = 40960 bytes
From 26382336 (b.44251) to 26714112 (b.44700) = 331776 bytes
From 26714112 (b.44700) to 25522176 (b.44863) = -1191936 bytes
From 25522176 (b.44863) to 25522176 (b.44970) = 0 bytes
From 25522176 (b.44970) to 25518080 (b.45000) = -4096 bytes
From 25518080 (b.45000) to 25706496 (b.45592) = 188416 bytes
From 25706496 (b.45592) to 25870336 (b.46733) = 163840 bytes
From 25870336 (b.46733) to 25153536 (b.46733) = -716800 bytes
From 25153536 (b.46733) to 25145344 (b.47000) = -8192 bytes
Update:
It seemed that kernel-mode Samba was not working. I think it needed a cold start. Report back later...
Update 2:
Samba was not responding! Restarting Samba didn't help. Accessing the share directly by name didn't work. Again, MiniDLNA was working fine with the same USB drive storing Samba shares.
I tried listing iptables rules for ports 137-139, no match found!
And it seemed that a few iptables rules were being added and removed continuously.
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Joined: 08 May 2018 Posts: 14221 Location: Texas, USA
Posted: Tue Jun 29, 2021 15:38 Post subject:
Router/Version: Netgear R7000P
Firmware: DD-WRT v3.0-r47000 std (06/28/21)
Kernel: Linux 4.4.273 #3548 SMP Mon Jun 28 10:05:23 +07 2021 armv7l
Previous: DD-WRT v3.0-r46750 std (05/25/21)
Reset: No
Mode: 2.4 Wireless Client, 5GHz AP, Gateway
Status: OK
Uptime: ~24hrs
Temps: CPU 55.2 °C / WL0 43.8 °C / WL1 48.3 °C
Issues/Errors: _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Router/Version: Asus RT-N66R
File: dd-wrt.v24-47000_NEWD-2_K3.x-big-RT-N66U.trx
Kernel: Linux 4.4.273 #10429 Mon Jun 28 10:44:31 +07 2021 mips
Previous: dd-wrt.v24-46723_NEWD-2_K3.x-big-RT-N66U.trx
Reset: Yes, via 'nvram erase && reboot' before and after update, and then manually reconfigured router setup from scratch.
Mode: Gateway Router (with WiFi disabled; separate AP connected via LAN) [No Wireguard functions like Zyxx's setup.]
Status: No Internet connection, even though all hardwired and wireless clients appear to be connected accordingly per static IP assignments. Had to revert back to previously installed DD-WRT firmware, r46723, to restore Internet connection to all the clients. WAN connection seems normal according to its obtained IP and DNS servers from the ISP. Error log not available.
Uptime: 1 hrs
Temperatures: Not available [WiFi disabled]
Firmware: v3.0-r47000 std (06/28/21)
Router/Version: Netgear R7000 Kernel: Linux 4.4.273 #3542 SMP Mon Jun 28 09:28:51 +07 2021 armv7l
Previous: v3.0-r46979 std (06/21/21)
Mode/Status: AP wired and wireless / Up and running for 1 1/2 days
Reset: Soft boot before and after upgrade
Temperatures: CPU 58.6 °C / WL0 45.5 °C / WL1 50.5 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec. Nothing unexpected in the syslog.
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Joined: 18 Mar 2014 Posts: 12884 Location: Netherlands
Posted: Thu Jul 01, 2021 15:28 Post subject:
Router Model: Linksys EA6900 (XVortex CFE)
Firmware Version: DD-WRT v3.0-r47000 std (06/28/21)
Kernel Version: Linux 4.4.273 #3542 SMP Mon Jun 28 09:28:51 +07 2021 armv7l
Upgraded: DD-WRT v3.0-r44048 std (08/02/20) via telnet (update via GUI not possible because nvram is placed on linux partition and not linux2 partition due to Xvortex CFE)
Reset: Yes, nvram erase and WPS reset
Configuration: AP, DHCP server, 2,4GHz wireless running, 5GHz running, some static leases and some port range forwarding, SFE on, NVRAM size just over 32K (NVRAM size should not be a problem with the Xvortex CFE)
Status: Up and stable for 3 days, excellent wireless speed and range
Errors: none so far
Router/Version: R7000/v3.0-r47000 std
File/Kernel: netgear-r7000-webflash.bin / Linux 4.4.273 #3542 SMP Mon Jun 28 09:28:51 +07 2021 armv7l
Previous/Reset: r46446 / No
Mode/Status: Gateway / Working fine
Issues/Errors:
With last couple of builds when flashing to newer version, my download speed went down from 600Mbps to around 300/350 Mbps
Little did i know that only by changing "Shortcut Forwarding Engine" from SFE to CTF solved this problem.
Speed is even better now.