Posted: Sun Jun 13, 2021 7:19 Post subject: New Build - 06/13/2021 - r46949 [DELETED]
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Joined: 13 Aug 2013 Posts: 6866 Location: Romerike, Norway
Posted: Sun Jun 13, 2021 8:28 Post subject:
Router Model: Asus RT-AC66U
Firmware Version:DD-WRT v3.0-r46949 giga (06/13/21)
Kernel Version: Linux 4.4.272 #10063 Sun Jun 13 06:04:29 +07 2021 mips
Method: Web update from 46885
Status: Working
Joined: 18 Mar 2014 Posts: 12882 Location: Netherlands
Posted: Sun Jun 13, 2021 9:49 Post subject:
Router Model: Netgear R6400v1
Firmware Version: DD-WRT v3.0-r46949M Community Build (06/13/21)
Kernel Version: Linux 4.4.272 #1 SMP Sun Jun 13 08:43:06 CEST 2021 armv7l
Upgraded from: DD-WRT v3.0-r46885M Community Build (06/04/21)
Reset: No not this time
Status: Up and running for 2 hours, basic setup as Gateway, static leases, Advanced routing, IPv4, 2.4 GHz and 5 GHz.
Running one WireGuard tunnel to Keepsolid and second WireGuard tunnel to own WG server for site-to-site connection. OpenVPN client with PBR tested and working
Errors: No
Most of the Broadcom K3 builds are missing? _________________ Asus AC-RT88U (Gateway, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT88U (AP, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT68U (AP, asus_rt-ac68u-firmware_52459.trx)
Asus AC-RT66U (AP, dd-wrt-52459-Asus_RT-AC66U.trx)
Linksys E3000 (AP, dd-wrt.v24-52459_NEWD-2_K3.x_mega-e3000.bin)
Linksys E4200 V2 (openwrt-18.06.5-kirkwood-linksys_viper-squashfs-sysupgrade.bin) not used at the moment
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r46949 std (06/13/21) (prev. DD-WRT v3.0-r46885 std (06/05/21))
Kernel: Linux 4.4.272 #3431 SMP Fri Jun 11 13:15:03 +07 2021 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: Ok, up 7:01h.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-46949 NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r46949 big (06/13/21) (prev. DD-WRT v3.0-r46885 big (06/05/21))
Kernel: Linux 4.4.272 #10075 Sun Jun 13 06:25:44 +07 2021 mips
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Ok, up 7:00h.
Last edited by Zyxx on Sun Jun 13, 2021 18:47; edited 1 time in total
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r46949 std (06/13/21)
Kernel: Linux 4.4.272 #3431 SMP Fri Jun 11 13:15:03 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound
Reset: No, not this time
Previous : r46885
Upgrade: Web and 1st succeed without reset.
Temperatures CPU 79.1 °C / WL1 56.9 °C
Load: 0.23, 0.10, 0.02
Uptime 3h15min
Errors: No, not at this moment.
WAN: DHCP
MTU:1500 Auto
Shortcut Forwarding Engine: CTF
Flow Acceleration: CTF & FA
STP: Disable
DHCP Server Enabled - Running
Samba Disabled
WRT-radauth Disabled
WRT-rflow Disabled
MAC-upd Disabled
CIFS Automount Disabled
Sputnik Agent Disabled
USB Support Disabled
Posted: Mon Jun 14, 2021 2:07 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r46949 std (06/13/21) Kernel: Linux 4.4.272 #3431 SMP Fri Jun 11 13:15:03 +07 2021 armv7l Mode: Gateway, Wireless AP. CTF & FA Enabled. NAT and QOS Off. Reset: Nope. Previous: 06-05-2021-r46885 Status: Working so far, still testing. High CPU temps. Poor throughput compared to 06-05-2021-r46885. Temperatures: CPU 67.5 °C / WL0 50.6 °C / WL1 55.9 °C
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
Router/Version: Netgear WNDR3400 Previous/Reset: r46239 Big K26 Issues/Errors: Bricked on both Mega and Big K26
I tested Mega, Big and the Factory-to-dd-wrt *.chk build. The Mega and Big versions bricked the router. The r46949 *.chk "mini" version did boot - however it DID NOT appear to support the ethernet ports as I only could access the router via wifi.
The previous version 46239 Big K26 runs fine on this router. Apparently the build size in the K26 Big version is too large now. And there is no Standard or nokaid version that is built with nv64k which is needed for this router.
Router/Version: Asus RT-AC88U/Asus RT-AC88U
File DD-WRT v3.0-r46949 std (06/13/21)
Kernel: Linux 4.4.272 #3436 SMP Sun Jun 13 06:15:26 +07 2021 armv7l
Gateway (new hardware 2020) Previous/Reset: 46854/no
Mode/Status: gateway, DDNS, Samba, DHCP static leases, MAC filter, port forwarding/running with issues
Issues/Errors: Lan ports (1-4) are still in reversed order.
Still losing the 2.4Ghz WIFI interface most of the time. Sometimes it shows up and is operational again. The router is restarting by itself every few hours. I also get the lookups i mentioned before for other builds. This is a brand new router and a hardware issues is not very likely since the old router behaved very much the same and is now working properly as an access point.
Access Point (old hardware 2017) Previous/Reset: 46854/no
Mode/Status: access point, MAC filter/running
Issues/Errors: Lan ports (1-4) are still in reversed order. The following commands will fix it but the the NVRAM values will not survive the reboot.
nvram set sw_lan4="0"
nvram set sw_lan3="1"
nvram set sw_lan2="2"
nvram set sw_lan1="3"
nvram commit
Both routers are configured from scratch with build 46788.
PS: Just checked last days and the random reboot of the gateway router also happens with the previous build (46885). The AP router is running multiple days without issues. There must be something in the configuration which causes the random reboots and the only random detection of the 2.4GHz WIFI interface of the gateway router.
dmesg.zip
Description:
dmesg1 WIFI Working dmesg2 2.4GHz WIFI not working
_________________ Asus AC-RT88U (Gateway, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT88U (AP, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT68U (AP, asus_rt-ac68u-firmware_52459.trx)
Asus AC-RT66U (AP, dd-wrt-52459-Asus_RT-AC66U.trx)
Linksys E3000 (AP, dd-wrt.v24-52459_NEWD-2_K3.x_mega-e3000.bin)
Linksys E4200 V2 (openwrt-18.06.5-kirkwood-linksys_viper-squashfs-sysupgrade.bin) not used at the moment
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Sat Jun 19, 2021 8:55 Post subject:
I don't know why this build is erased from server. That is last version bootable on low end routers: Netgear WNR3500Lv2 and cheap Asus devices can't start on build 6/16/2021 and newer. This build dosen't exist now and I must back to version from 6/10/2021.
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Sun Jun 20, 2021 17:57 Post subject:
thommy181 wrote:
I don't know why this build is erased from server. That is last version bootable on low end routers: Netgear WNR3500Lv2 and cheap Asus devices can't start on build 6/16/2021 and newer. This build dosen't exist now and I must back to version from 6/10/2021.
there is no reason. it was just a misstake by me while copying files and i did not fix it later since it was pointless. the netgear issue is fixed. asus routers do not have a problem with booting _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Sun Jun 20, 2021 18:00 Post subject: Re: Netgear Nighthawk R7000
twindragon6 wrote:
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r46949 std (06/13/21) Kernel: Linux 4.4.272 #3431 SMP Fri Jun 11 13:15:03 +07 2021 armv7l Mode: Gateway, Wireless AP. CTF & FA Enabled. NAT and QOS Off. Reset: Nope. Previous: 06-05-2021-r46885 Status: Working so far, still testing. High CPU temps. Poor throughput compared to 06-05-2021-r46885. Temperatures: CPU 67.5 °C / WL0 50.6 °C / WL1 55.9 °C
if i contantly see messages about high cpu temp i will remove the temperature sensor from gui. i'm not sitting in your router and heating it up. broadcom builds that hot cpu and these temperatures are absolutelly normal and it was always like that. these values are for informational use and not for reporting or commenting it _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s