Posted: Sat Jun 05, 2021 5:07 Post subject: New Build - 06/05/2021 - r46885
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Linksys EA8500...main router
DD-WRT v3.0-r46885 std (06/05/21)
Linux 4.9.271 #226 SMP Fri Jun 4 20:54:03 +07 2021 armv7l
GUI install over r46854
for some reason after the install I had to go to webif page '../Forward.asp' and click 'Apply Settings' before
the outside world could get to any machine/ports I have forwared.
all now is worky-fine
#
Netgear WNDR3700 V4
DD-WRT v3.0-r46885 std (06/05/21)
Linux 3.18.140-d6 #117859 Sat Jun 5 07:25:21 +07 2021 mips
GUI install over r46854
all good
-----
EA8500 only up 27 minutes when pic taken but she seems to worky ok
Archer C7 V5
Firmware: DD-WRT v3.0-r46885 std (06/05/21)
Update: GUI from 46854
Reset: No
Mode: AP/Gateway, provides DHCP for other routers in bridge/router mode, runs DDNS, USB printer connected, 5 GHz wifi disabled, 2.4 GHz with additional guest virtual interface.
Tweaks already applied: Set Key Renewal Interval to 0 in Wireless Security settings to solve some Wifi disconnections back in 46854. Havent tested reverting it to default value of 3600 in this build.
Issues (also present in others I tested: 44715, 46733, 46772, 46788, 46836, 46854):
- A Tplink WA850RE vanilla extender refuses to connect to AP, showing for a second as a client in Status>Wireless, and then disappearing, cycling every 5 seconds. Randomly, after several reboots of both devices, it gets a successful connection and holds fine after that until rebooted. SOLVED by changing Disable EAPOL Key Retries from Enable, to Disable. Changing this single setting didnt provide any results some time ago, but a lot of fine tuning has happened in my configuration since then.
- LED lights not working correctly in general, especially LAN port ones.
Joined: 16 Nov 2015 Posts: 6436 Location: UK, London, just across the river..
Posted: Sun Jun 06, 2021 13:53 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r46885 std (06/05/21)
Kernel Version Linux 3.18.140-d6 #117831 Sat Jun 5 06:27:08 +07 2021 mips
update: CLI r46316 > r46329
reset: NO
status: Operational 12h+
errors: Nothing new, for my set up...Status>LAN>active clients still has that small glitch of not showing the full IP if the IP has 192.168.111.100 this format, as the last stack of 3 overlaps the mac address...
_________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Router/Version: Netgear R7800
File: dd-wrt-webupgrade
Firmware: DD-WRT v3.0-r46885 std (06/05/21) (prev. DD-WRT v3.0-r46854 std (06/03/21))
Kernel: Linux 4.9.271 #228 SMP Sat Jun 5 02:08:22 +07 2021 armv7l
Mode: Gateway, 2.4G and 5G wifi, 1VAP @2.4G with different SSID, Wireguard for external access, WAN to 4G, Keep Alive reboot 6:02 in the morning
Reset: No
Status: Ok, up 12:11h since reboot.
Firmware Version: DD-WRT v3.0-r46885 std (06/05/21)
Kernel Version: Linux 4.9.271 #570 SMP Fri Jun 4 14:49:53 +07 2021 armv7l
Upgraded from: DD-WRT v3.0-r45229 std (1/1/21)
Reset: No,
Status: Up and running but clock speed now at 1700Mhz not 2Ghz any idea - is this now set manually in GUI?
Thanks BS _________________ Netgear R7800 PPPoE Main Router
Network IPV4 - Isolated Vlan's with IoT Devices. Unifi AC-Pro x 3 AP's, Router Wi-Fi Disabled. OVPN Server With Paid Commercial Wireguard Client's. Gateway Mode, DNSMasq, Static Leases & DHCP, Pi-Hole DNS & Running Unbound.
No one can build you the bridge on which you, and only you, must cross the river of life!
Home Main Gateway Router Router/Version: R7800
File/Kernel: DD-WRT v3.0-r46885 std (06/05/21)
Previous/Reset: r46836 / No, CLI Update
Mode/Status: GW / Working Well
Issues/Errors: none / none
Home Main AP Router Router/Version: R7800
File/Kernel: DD-WRT v3.0-r46885 std (06/05/21)
Previous/Reset: r46836 / No, CLI Update
Mode/Status: GW(double-nat) & AP / Working Well
Issues/Errors: none / none
This build r46885 feels snappy with my configuration, hasn't felt this fast in a long time!
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531