Joined: 08 May 2018 Posts: 14126 Location: Texas, USA
Posted: Tue Jun 22, 2021 19:39 Post subject:
Why are you using mixed authentication configurations? WPA2 personal with AES should be what you are using. Also no idea why you are still on a build from last year, you should consider upgrading.
Posted: Wed Jun 23, 2021 4:15 Post subject: authentication error
there is no restriction of clients..
Thanks for the update Link. My Router is now on DD-WRT v3.0-r46979 std (06/21/21) with WPA2 Personal and AES only.
I will test again later today and report it here.
Posted: Wed Jun 23, 2021 9:36 Post subject: authentication error
I have testet neighbors mobile and the authentication error still happens .. I have removed the wifi profile on the phone and reentered password. No luck.
I have set security to WPA Personal+AES and the connection was stable for 2 hours. Now the mobile has auth error on WPA, too.
Posted: Wed Jun 23, 2021 15:30 Post subject: authentication error
Here my 2.4GHz Wireless settings. I think there's nothing wrong ?
WLAN Mode : AP , NG Mixed on channel 13+9 on one antenna=150Mbit
Advanced Settings:
TX Power 18 dBm
Antenna Gain 0 dBi
LDPC Enabled
U-APSD (Automatic Power Save) Disabled
Disassoc Low Ack Disabled
Protection Mode None
RTS Threshold Disabled
Short Preamble Disabled
Short GI Enabled
AP Isolation Disabled
Beacon Interval 100
DTIM Interval 2
WMM Support Enabled
Radar Detection Disabled
ScanList default
Sensitivity Range (ACK Timing) 1350
Max Associated Clients 256 (Default: 256 Clients)
Minimum Signal for authenticate -128
Minimum Signal for connection -128
Poll Time for signal lookup 120
Amount of allowed low signals 60
Other settings
Allow Channel Overlapping Disable
Multicast nach Unicast Disabled
Network Konfiguration bridged
Posted: Sat Jun 26, 2021 11:16 Post subject: low signal check inerval
Hello,
I have changed long ago the clients with low signal check inerval to 120.
Now I want to set it back to the default value that I cannot find in the wiki.
Whats a good value ?
edit: Now I have found it in the wiki. X Count of Strikes he is Out. solved..