Posted: Mon Jun 14, 2021 21:01 Post subject: noob question , from modem built in router to dd-wrt router
hello brothers
ive just got a router with dd-wrt on it , and im trying to make it my main network distribution ,
im trying to make my modem in bridge mode and connected to dd-wrt router , but no luck , if im using DMZ its all fine but in bridge mode i cant get it to work , can any one help out and give me some tips on what to doo,
Joined: 08 May 2018 Posts: 14126 Location: Texas, USA
Posted: Mon Jun 14, 2021 21:30 Post subject:
Please include all applicable information; ISP modem / router combo model, DD-WRT router model and DD-WRT firmware revision number so this can be transferred to the proper forum. Also, please familiarize yourself with the forum rules and guidelines.
hello ,
oh im sorry i should have read the rules first
my modem/router is tp-link TD-W8960N V7
and the router with dd-wrt is Linksys E900 / Firmware: DD-WRT v3.0-r44715 mega
, thank you and sorry again for not reading the rules first
Of course, I am wondering if you need to set the LAN IP of your E900 to 192.168.2.1 in the basic networking setup config since the TP-Link is 192.168.1.1. Plenty of links to read about setting up bridge mode, though. You will want to consider upgrading the E900 firmware at some point, but you will need to check the build release threads here in the Broadcom forum. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net