New Build - 06/18/2021 - r46974

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Fri Jun 18, 2021 11:49    Post subject: New Build - 06/18/2021 - r46974 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r46958 (GitHub mirror)

Notes:
OpenVPN 2.5.2: Guides, Server, PBR, Reverse PBR, Client (see second post), Kill Switch, update tips, scripts and more.
WireGuard 1.0.20210606/Tools: Guides, Client, Server, Advanced, PBR, KS, update tips, scripts & more. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
Select ath10k radios now feature on-the-fly firmware type switching between Customized DD-WRT and Vanilla QCA binaries!
SmartDNSMiniDLNA • Unbound 1.13.1 • CoovaChilli 1.6 • Tor 0.4.5.8 • OpenSSL 1.1.1k • Dnsmasq 2.85 • Privoxy 3.0.32
In-kernel Samba (ksmbd 3.3.9+): default min/max versions changed. • WSD updateANTFS/NTFS3 kernel mode driver++.
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 (Fragattack) fixed.
• "Assign WAN port to Switch" feature removed to be reworked in a future release.

Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Fri Jun 18, 2021 12:43    Post subject: Reply with quote
Update method: SSH / CLI
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r46974 std (06/18/21)
Previous/Reset: DD-WRT v3.0-r46958 std (06/16/21) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: None

Thank you, BrainSlayer!

_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
Zyxx
DD-WRT Guru


Joined: 28 Dec 2018
Posts: 732

PostPosted: Fri Jun 18, 2021 13:13    Post subject: Reply with quote
Router/Version: Netgear R7800
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r46974 std (06/18/21) (prev. DD-WRT v3.0-r46958 std (06/16/21))
Kernel: Linux 4.9.272 #287 SMP Fri Jun 18 01:45:33 +07 2021 armv7l
Mode: Gateway, 2.4G and 5G wifi, 1VAP @2.4G with different SSID, Wireguard for external access, WAN to 4G, Keep Alive reboot 6:02 in the morning
Reset: No
Status: Ok, up 0:17h.
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Fri Jun 18, 2021 13:20    Post subject: Reply with quote
Router Model: dir-862L(x2), x86_64(2x qca9984 ,1x qca9882)

Status: it runs
Reset: no
Errors: see tickets below

https://svn.dd-wrt.com/ticket/5225 *
https://svn.dd-wrt.com/ticket/5603 *
https://svn.dd-wrt.com/ticket/5848
https://svn.dd-wrt.com/ticket/5938
https://svn.dd-wrt.com/ticket/6286
https://svn.dd-wrt.com/ticket/6315
https://svn.dd-wrt.com/ticket/6481 *
https://svn.dd-wrt.com/ticket/6495 *
https://svn.dd-wrt.com/ticket/6655
https://svn.dd-wrt.com/ticket/6842
https://svn.dd-wrt.com/ticket/6903 *
https://svn.dd-wrt.com/ticket/6921
https://svn.dd-wrt.com/ticket/7154
https://svn.dd-wrt.com/ticket/7222 *
https://svn.dd-wrt.com/ticket/7226
https://svn.dd-wrt.com/ticket/7246
https://svn.dd-wrt.com/ticket/7284
https://svn.dd-wrt.com/ticket/7331
https://svn.dd-wrt.com/ticket/7338
https://svn.dd-wrt.com/ticket/7432


ath10k_pci 0000:08:00.0: consec fail!!
ath10k_pci 0000:08:00.0: consec fail!!
ath10k_pci 0000:08:00.0: rx hang (>2))

everywhere with qca988x.. (ddwrt firmware, thought vanilla was doing it too but its not, and vanilla has proper tx/rx rates)

and i bet it was that on https://svn.dd-wrt.com/changeset/46968 cause it started on that very build... (and so did bullshit tx/rx rates). i wonder what "disable ps" was.. wasnt uapsd as we still dont have that so... what powersave.. and why not users choose this.

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..



Last edited by tatsuya46 on Fri Jun 18, 2021 22:49; edited 1 time in total
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 2028

PostPosted: Fri Jun 18, 2021 20:22    Post subject: Reply with quote
Netgear R7500v2
DD-WRT v3.0-r46974 std (06/18/21)
Linux 4.9.272 #286 SMP Fri Jun 18 01:34:58 +07 2021 armv7l

CLI upgrade no reset over r46958
wlan0 WDS Sta and all services working fine
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6408
Location: UK, London, just across the river..

PostPosted: Sat Jun 19, 2021 6:35    Post subject: Reply with quote
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r46974 std (06/18/21)
Kernel Version Linux 4.9.272 #287 SMP Fri Jun 18 01:45:33 +07 2021 armv7l

update: CLI r46949 > r46974
reset: NO
status: Operational 12h+
errors: cat /tmp/dnsmasq.conf > interface=br0,br1,br2,br1,br2
br1, br2 added twice..?? i dont have any commands in advanced DNSmasq regarding it only start up script
swconfig dev switch0 set enable_vlan 1
swconfig dev switch0 vlan 1 set ports "1 2 6"
swconfig dev switch0 vlan 11 set ports "3 6t"
swconfig dev switch0 vlan 21 set ports "4 6t"
swconfig dev switch0 set apply
vconfig add eth1 11
vconfig add eth1 21
brctl addif br1 eth1.11
brctl addif br2 eth1.21
ifconfig eth1.11 192.168.128.1 netmask 255.255.255.0
ifconfig eth1.21 192.168.129.1 netmask 255.255.255.0
ifconfig eth1.11 up
ifconfig eth1.21 up

router is working as it should...10x BS

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Sat Jun 19, 2021 13:31    Post subject: Reply with quote
Does the webUI configs reflect your intended configuration? There is a chance that you no longer need the startup script as the goal was to use the webUI across the board, not just on Broadcom, if I am not mistaken.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Sat Jun 19, 2021 14:32    Post subject: Reply with quote
Up 25 hours, no issues, no hiccups.
_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6408
Location: UK, London, just across the river..

PostPosted: Sat Jun 19, 2021 15:12    Post subject: Reply with quote
kernel-panic69 wrote:
Does the webUI configs reflect your intended configuration? There is a chance that you no longer need the startup script as the goal was to use the webUI across the board, not just on Broadcom, if I am not mistaken.


on R7800 i have vlan's via start up, while on Broadcom R7000 i use GUI..both contain the same error in dnsmasq.conf multiple 'br'

i haven't tried R7800 GUI vlan config yet, it was working in the past...

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12836
Location: Netherlands

PostPosted: Sat Jun 19, 2021 15:56    Post subject: Reply with quote
There has been a commit not long ago where BS set all interfaces to listen to DNSMasq (normally it was only br0 and the interface you made such as br1 etc, those where added when you made them so now they are double.

will see if I can find it

The commit was ment for vpn and wg interfaces so that DNSMasq would automatically listen on those interfaces, this seems an unwanted side effect

Will look into it Smile

This commit:
https://svn.dd-wrt.com/changeset/45978

and this is where the solution might come from:
https://svn.dd-wrt.com/changeset/45980

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Wildlion
DD-WRT Guru


Joined: 24 May 2016
Posts: 1407

PostPosted: Sat Jun 19, 2021 20:18    Post subject: Reply with quote
Router: TL-WDR3600 v1
Firmware: tl-wdr3600_us-webflash.bin (v3.0-r46974 std)
Kernel: Linux 3.10.108-d11 #84069 Fri Jun 18 04:14:23 +07 2021 mips
Status: working
Reset: No
Notes on configuration:

    Client

Errors:


    1. 5Ghz wireless light is not on (2.4Ghz light works)

DWCruiser
DD-WRT User


Joined: 15 Aug 2016
Posts: 223
Location: Melbourne, Australia

PostPosted: Wed Jun 23, 2021 0:11    Post subject: Reply with quote
Alozaros wrote:

...
errors: cat /tmp/dnsmasq.conf > interface=br0,br1,br2,br1,br2
br1, br2 added twice..?? i dont have any commands in advanced DNSmasq regarding it only start up script
....
brctl addif br1 eth1.11
brctl addif br2 eth1.21

ifconfig eth1.11 192.168.128.1 netmask 255.255.255.0
ifconfig eth1.21 192.168.129.1 netmask 255.255.255.0

....
router is working as it should...10x BS


If I am not wrong, the commands in bold above (my emphasis) place eth1.11 and eth1.21 on br1 and br2. As a result, eth1.11 and eth1.21 take on the IPs, respectively, of the bridges themselves.

The bridges, in turn, are manually assigned specific IP addresses under Setup/Networking tab in this case.

The commands in italic (again, my emphasis) therefore become redundant.

P.S. This redundancy can be easily proven by assigning, say, 192.168.111.1 to br1, and 192.168.121.1 to br2.

And eth1.11 and eth1.21 will carry the third octets of 111 and 121 instead. Even if the two italic commands are left in.

Cheers.

(Edited for clarity).
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Wed Jun 23, 2021 3:52    Post subject: Reply with quote
Netgear WNDR3700 V4
DD-WRT v3.0-r46974 std (06/18/21)
Linux 3.18.140-d6 #119007 Fri Jun 18 06:09:57 +07 2021 mips
GUI install over r46885
switch / OVPN server / samba share ext4
everything all good
surprised this old things ovpn server still works really good ---
--- not nearly as fast as the EA8500 ...but plenty good for me iffin I ever need it Cool

#

Linksys EA8500
DD-WRT v3.0-r46974 std (06/18/21)
Linux 4.9.272 #285 SMP Fri Jun 18 01:25:13 +07 2021 armv7l
GUI install over r46885
switch / OVPN server / samba share ext4 / VLAN on 2 ports
tis all worky very well

#

still running r46885 on main EA8500 up 17 days, 16:28 without a problem
AND r46885 was released on my B-Day ...so there is that also Razz
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum