New Build - 06/13/2021 - r46949 [DELETED]

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 2995

PostPosted: Sun Jun 13, 2021 7:19    Post subject: New Build - 06/13/2021 - r46949 [DELETED] Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r46885 (GitHub mirror)

Notes:
OpenVPN 2.5.2: Guides, Server, PBR, Reverse PBR, Client (see second post), Kill Switch, update tips, scripts and more.
WireGuard 1.0.20210219/Tools: Guides, Client, Server, Advanced, PBR, KS, update tips, scripts & more. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• Broadcom MIPS devices are now on kernel 4.4. • Support added for TP-Link Archer C8 v2 and v3.
SmartDNSMiniDLNA • Unbound 1.13.1 • CoovaChilli 1.6 • Tor 0.4.5.8 • OpenSSL 1.1.1k • Dnsmasq 2.85 • Privoxy 3.0.32
In-kernel Samba (ksmbd 3.3.9+): default min/max versions changed. • WSD updateANTFS/NTFS3 kernel mode driver++.
• Added swconfig support for Broadcom devices.
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 (Fragattack) fixed.
• "Assign WAN port to Switch" feature removed to be reworked in a future release.

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs in 40562 - 40566. Effective startup commands discussion thread is here.
If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
Show us your findings with steps to reproduce, configuration, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 6171
Location: Romerike, Norway

PostPosted: Sun Jun 13, 2021 8:28    Post subject: Reply with quote
Router Model: Asus RT-AC66U
Firmware Version:DD-WRT v3.0-r46949 giga (06/13/21)
Kernel Version: Linux 4.4.272 #10063 Sun Jun 13 06:04:29 +07 2021 mips
Method: Web update from 46885
Status: Working
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 7924
Location: Netherlands

PostPosted: Sun Jun 13, 2021 9:49    Post subject: Reply with quote
Router Model: Netgear R6400v1

Firmware Version: DD-WRT v3.0-r46949M Community Build (06/13/21)
Kernel Version: Linux 4.4.272 #1 SMP Sun Jun 13 08:43:06 CEST 2021 armv7l

Upgraded from: DD-WRT v3.0-r46885M Community Build (06/04/21)
Reset: No not this time

Status: Up and running for 2 hours, basic setup as Gateway, static leases, Advanced routing, IPv4, 2.4 GHz and 5 GHz.
Running one WireGuard tunnel to Keepsolid and second WireGuard tunnel to own WG server for site-to-site connection. OpenVPN client with PBR tested and working
Errors: No

Big Thanks to BS and other forum members and developers.

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
WireGuard Documents & Guides:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327397
OpenVPN Documents & Guides: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327398
IPSET: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327261
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
mj666
DD-WRT Novice


Joined: 26 Nov 2010
Posts: 37

PostPosted: Sun Jun 13, 2021 10:34    Post subject: Reply with quote
Most of the Broadcom K3 builds are missing?
_________________
Asus AC-RT88U (Gateway, asus_rt-ac88u-firmware_47090.trx)
Asus AC-RT88U (AP, asus_rt-ac88u-firmware_47090.trx)
Asus AC-RT68U (AP, asus_rt-ac68u-firmware_47090.trx)
Asus AC-RT66U (AP, dd-wrt-46949-Asus_RT-AC66U.trx)
Linksys E3000 (AP, dd-wrt.v24-46885_NEWD-2_K3.x_mega-e3000.bin)
Linksys E4200 V2 (openwrt-18.06.5-kirkwood-linksys_viper-squashfs-sysupgrade.bin) not used at the moment
IONK
DD-WRT User


Joined: 19 Aug 2011
Posts: 276

PostPosted: Sun Jun 13, 2021 11:50    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.272 #3431 SMP Fri Jun 11 13:15:03 +07 2021 armv7l
Previous/Reset: DD-WRT v3.0-r46885 std (06/05/21) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + USB Storage + lighttpd + ProFTPD + Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases: https://politepol.com/fd/NfCoAP5bUJXU
easyddup - A simple upgrade/downgrade utility by yoyoma2
Zyxx
DD-WRT User


Joined: 28 Dec 2018
Posts: 421

PostPosted: Sun Jun 13, 2021 15:02    Post subject: Reply with quote
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r46949 std (06/13/21) (prev. DD-WRT v3.0-r46885 std (06/05/21))
Kernel: Linux 4.4.272 #3431 SMP Fri Jun 11 13:15:03 +07 2021 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: Ok, up 7:01h.

Router/Version: Asus RT-N66U
File: dd-wrt.v24-46949 NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r46949 big (06/13/21) (prev. DD-WRT v3.0-r46885 big (06/05/21))
Kernel: Linux 4.4.272 #10075 Sun Jun 13 06:25:44 +07 2021 mips
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Ok, up 7:00h.


Last edited by Zyxx on Sun Jun 13, 2021 18:47; edited 1 time in total
saphirely
DD-WRT User


Joined: 13 Dec 2020
Posts: 57

PostPosted: Sun Jun 13, 2021 17:46    Post subject: Reply with quote
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r46949 std (06/13/21)
Kernel: Linux 4.4.272 #3431 SMP Fri Jun 11 13:15:03 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound
Reset: No, not this time
Previous : r46885
Upgrade: Web and 1st succeed without reset.
Temperatures CPU 79.1 °C / WL1 56.9 °C
Load: 0.23, 0.10, 0.02
Uptime 3h15min
Errors: No, not at this moment.

WAN: DHCP
MTU:1500 Auto
Shortcut Forwarding Engine: CTF
Flow Acceleration: CTF & FA
STP: Disable

DHCP Server Enabled - Running
Samba Disabled
WRT-radauth Disabled
WRT-rflow Disabled
MAC-upd Disabled
CIFS Automount Disabled
Sputnik Agent Disabled
USB Support Disabled

Works well.
twindragon6
DD-WRT User


Joined: 29 Jun 2008
Posts: 200

PostPosted: Mon Jun 14, 2021 2:07    Post subject: Netgear Nighthawk R7000 Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r46949 std (06/13/21)
Kernel: Linux 4.4.272 #3431 SMP Fri Jun 11 13:15:03 +07 2021 armv7l
Mode: Gateway, Wireless AP. CTF & FA Enabled. NAT and QOS Off.
Reset: Nope.
Previous: 06-05-2021-r46885
Status: Working so far, still testing. High CPU temps. Poor throughput compared to 06-05-2021-r46885.
Temperatures: CPU 67.5 °C / WL0 50.6 °C / WL1 55.9 °C



Logs.txt
 Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!

nvram set console_debug=1

cat /var/log/messages (Initial Flash)
dmesg (Initial Flash)
cat /proc/cpuinfo
cat /tmp/dnsmasq.conf
cat /tmp/DNSCache.log
cat /tmp/unbound

Download
 Filename:  Logs.txt
 Filesize:  543.62 KB
 Downloaded:  32 Time(s)

tedm
DD-WRT User


Joined: 13 Mar 2009
Posts: 451

PostPosted: Mon Jun 14, 2021 5:26    Post subject: Reply with quote
Router/Version: Netgear WNDR3400
Previous/Reset: r46239 Big K26
Issues/Errors: Bricked on both Mega and Big K26

I tested Mega, Big and the Factory-to-dd-wrt *.chk build. The Mega and Big versions bricked the router. The r46949 *.chk "mini" version did boot - however it DID NOT appear to support the ethernet ports as I only could access the router via wifi.

The previous version 46239 Big K26 runs fine on this router. Apparently the build size in the K26 Big version is too large now. And there is no Standard or nokaid version that is built with nv64k which is needed for this router.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 9521
Location: Texas, USA

PostPosted: Mon Jun 14, 2021 5:45    Post subject: Reply with quote
These files bricked it? Doesn't look as if they are over 7995392 bytes in size per the wiki.

dd-wrt.v24-46949_NEWD-2_K2.6_big-nv64k.bin

dd-wrt.v24-46949_NEWD-2_K2.6_mega-nv64k.bin

It may be required to do a hard reset on your router post 46446 due to changes related to swconfig support being added.

_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
mj666
DD-WRT Novice


Joined: 26 Nov 2010
Posts: 37

PostPosted: Wed Jun 16, 2021 9:00    Post subject: Reply with quote
Router/Version: Asus RT-AC88U/Asus RT-AC88U
File DD-WRT v3.0-r46949 std (06/13/21)
Kernel: Linux 4.4.272 #3436 SMP Sun Jun 13 06:15:26 +07 2021 armv7l

Gateway (new hardware 2020)
Previous/Reset: 46854/no
Mode/Status: gateway, DDNS, Samba, DHCP static leases, MAC filter, port forwarding/running with issues
Issues/Errors: Lan ports (1-4) are still in reversed order.

Still losing the 2.4Ghz WIFI interface most of the time. Sometimes it shows up and is operational again. The router is restarting by itself every few hours. I also get the lookups i mentioned before for other builds. This is a brand new router and a hardware issues is not very likely since the old router behaved very much the same and is now working properly as an access point.

Access Point (old hardware 2017)
Previous/Reset: 46854/no
Mode/Status: access point, MAC filter/running
Issues/Errors: Lan ports (1-4) are still in reversed order. The following commands will fix it but the the NVRAM values will not survive the reboot.

nvram set sw_lan4="0"
nvram set sw_lan3="1"
nvram set sw_lan2="2"
nvram set sw_lan1="3"
nvram commit

Both routers are configured from scratch with build 46788.

PS: Just checked last days and the random reboot of the gateway router also happens with the previous build (46885). The AP router is running multiple days without issues. There must be something in the configuration which causes the random reboots and the only random detection of the 2.4GHz WIFI interface of the gateway router.



dmesg.zip
 Description:
dmesg1 WIFI Working
dmesg2 2.4GHz WIFI not working

Download
 Filename:  dmesg.zip
 Filesize:  17.55 KB
 Downloaded:  33 Time(s)


_________________
Asus AC-RT88U (Gateway, asus_rt-ac88u-firmware_47090.trx)
Asus AC-RT88U (AP, asus_rt-ac88u-firmware_47090.trx)
Asus AC-RT68U (AP, asus_rt-ac68u-firmware_47090.trx)
Asus AC-RT66U (AP, dd-wrt-46949-Asus_RT-AC66U.trx)
Linksys E3000 (AP, dd-wrt.v24-46885_NEWD-2_K3.x_mega-e3000.bin)
Linksys E4200 V2 (openwrt-18.06.5-kirkwood-linksys_viper-squashfs-sysupgrade.bin) not used at the moment
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 209
Location: Szczecin, Poland EU

PostPosted: Sat Jun 19, 2021 8:55    Post subject: Reply with quote
I don't know why this build is erased from server. That is last version bootable on low end routers: Netgear WNR3500Lv2 and cheap Asus devices can't start on build 6/16/2021 and newer. This build dosen't exist now and I must back to version from 6/10/2021.
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7174
Location: Dresden, Germany

PostPosted: Sun Jun 20, 2021 17:57    Post subject: Reply with quote
thommy181 wrote:
I don't know why this build is erased from server. That is last version bootable on low end routers: Netgear WNR3500Lv2 and cheap Asus devices can't start on build 6/16/2021 and newer. This build dosen't exist now and I must back to version from 6/10/2021.



there is no reason. it was just a misstake by me while copying files and i did not fix it later since it was pointless. the netgear issue is fixed. asus routers do not have a problem with booting

_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7174
Location: Dresden, Germany

PostPosted: Sun Jun 20, 2021 18:00    Post subject: Re: Netgear Nighthawk R7000 Reply with quote
twindragon6 wrote:
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r46949 std (06/13/21)
Kernel: Linux 4.4.272 #3431 SMP Fri Jun 11 13:15:03 +07 2021 armv7l
Mode: Gateway, Wireless AP. CTF & FA Enabled. NAT and QOS Off.
Reset: Nope.
Previous: 06-05-2021-r46885
Status: Working so far, still testing. High CPU temps. Poor throughput compared to 06-05-2021-r46885.
Temperatures: CPU 67.5 °C / WL0 50.6 °C / WL1 55.9 °C



if i contantly see messages about high cpu temp i will remove the temperature sensor from gui. i'm not sitting in your router and heating it up. broadcom builds that hot cpu and these temperatures are absolutelly normal and it was always like that. these values are for informational use and not for reporting or commenting it

_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Display posts from previous:    Page 1 of 1
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum