Posted: Sat Jun 05, 2021 5:07 Post subject: New Build - 06/05/2021 - r46885
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
EDIT: sometimes these lines appear in the log again
Code:
Jun 7 08:08:03 RB user.info : nas : daemon successfully stopped
Jun 7 08:08:05 RB user.info : nas : daemon hanging, send SIGKILL
Jun 7 08:08:07 RB user.info : nas : NAS wan (wl1 interface) successfully started
Jun 7 08:08:07 RB user.info : nas : NAS lan (wl1.1 interface) successfully started
Jun 7 08:08:21 RB user.info : nas : daemon successfully stopped
Jun 7 08:08:23 RB user.info : nas : daemon hanging, send SIGKILL
Jun 7 08:08:24 RB user.info : nas : NAS wan (wl1 interface) successfully started
Jun 7 08:08:24 RB user.info : nas : NAS lan (wl1.1 interface) successfully started
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Sat Jun 05, 2021 8:26 Post subject:
Router Model: Netgear R6400v2, board_id: U12H332T
Firmware Version: DD-WRT v3.0-r46885M Community Build (06/04/21)
Kernel Version: Linux 4.4.271 #1 SMP Fri Jun 4 12:51:07 CEST 2021 armv7l
Upgraded from: DD-WRT v3.0-r46836M Community Build (05/31/21)
Reset: No not this time
Status: Up and running for 2 hours, basic setup as Gateway, static leases, OpenVPN client with Policy Based Routing up and running, 2,4GHz and 5Ghz working, USB storage NAS working, WireGuard server working with 8 clients (phones , windows and two other routers for site-to-site setup), OpenVPN server working.
CTF&FA: 760 Mb/s upload, 850 Mb/s download (simple wired speedtest so only indicative)
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r46885 std (06/05/21)
Kernel: Linux 4.4.271 #3351 SMP Fri Jun 4 19:52:45 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound
Reset: No, not this time
Previous : r46854
Upgrade: Web and 1st succeed without reset.
Temperatures CPU 76.9 °C / WL1 56.1 °C
Load: 0.13, 0.07, 0.02
Uptime less 5 min
Errors: No, not at this moment.
WAN: DHCP
MTU:1500 Auto
Shortcut Forwarding Engine: CTF
Flow Acceleration: CTF & FA
STP: Disable
DHCP Server Enabled - Running
Samba Disabled
WRT-radauth Disabled
WRT-rflow Disabled
MAC-upd Disabled
CIFS Automount Disabled
Sputnik Agent Disabled
USB Support Disabled
Joined: 29 Sep 2020 Posts: 260 Location: United States
Posted: Sat Jun 05, 2021 15:43 Post subject:
Router Model: Netgear R7000P
Firmware Version: DD-WRT v3.0-r46885 std (06/05/21)
Kernel Version: Linux 4.4.271 #3357 SMP Sat Jun 5 03:42:29 +07 2021 armv7l
Reset: no
Mode: Gateway AP 2.4GHz & 5Ghz Unbound JFFS2
Status: working
Issues: running well thanks BrainSlayer and dd-wrt community
Router: Asus RT-AC68U rev B1
File Flashed: asus_rt-ac68u-firmware.trx
Firmware: 06/05/21-r46885
Kernel: Linux 4.4.271 #3351 SMP Fri Jun 4 19:52:45 +07 2021 armv7l
Previous: 05/28/21-r46788
Kernel: Linux 4.4.269 #3196 SMP Thu May 27 16:32:15 +07 2021 armv7l
Reset: No (edited)
Mode: AP/Gateway and Bridges (3) on 5Ghz for wired clients
Errors: No
Uptime: 10 min
Many thanks to BS and those who run this forum for all the hard work you all put in! _________________ ASUS RT-AC3100 AP Merlin 386.12_4
ASUS RT-AC68U Media Bridge/Merlin 386.12_4 (x2)
ASUS RT-AC68U AP r54604
ASUS RT-AC68U Gateway/AP r54604
Edgerouter-4, v2.0.9-hotfix7
Last edited by MysticGold04 on Sat Jun 05, 2021 22:36; edited 1 time in total
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r46885 std (06/05/21)
Kernel: Linux 4.4.271 #3355 Sat Jun 5 03:31:53 +07 2021 armv7l
Mode: gateway
Previous: r46836
Reset: no
Status: ctf enabled and working well so far.
Firmware: v3.0-r46885 std (06/05/21)
Router/Version: Netgear R7000 Kernel: Linux 4.4.271 #3351 SMP Fri Jun 4 19:52:45 +07 2021 armv7l
Previous: v3.0-r46854 std (06/03/21)
Mode/Status: AP wired and wireless / Up and running for 16 hours
Reset: Soft boot before and after upgrade
Temperatures: CPU 61.4 °C / WL0 46.5 °C / WL1 51.5 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec. Nothing unexpected in the syslog.
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r46885 std (06/05/21) (prev. DD-WRT v3.0-r46854 std (06/03/21))
Kernel: Linux 4.4.271 #3351 SMP Fri Jun 4 19:52:45 +07 2021 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: Ok, up 13:09h since keep alive reboot.
If using CTF instead of good old SFE, everything seems to work. BUT the very second I connect from external (LTE) to wireguard on WAN the device freezes, no oputput nothing, just reboot.
Will stay away from using CTF (ok, my WAN copper is only capable of ~11MBit/s, but had high hopes of lowering my ping from ~3x to below ~3x )
Otherwise CTF seems to work just fine!
Router/Version: Asus RT-N66U
File: dd-wrt.v24-468845 NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r46885 big (06/05/21) DD-WRT v3.0-r46854 big (06/03/21) (prev. DD-WRT v3.0-r46788 big (05/28/21))
Kernel: Linux 4.4.271 #9902 Sat Jun 5 03:57:40 +07 2021 mips
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Ok, up 12:07h since keep alive reboot.
Router/Version: Linksys EA6700
File/Kernel: linksys-ea6700-webflash.bin
Previous/Reset: no reset
Mode/Status: Gateway/WAP
Issues/Errors: WAN speed is only ⅔ of previous firmware versions. The last version I tried that gave me full WAN speed (500 MBit/s) was 46446. With the latest (46885) and two or three earlier versions, I get around 330 MBit/s. (With the computer connected to a LAN port, of course.)