New Build - 06/03/2021 - r46854

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 3161

PostPosted: Thu Jun 03, 2021 11:57    Post subject: New Build - 06/03/2021 - r46854 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r46836 (GitHub mirror)

Notes:
OpenVPN 2.5.2: Guides, Server, PBR, Reverse PBR, Client (see second post), Kill Switch, update tips, scripts and more.
WireGuard 1.0.20210219/Tools: Guides, Client, Server, Advanced, PBR, KS, update tips, scripts & more. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• Broadcom MIPS devices are now on kernel 4.4. • Support added for TP-Link Archer C8 v2 and v3.
SmartDNSMiniDLNA • Unbound 1.13.1 • CoovaChilli 1.6 • Tor 0.4.5.8 • OpenSSL 1.1.1k • Dnsmasq 2.85 • Privoxy 3.0.32
In-kernel Samba (ksmbd 3.3.9+): default min/max versions changed. • WSD updateANTFS/NTFS3 kernel mode driver++.
• Added swconfig support for Broadcom devices.
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 (Fragattack) fixed.
• "Assign WAN port to Switch" feature removed to be reworked in future release: 46782

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs in 40562 - 40566. Effective startup commands discussion thread is here.
If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
Show us your findings with steps to reproduce, configuration, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 236
Location: Maine, USA

PostPosted: Thu Jun 03, 2021 12:49    Post subject: Reply with quote
Router/Version: Asus RT-N12D
File: dd-wrt.v24-#####_NEWD-2_K3.x_mega.bin
Firmware: DD-WRT v3.0-r46854 mega (06/03/21)
Kernel: Linux 4.4.269 #9846 Thu Jun 3 02:19:51 +07 2021 mips
Mode: OpenVPN Gateway
Previous: r46836
Reset?: N
Status: Working
IONK
DD-WRT User


Joined: 19 Aug 2011
Posts: 321

PostPosted: Thu Jun 03, 2021 15:20    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.269 #3305 SMP Thu Jun 3 01:04:31 +07 2021 armv7l
Previous/Reset: DD-WRT v3.0-r46836 std (06/01/21) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + USB Storage + lighttpd + ProFTPD + Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases: https://politepol.com/fd/NfCoAP5bUJXU
easyddup - A simple upgrade/downgrade utility by yoyoma2
saphirely
DD-WRT User


Joined: 13 Dec 2020
Posts: 75

PostPosted: Thu Jun 03, 2021 16:30    Post subject: Reply with quote
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r46854 std (06/03/21)
Kernel: Linux 4.4.269 #3305 SMP Thu Jun 3 01:04:31 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound
Reset: No, not this time
Previous : r46836
Upgrade: Web and 1st succeed without reset.
Temperatures CPU 75.8 °C / WL1 55.6 °C
Load: 0.06, 0.03, 0.00
Uptime 1hour 15 min
Errors: No, not at this moment.

WAN: DHCP
MTU:1500 Auto
Shortcut Forwarding Engine: CTF
Flow Acceleration: CTF & FA
STP: Disable

DHCP Server Enabled - Running
Samba Disabled
WRT-radauth Disabled
WRT-rflow Disabled
MAC-upd Disabled
CIFS Automount Disabled
Sputnik Agent Disabled
USB Support Disabled

Works well.
flyzipper
DD-WRT Guru


Joined: 21 Feb 2016
Posts: 504

PostPosted: Thu Jun 03, 2021 16:31    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r46854 std (06/03/21)
Kernel: Linux 4.4.269 #3305 SMP Thu Jun 3 01:04:31 +07 2021 armv7l
Previous: r46836
Mode/Status: Gateway / working
Issues/Errors: Working well so far.

Uptime: 10hrs 54mins
Upgrade: via web UI, no issues
Reset: no
Temperatures: CPU 66.9 °C / WL0 46.5 °C / WL1 52.3 °C
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 6203
Location: Romerike, Norway

PostPosted: Thu Jun 03, 2021 18:09    Post subject: Reply with quote
Router Model: Asus RT-AC66U
Firmware Version:DD-WRT v3.0-r46854 giga (06/03/21)
Kernel Version: Linux 4.4.269 #9830 Thu Jun 3 02:03:23 +07 2021 mips

Status: Working
Groundnet
DD-WRT Novice


Joined: 23 Nov 2018
Posts: 4

PostPosted: Thu Jun 03, 2021 21:00    Post subject: Reply with quote
Router/Version: Netgear WNDR3700v3
File: dd-wrt.v24-46854_NEWD-2_K3.x_mega-nv64k.bin
Kernel: Linux 4.4.269 #9846 Thu Jun 3 02:19:51 +07 2021 mips
Previous/Reset: 44700 / No reset
Mode/Status: Gateway / Working
Issues/Errors: Nothing to report
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2634
Location: Indy

PostPosted: Thu Jun 03, 2021 21:15    Post subject: Reply with quote
Router/Version: Netgear WNDR4000
File/Kernel: k3x nv64k / Linux 4.4.269 (OpenWrt GCC 10.1.0 r13225-bc0288b768) #9846 Thu Jun 3 02:19:51 +07 2021
Previous/Reset: 44715/yup
Mode/Status: AP/working
Issues/Errors: GUI sometimes stops responding

I've had issues since Dec updating k3x bcm devices, where the GUI and telnet would become inaccessible (which is why this was previously on a Nov 2020 build). I expected the same here, so was prepared (and had intended) to hook up serial to debug, but this build's GUI is working, including after reset. It does though sometimes stops responding (both either changes tabs or using Save/Apply) and I have to refresh. Better than before though Wink

I see some new options here and there; I've been messing w/ openwrt devices mostly the past year. Smile Need to brush up on this new BCM swconfig usage...the GUI and CLI weren't jiving in setting up this AP to include the WAN port. I moved the WAN to VLAN1, but swconfig still showed:
    VLAN 1: ports: 0 1 2 3 8t
    VLAN 2: ports: 4 8
until I blanked VLAN '2' (which made it another '0'). But now it just has:
    VLAN 1: ports: 0 1 2 3 4 8t
...so I should be good. Wink

_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
OPNsense x64 5050e ITX|FreshTomato: EA6900v1.1@1GHz, F7D8302@532|DD: DIR-810L, 4000@533, R6300v1,
RT-N66U@663, E1500@353, WRT54G{Lv1.1,Sv6}@250
|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Zyxx
DD-WRT User


Joined: 28 Dec 2018
Posts: 425

PostPosted: Fri Jun 04, 2021 13:15    Post subject: Reply with quote
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r46854 std (06/03/21) (prev. DD-WRT v3.0-r46788 std (05/28/21))
Kernel: Linux 4.4.269 #3305 SMP Thu Jun 3 01:04:31 +07 2021 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: Ok, 10:11h up.

Router/Version: Asus RT-N66U
File: dd-wrt.v24-46854_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r46854 big (06/03/21) (prev. DD-WRT v3.0-r46788 big (05/28/21))
Kernel: Linux 4.4.269 #9842 Thu Jun 3 02:16:05 +07 2021 mips
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Ok, 9:08h up.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 8184
Location: Netherlands

PostPosted: Fri Jun 04, 2021 15:00    Post subject: Reply with quote
Router Model: Linksys E2000 (converted N320)

Firmware Version: DD-WRT v3.0-r46854 mega (06/03/21)
Kernel Version: Linux 4.4.269 #9846 Thu Jun 3 02:19:51 +07 2021 mips

Upgraded: from DD-WRT v3.0-r46733 mega (05/21/21)
Reset: Yes

Status: Up and running for 2 hours, basic setup as Gateway, static leases, OpenVPN client (tun) (on Keepsolid) up and running, VPN download (speed 5 Mb/s), Wifi 2,4GHz working.
WireGuard client working ( speed 23 Mb/s )

Some simple speed testing (timed file up and downloading)
Without SFE: 40 /40 Mb/s, U/D
With SFE: 170/170 Mb/s U/D
With CTF: 260/320 Mb/s U/D

Errors: No

Thanks BS!

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
WireGuard Documents & Guides:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327397
OpenVPN Documents & Guides: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327398
IPSET: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327261
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
kooper2013
DD-WRT User


Joined: 10 Jan 2013
Posts: 90
Location: DE

PostPosted: Fri Jun 04, 2021 21:40    Post subject: Asus RT-AC87U Reply with quote
Router/Version: Asus RT-AC87U
File/Kernel: asus_rt-ac87u-firmware.trx/Linux 4.4.269 #3313 SMP Thu Jun 3 01:53:12 +07 2021 armv7l
Previous/Reset: r46733/no
Mode/Status: WAP, wg-client, WAN disabled, DHCP-server
Issues/Errors: Not safely usable.

Something is still wrong.
'Apply' (for sure in Setup/Basic Setup, less likely in Administration/Management) sends my router into nirwana: the GUI will not come back.

It seems safe to use 'Save' and reboot the router with the GUI.

That's about all I know now.

Back to r46733.

_________________
3xBuffalo WLI-H4-D1300
1xBuffalo WZR-D1800H
1xBuffalo WHR-HP-G300N
1xBuffalo WHR-1166D (stock f/w)
1xAsus RT-AC87U
1xAsus RT-AC88U
1xTP710
scans
DD-WRT Novice


Joined: 04 Oct 2018
Posts: 22

PostPosted: Fri Jun 04, 2021 23:30    Post subject: Reply with quote
Router/Version: Netgear WNDR4000 x 4
File/Kernel: dd-wrt.v24-46854_NEWD-2_K3.x_mega-nv64k
Reset: No
Mode/Status: DHCP/AP/Wireguard/DynDNS

Thank you BS! You fixed the DHCP problem (even with MAC address clone) on the WAN port for the one running as a router.
msj100
DD-WRT Novice


Joined: 30 Jul 2007
Posts: 33
Location: Melbourne, Australia

PostPosted: Sat Jun 05, 2021 4:52    Post subject: Reply with quote
Am aware VLAN configuration is changing to 'Switch Config' - testing using a spare Asus RT-N16:

Router/Version: Asus RT-N16
File/Kernel: dd-wrt.v24-46854_NEWD-2_K3.x-big-RT-N16.trx / Linux 4.4.269 #9842 Thu Jun 3 02:16:05 +07 2021 mips
Previous/Reset: DD-WRT v3.0-r46446 big (04/24/21) / no reset on upgrade, restored factory defaults after and performed 2 further reboots
Mode/Status: Defaults (AP) only - just trying new VLAN configuration
Issues/Errors: Observation - seeing VLAN IDs > 4096 (16000 on port5vlans after reboot also VLAN IDs in the 10s of thousands if I add a single tagged VLAN 11 to port 4)

Before upgrade (on r46446):

root@DD-WRT:~# nvram show 2>/dev/null | grep -E port[0-9]+vlans= | sort
port0vlans=1
port1vlans=0
port2vlans=0
port3vlans=0
port4vlans=0
port5vlans=0 1 16
root@DD-WRT:~# nvram show 2>/dev/null | grep -E vlan[0-9]+ports= | sort
vlan0ports=1 2 3 4 5*
vlan1ports=4 3 2 1 8*
vlan2ports=0 8
root@DD-WRT:~# nvram show 2>/dev/null | grep -E vlan[0-9]+hwname= | sort
vlan0hwname=et0
vlan1hwname=et0
vlan2hwname=et0


Immediately after upgrade (to r46854):

root@DD-WRT:~# nvram show 2>/dev/null | grep -E port[0-9]+vlans= | sort
port0vlans=1
port1vlans=0
port2vlans=0
port3vlans=0
port4vlans=0
port5vlans=0 1 16000
port6vlans=
root@DD-WRT:~# nvram show 2>/dev/null | grep -E vlan[0-9]+ports= | sort
vlan0ports=1 2 3 4 5*
vlan1ports=4 3 2 1 8*
vlan2ports=0 8
root@DD-WRT:~# nvram show 2>/dev/null | grep -E vlan[0-9]+hwname= | sort
vlan0hwname=et0
vlan1hwname=et0
vlan2hwname=et0


After adding tagged VLAN 11 to port 4 (leaving VLAN 1 on port 4 [as is shown in the web UI, although this is inconsistent with NVRAM settings above - which shows VLAN 0]):

root@DD-WRT:~# nvram show 2>/dev/null | grep -E port[0-9]+vlans= | sort
port0vlans=2 18000 19000 20000
port1vlans=1 18000 19000 20000
port2vlans=1 18000 19000 20000
port3vlans=1 18000 19000 20000
port4vlans=1 3 16000 18000 19000 20000
port5vlans=1 2 3 16000
root@DD-WRT:~# nvram show 2>/dev/null | grep -E vlan[0-9]+ports= | sort
vlan0ports=1 2 3 4 5*
vlan1ports=4 3 2 1 8*
vlan2ports=0 8
root@DD-WRT:~# nvram show 2>/dev/null | grep -E vlan[0-9]+hwname= | sort
vlan0hwname=et0
vlan1hwname=et0
vlan2hwname=et0

_________________
Asus RT-AC87U - dd-wrt
Asus RT-AC68U - dd-wrt
Asus RT-N16 - dd-wrt
TP-Link TL-MR3020 - OpenWRT
VAPs / VLANs / PBR / Entware
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 223
Location: Szczecin, Poland EU

PostPosted: Sat Jun 05, 2021 11:23    Post subject: New Build - 06/03/2021 - r46854 Reply with quote
Router/Version: Netgear WNR3500L v2
Kernel: Linux 4.4.269 #9830 Thu Jun 3 02:03:23 +07 2021 mips
Reset: No, not this time
Mode: Internet gateway, wifi ap, dnsmasq server
Status: Working
Issues: kern.warn kernel: br0: received packet on eth1 with own address as source address repeated many times, poor WAN performance. Internet speed 260 mbit/s max, 310 - 315 mbit/s with ISP modem connected to network card via rj45)
Uptime: more than 48h

Device is updated via ssh. Generally router works good, it's issue with internet speed and MAC address. Actually I'm rebuild my firewall and try to increase generic performance of device.
xraive
DD-WRT User


Joined: 08 Mar 2016
Posts: 127

PostPosted: Sun Jun 06, 2021 16:52    Post subject: Reply with quote
Router Model / Version: Netgear R6300V2
Previous Firmware:DD-WRT v3.0-r46836 std (06/01/21)
Current Firmware: DD-WRT v3.0-r46854 std (06/03/21)
File: netgear-r6300v2-webflash.bin / CLI Flash (easyddup.sh)
Kernel: Linux 4.4.269 #3305 SMP Thu Jun 3 01:04:31 +07 2021 armv7l
Reset: No
Wireless: Disabled
Routing: Operating - Gateway (WAN PPPoE)
Setup: SFE, NTP, DDNS (inadyn-Entware), Wireguard Server
Services: DNSMasq (GUI+ additional options on USB, Lighttpd, Syslog, SSH, FreeRadius, Telnet, USB, ProFTPD (with users), Samba (with users), Adblock for DD-WRT by Yamaraj, OpenVPN Client
Security: Firewall Enabled
NAT/QoS: HTB + FQ_CODEL
Administration:Remote Access (HTTPS & SSH), Startup Script (For DNSMasq & inadyn)
Uptime: up 1 day, 4:22, load average: 0.03, 0.05, 0.00
Temperature: CPU 70.2 °C / Not available
Status: OK
Issues: None

All good with this build. Thanks once again BS.
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum