Posted: Fri Jun 18, 2021 11:50 Post subject: New Build - 06/18/2021 - r46974
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r46974 std (06/18/21) (prev. DD-WRT v3.0-r46958 std (06/16/21))
Kernel: Linux 4.4.272 #3481 SMP Thu Jun 17 14:46:47 +07 2021 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: Ok, up 0:27h.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-46974 NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r46974 big (06/18/21) (will go back to DD-WRT v3.0-r46949 big (06/13/21))
Kernel: Linux 4.4.272 #10273 Fri Jun 18 04:20:27 +07 2021 mips
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Wireguard Endpoint does not connect, tunnel does not establish. Active IP Connections on STATUS Router states "0" even when connected with Webif and SSH.
Went back to r46949, Problems gone. Reflashed 46958 --> problems appeared again.
See attached var/log/messages, let me know if anything can be done to further debug this
Settings uploaded to https://i.imgur.com/xsqMQpm.jpg
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r46974 std (06/18/21)
Kernel: Linux 4.4.272 #3481 SMP Thu Jun 17 14:46:47 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound
Reset: No, not this time
Previous : r46958
Upgrade: Web and 1st succeed without reset.
Temperatures CPU 76.9 °C / WL1 56.5 °C
Load: 0.11, 0.06, 0.01
Uptime 1h
Errors: No, not at this moment.
WAN: DHCP
MTU:1500 Auto
Shortcut Forwarding Engine: CTF
Flow Acceleration: CTF & FA
STP: Disable
DHCP Server Enabled - Running
Samba Disabled
WRT-radauth Disabled
WRT-rflow Disabled
MAC-upd Disabled
CIFS Automount Disabled
Sputnik Agent Disabled
USB Support Disabled
@egc, I tried this during my debugging session, to no avail even generated new keys... no success.
Additional tried "ip link set down oet1" (the command from your guide, maybe I missremeber it currently on mobile).
Can connect to my other router from mobile network via wireguard.
My VPS (Endpoint for the N66u) is up-to-date (ubuntu 20.04, Kernel 5.4), restartet WG on it, but no chance :/
Router/Version: RT-AC66U/Asus RT-AC66U
File DD-WRT v3.0-r46974 giga (06/18/21)
Kernel: Previous/Reset: 46949/no
Mode/Status: access point, MAC filter/not working
Issues/Errors: not booting up after upgrade. Needed to restore 46949 via ASUS mini webserver. Configuration was reset to defaults. I definitely started less 5 times. Configuration was now redone from scratch but the difference to my former nvram variable backup is minimal. _________________ Asus AC-RT88U (Gateway, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT88U (AP, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT68U (AP, asus_rt-ac68u-firmware_52459.trx)
Asus AC-RT66U (AP, dd-wrt-52459-Asus_RT-AC66U.trx)
Linksys E3000 (AP, dd-wrt.v24-52459_NEWD-2_K3.x_mega-e3000.bin)
Linksys E4200 V2 (openwrt-18.06.5-kirkwood-linksys_viper-squashfs-sysupgrade.bin) not used at the moment
Joined: 18 Mar 2014 Posts: 12875 Location: Netherlands
Posted: Fri Jun 18, 2021 16:54 Post subject:
Zyxx wrote:
@egc, I tried this during my debugging session, to no avail even generated new keys... no success.
Additional tried "ip link set down oet1" (the command from your guide, maybe I missremeber it currently on mobile).
Can connect to my other router from mobile network via wireguard.
My VPS (Endpoint for the N66u) is up-to-date (ubuntu 20.04, Kernel 5.4), restartet WG on it, but no chance :/
The symptoms you describe is because the client cannot connect to the server. the client is up but gets no response form the server.
So could be a network problem or a key problem indeed.
Our WG implementation (setup and routing etc) did not change it is only the core WG files which have been updated.
As you have setup on a WAP check if this rule is still present and working on the WAP:
iptables -t nat -I POSTROUTING -o br0 -j SNAT --to $(nvram get lan_ipaddr)
I saw your IPaddress/Netmask is /32 which actually should work as you also have 0.0.0.0/1,128.0.0.0/1 in allowed IPs and route Allowed IP's but I recommend using /24 for Netmask as a safety measure as the interface will automatically make a route for the tunnel when using /24
Joined: 18 Mar 2014 Posts: 12875 Location: Netherlands
Posted: Fri Jun 18, 2021 17:37 Post subject:
Router Model: Netgear R6400v2, board_id: U12H332T
Firmware Version: DD-WRT v3.0-r46974 std (06/18/21)
Kernel Version: Linux 4.4.272 #3481 SMP Thu Jun 17 14:46:47 +07 2021 armv7l
Upgraded from: DD-WRT v3.0-r46949M Community Build (06/13/21)
Reset: No not this time
Status: Up and running for 2 hours, basic setup as Gateway, static leases, OpenVPN client with Policy Based Routing up and running, 2,4GHz and 5Ghz working, USB storage NAS working, OpenVPN server working, WireGuard server working with 8 clients (phones , windows and two other routers for site-to-site setup).
Posted: Sat Jun 19, 2021 3:38 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r46974 std (06/18/21) Kernel: Linux 4.4.272 #3481 SMP Thu Jun 17 14:46:47 +07 2021 armv7l Mode: Gateway, Wireless AP. CTF & FA Enabled. NAT and QOS Off. Reset: Nope. Previous: 06-16-2021-r46958 Status: Working really well so far, CPU hot but it's hot here so... still testing. Temperatures: CPU 66.9 °C / WL0 51.0 °C / WL1 56.0 °C
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
Joined: 16 Nov 2015 Posts: 6435 Location: UK, London, just across the river..
Posted: Sat Jun 19, 2021 6:40 Post subject:
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r46974 std (06/18/21)
Kernel Version Linux 4.4.272 #3481 SMP Thu Jun 17 14:46:47 +07 2021 armv7l
interface br1 is added twice...i dont have any rules regarding it in dnsmasq adv config or start up script...
I have vlan 3 added via GUI and its assigned to br1 and has DHCPd on br1...net isolation is turned on...has its own subnet/nat and using default DNS... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55779 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Firmware: v3.0-r46974 std (06/18/21)
Router/Version: Netgear R7000 Kernel: Linux 4.4.272 #3481 SMP Thu Jun 17 14:46:47 +07 2021 armv7l
Previous: v3.0-r46949 std (06/13/21)
Mode/Status: AP wired and wireless / Up and running for 24 hours
Reset: Soft boot before and after upgrade
Temperatures: CPU 61.4 °C / WL0 46.8 °C / WL1 52.0 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec. Nothing unexpected in the syslog.
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Router/Version: Netgear R6400v1
File/Kernel: DD-WRT v3.0-r46974 std (06/18/21) / Linux 4.4.272 #3481 SMP armv7l
Previous/Reset: r46949 / no
Mode/Status: Gateway / up 4.5 hours without issue
Issues/Errors: None so far