Posted: Thu Jun 03, 2021 11:57 Post subject: New Build - 06/03/2021 - r46854
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Thu Jun 03, 2021 12:49 Post subject:
Router/Version: Asus RT-N12D
File: dd-wrt.v24-#####_NEWD-2_K3.x_mega.bin
Firmware: DD-WRT v3.0-r46854 mega (06/03/21)
Kernel: Linux 4.4.269 #9846 Thu Jun 3 02:19:51 +07 2021 mips
Mode: OpenVPN Gateway
Previous: r46836
Reset?: N
Status: Working
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r46854 std (06/03/21)
Kernel: Linux 4.4.269 #3305 SMP Thu Jun 3 01:04:31 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound
Reset: No, not this time
Previous : r46836
Upgrade: Web and 1st succeed without reset.
Temperatures CPU 75.8 °C / WL1 55.6 °C
Load: 0.06, 0.03, 0.00
Uptime 1hour 15 min
Errors: No, not at this moment.
WAN: DHCP
MTU:1500 Auto
Shortcut Forwarding Engine: CTF
Flow Acceleration: CTF & FA
STP: Disable
DHCP Server Enabled - Running
Samba Disabled
WRT-radauth Disabled
WRT-rflow Disabled
MAC-upd Disabled
CIFS Automount Disabled
Sputnik Agent Disabled
USB Support Disabled
Router/Version: Netgear WNDR4000
File/Kernel: k3x nv64k / Linux 4.4.269 (OpenWrt GCC 10.1.0 r13225-bc0288b768) #9846 Thu Jun 3 02:19:51 +07 2021
Previous/Reset: 44715/yup
Mode/Status: AP/working
Issues/Errors: GUI sometimes stops responding
I've had issues since Dec updating k3x bcm devices, where the GUI and telnet would become inaccessible (which is why this was previously on a Nov 2020 build). I expected the same here, so was prepared (and had intended) to hook up serial to debug, but this build's GUI is working, including after reset. It does though sometimes stops responding (both either changes tabs or using Save/Apply) and I have to refresh. Better than before though
I see some new options here and there; I've been messing w/ openwrt devices mostly the past year. Need to brush up on this new BCM swconfig usage...the GUI and CLI weren't jiving in setting up this AP to include the WAN port. I moved the WAN to VLAN1, but swconfig still showed:
VLAN 1: ports: 0 1 2 3 8t
VLAN 2: ports: 4 8
until I blanked VLAN '2' (which made it another '0'). But now it just has:
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r46854 std (06/03/21) (prev. DD-WRT v3.0-r46788 std (05/28/21))
Kernel: Linux 4.4.269 #3305 SMP Thu Jun 3 01:04:31 +07 2021 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: Ok, 10:11h up.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-46854_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r46854 big (06/03/21) (prev. DD-WRT v3.0-r46788 big (05/28/21))
Kernel: Linux 4.4.269 #9842 Thu Jun 3 02:16:05 +07 2021 mips
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Ok, 9:08h up.
Joined: 18 Mar 2014 Posts: 12837 Location: Netherlands
Posted: Fri Jun 04, 2021 15:00 Post subject:
Router Model: Linksys E2000 (converted N320)
Firmware Version: DD-WRT v3.0-r46854 mega (06/03/21)
Kernel Version: Linux 4.4.269 #9846 Thu Jun 3 02:19:51 +07 2021 mips
Upgraded: from DD-WRT v3.0-r46733 mega (05/21/21)
Reset: Yes
Status: Up and running for 2 hours, basic setup as Gateway, static leases, OpenVPN client (tun) (on Keepsolid) up and running, VPN download (speed 5 Mb/s), Wifi 2,4GHz working.
WireGuard client working ( speed 23 Mb/s )
Some simple speed testing (timed file up and downloading)
Without SFE: 40 /40 Mb/s, U/D
With SFE: 170/170 Mb/s U/D
With CTF: 260/320 Mb/s U/D
Posted: Fri Jun 04, 2021 21:40 Post subject: Asus RT-AC87U
Router/Version: Asus RT-AC87U
File/Kernel: asus_rt-ac87u-firmware.trx/Linux 4.4.269 #3313 SMP Thu Jun 3 01:53:12 +07 2021 armv7l
Previous/Reset: r46733/no
Mode/Status: WAP, wg-client, WAN disabled, DHCP-server
Issues/Errors: Not safely usable.
Something is still wrong.
'Apply' (for sure in Setup/Basic Setup, less likely in Administration/Management) sends my router into nirwana: the GUI will not come back.
It seems safe to use 'Save' and reboot the router with the GUI.
That's about all I know now.
Back to r46733. _________________ 3xBuffalo WLI-H4-D1300
1xBuffalo WZR-D1800H
1xBuffalo WHR-HP-G300N
1xBuffalo WHR-1166D (stock f/w)
1xAsus RT-AC87U
1xAsus RT-AC88U
1xTP710
Joined: 30 Jul 2007 Posts: 33 Location: Melbourne, Australia
Posted: Sat Jun 05, 2021 4:52 Post subject:
Am aware VLAN configuration is changing to 'Switch Config' - testing using a spare Asus RT-N16:
Router/Version: Asus RT-N16
File/Kernel: dd-wrt.v24-46854_NEWD-2_K3.x-big-RT-N16.trx / Linux 4.4.269 #9842 Thu Jun 3 02:16:05 +07 2021 mips
Previous/Reset: DD-WRT v3.0-r46446 big (04/24/21) / no reset on upgrade, restored factory defaults after and performed 2 further reboots
Mode/Status: Defaults (AP) only - just trying new VLAN configuration
Issues/Errors: Observation - seeing VLAN IDs > 4096 (16000 on port5vlans after reboot also VLAN IDs in the 10s of thousands if I add a single tagged VLAN 11 to port 4)
After adding tagged VLAN 11 to port 4 (leaving VLAN 1 on port 4 [as is shown in the web UI, although this is inconsistent with NVRAM settings above - which shows VLAN 0]):
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Sat Jun 05, 2021 11:23 Post subject: New Build - 06/03/2021 - r46854
Router/Version: Netgear WNR3500L v2
Kernel: Linux 4.4.269 #9830 Thu Jun 3 02:03:23 +07 2021 mips
Reset: No, not this time
Mode: Internet gateway, wifi ap, dnsmasq server
Status: Working
Issues: kern.warn kernel: br0: received packet on eth1 with own address as source address repeated many times, poor WAN performance. Internet speed 260 mbit/s max, 310 - 315 mbit/s with ISP modem connected to network card via rj45)
Uptime: more than 48h
Device is updated via ssh. Generally router works good, it's issue with internet speed and MAC address. Actually I'm rebuild my firewall and try to increase generic performance of device.