New Build - 05/30/2021 - r46816

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Sun May 30, 2021 12:02    Post subject: New Build - 05/30/2021 - r46816 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r46788 (GitHub mirror)

Notes:
OpenVPN 2.5.2: Guides, Server, PBR, Reverse PBR, Client (see second post), Kill Switch, update tips, scripts and more.
WireGuard 1.0.20210219/Tools: Guides, Client, Server, Advanced, PBR, KS, update tips, scripts & more. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
Select ath10k radios now feature on-the-fly firmware type switching between Customized DD-WRT and Vanilla QCA binaries!
SmartDNSMiniDLNA • Unbound 1.13.1 • CoovaChilli 1.6 • Tor 0.4.5.8 • OpenSSL 1.1.1k • Dnsmasq 2.85 • Privoxy 3.0.32
In-kernel Samba (ksmbd 3.3.9+): default min/max versions changed. • WSD updateANTFS/NTFS3 kernel mode driver++.
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 (Fragattack) fixed.
• "Assign WAN port to Switch" feature removed to be reworked in future release: 46782

Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Sun May 30, 2021 13:18    Post subject: Reply with quote
Linksys EA8500 ...main gateway router
DD-WRT v3.0-r46816 std (05/30/21)
Linux 4.9.269 #211 SMP Sun May 30 01:53:57 +07 2021 armv7l
GUI install over r46788
everything woky ok

#

Netgear WNDR3700 V4
DD-WRT v3.0-r46816 std (05/30/21)
Linux 3.18.140-d6 #117256 Sun May 30 16:32:08 +07 2021 mips
GUI install over r46788
all ok
sweatbee
DD-WRT User


Joined: 17 Jan 2018
Posts: 64
Location: Georgia, USA

PostPosted: Sun May 30, 2021 16:56    Post subject: Reply with quote
Router/Version: r7800 DD-WRT v3.0-r46816 std (05/30/21)
File/Kernel: Linux 4.9.269 #213 SMP Sun May 30 05:20:05 +07 2021 armv7l
Previous/Reset: r46716 std 05/20/2021 / No reset
Mode/Status: Access Point
Issues/Errors: None noted so far. Up 22 minutes. Update by GUI

2.4 GHz on VANILLA, 5 GHz on DD-WRT

_________________
R7800 r53339 std (08/01/23)
Private network on bridge br0 = eth1 (vlan 1) + wlan0 + wlan1.
Guest network on bridge br1 = eth1.4 (vlan 4) + VAPs (wlan0.1 + wlan1.1) for IOT devices
(Roku's, Amazon Echos, smart switches, etc.) and guest.
Noob still finding my way.

swconfig dev switch0 set enable_vlan 1
swconfig dev switch0 vlan 1 set ports "1 2 6"
swconfig dev switch0 vlan 4 set ports "3 4 6t"
swconfig dev switch0 set apply
vconfig add eth1 4
brctl addif br1 eth1.4
ifconfig eth1.4 up
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Sun May 30, 2021 20:37    Post subject: Reply with quote
Router Model: dir-862L(x2), x86_64(2x qca9984 ,1x qca9882)

Status: it runs
Reset: no
Errors: see tickets below

https://svn.dd-wrt.com/ticket/5225 *
https://svn.dd-wrt.com/ticket/5603 *
https://svn.dd-wrt.com/ticket/5848
https://svn.dd-wrt.com/ticket/5938
https://svn.dd-wrt.com/ticket/6286
https://svn.dd-wrt.com/ticket/6315
https://svn.dd-wrt.com/ticket/6481 *
https://svn.dd-wrt.com/ticket/6495 *
https://svn.dd-wrt.com/ticket/6655
https://svn.dd-wrt.com/ticket/6842
https://svn.dd-wrt.com/ticket/6903 *
https://svn.dd-wrt.com/ticket/6921
https://svn.dd-wrt.com/ticket/7154
https://svn.dd-wrt.com/ticket/7222 *
https://svn.dd-wrt.com/ticket/7226
https://svn.dd-wrt.com/ticket/7246
https://svn.dd-wrt.com/ticket/7284
https://svn.dd-wrt.com/ticket/7331
https://svn.dd-wrt.com/ticket/7338

bad commit r45727 ruining ng-mixed, make sure to override it manually..

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

curaasan
DD-WRT Novice


Joined: 23 May 2014
Posts: 15
Location: Poland

PostPosted: Sun May 30, 2021 21:54    Post subject: Reply with quote
Router/Version: TP-Link TL-WDR3600 v1
File/Kernel: Linux 3.10.108-d11 #82395 Sun May 30 14:27:24 +07 2021 mips
Previous/Reset: r44467/yes
Mode/Status: Gateway
Issues/Errors: None noted so far. Update by GUI.
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Mon May 31, 2021 15:05    Post subject: Reply with quote
Update method: SSH / CLI
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r46816 std (05/30/21)
Previous/Reset: DD-WRT v3.0-r46788 std (05/28/21) / No
Mode/Status: Gateway / Working Normally / Clock 2000MHz
Issues/Errors: None

Thanks, BrainSlayer!

_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6410
Location: UK, London, just across the river..

PostPosted: Mon May 31, 2021 18:15    Post subject: Reply with quote
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r46816 std (05/30/21)
Kernel Version Linux 3.18.140-d6 #117228 Sun May 30 15:45:19 +07 2021 mips

update: CLI r46788 > r46816
reset: NO
status: Operational 48h+
errors: Nothing for my set up, yet... just a small GUI setting glitch, where LAN statistics has a 192.168.100.100 IP like this the last 3 numbers are not visible...

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
millhauz
DD-WRT Novice


Joined: 31 Oct 2018
Posts: 2

PostPosted: Mon May 31, 2021 19:19    Post subject: Reply with quote
Router/Version: Netgear R7500v2
File/Kernel: Linux DD-WRT 4.9.269 #212 SMP Sun May 30 05:10:51 +07 2021 armv7l DD-WRT
Previous/Reset: Kong 37495M (10-28-2018) / reset after flash
Mode/Status: Gateway / No wireless AP, offloaded to a UniFi AP / ~30m so far
Issues/Errors: Update via UI failed and the UI would not come back while WAN connectivity stayed up and so did telnet. Used the telnet method, nvrame erase && reboot, all good after. UI seems much snappier and things like load averages work better (previously zeroes). Only thing I've noticed so far is that the CPU seems to not downclock itself - staying at 1400Mhz. Previously I think it downclocked to 700Mhz (don't quote me on it, but I've definitely seen it report 700).
Tested network speed, jitter, and packet loss - all as good or better (no idea why it would be better, but just observing).
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Mon May 31, 2021 19:47    Post subject: Reply with quote
millhauz wrote:
Only thing I've noticed so far is that the CPU seems to not downclock itself

been like that a long time now ... BS has its CPU frequency set to 'Performance' (always at max CPU)
you can change it if ya want --- I have the EA8500 set to 'ondemand' so it usually stays at 800 rather than 1400 MHz ...
...but I also only have a 50up/50dwn ISP connection so she is always just fine Twisted Evil

EDIT:

telnet or ssh and enter one of these

# on demand scaling enter below command #
Code:
for CPUFREQ in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do [ -f $CPUFREQ ] || continue; echo -n ondemand > $CPUFREQ; done

# performance scaling locked on Max CPU freq enter below command #
Code:
for CPUFREQ in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do [ -f $CPUFREQ ] || continue; echo -n performance > $CPUFREQ; done


Don't try to run either from the webif page ../Diagnostics.asp cause most likely WILL NOT work.
However, on that same page you can paste in the 'Startup' box and then click 'Save Startup'
and when it is ever rebooted the commands will work ....tis prolly the best method since you then never have to worry with it on upgrades unless you do a reset.
madmark
DD-WRT Novice


Joined: 29 Jul 2019
Posts: 31

PostPosted: Mon May 31, 2021 21:26    Post subject: Reply with quote
Router Model: TP-Link ARCHER-C5 v1
Kernel Version: Linux 3.18.140-d6
Previous/Reset: 05/25/2021 - r46750 / No
Mode/Status: Gateway /2.4 GHz,5.0 GHz (Vanilia), IPv4, Port Forwarding, NTP TimeSync, Samba, ProFTPD, miniDLNA, VPN, Upnp

Issues/Errors: router is resetting itself when is miniDLNA is on and when is connected 128GB pen drive. I turn off samba and miniDLNA. Only on is server FTP. Router is working but is resting when I want to send to ftp some files. When I'm downloading from FTP router works.

Jan 1 01:00:48 DD-WRT kern.notice kernel: [ 48.130000] SCSI subsystem initialized
Jan 1 01:00:48 DD-WRT kern.info kernel: [ 48.410000] usb-storage 2-1:1.0: USB Mass Storage device detected
Jan 1 01:00:48 DD-WRT kern.info kernel: [ 48.410000] scsi host0: usb-storage 2-1:1.0
Jan 1 01:00:48 DD-WRT kern.info kernel: [ 48.420000] usbcore: registered new interface driver usb-storage
Jan 1 01:00:48 DD-WRT kern.info kernel: [ 48.800000] usblp 1-1:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0904
Jan 1 01:00:48 DD-WRT kern.info kernel: [ 48.810000] usbcore: registered new interface driver usblp
Jan 1 01:00:49 DD-WRT kern.notice kernel: [ 49.420000] scsi 0:0:0:0: Direct-Access Wilk PMAP PQ: 0 ANSI: 6
Jan 1 01:00:49 DD-WRT kern.notice kernel: [ 49.430000] sd 0:0:0:0: [sda] 241620096 512-byte logical blocks: (123 GB/115 GiB)
Jan 1 01:00:49 DD-WRT kern.notice kernel: [ 49.450000] sd 0:0:0:0: [sda] Write Protect is off
Jan 1 01:00:49 DD-WRT kern.debug kernel: [ 49.450000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
Jan 1 01:00:49 DD-WRT kern.err kernel: [ 49.450000] sd 0:0:0:0: [sda] No Caching mode page found
Jan 1 01:00:49 DD-WRT kern.err kernel: [ 49.460000] sd 0:0:0:0: [sda] Assuming drive cache: write through

Jan 1 01:00:49 DD-WRT kern.info kernel: [ 49.480000] sda: sda1
Jan 1 01:00:49 DD-WRT kern.notice kernel: [ 49.500000] sd 0:0:0:0: [sda] Attached SCSI removable disk
Jan 1 01:00:49 DD-WRT user.info : cron : daemon successfully stopped
Jan 1 01:00:50 DD-WRT user.info : proftpd : FTP Server successfully stopped
Jan 1 01:00:52 DD-WRT kern.info kernel: [ 52.160000] ANTFS Module: Version 1.0
Jan 1 01:00:53 DD-WRT kern.alert kernel: [ 53.180000] fast-classifier: shutting down
Jan 1 01:00:53 DD-WRT user.info : sfe : shortcut forwarding engine successfully stopped
millhauz
DD-WRT Novice


Joined: 31 Oct 2018
Posts: 2

PostPosted: Tue Jun 01, 2021 0:42    Post subject: Reply with quote
mrjcd wrote:
millhauz wrote:
Only thing I've noticed so far is that the CPU seems to not downclock itself

been like that a long time now ... BS has its CPU frequency set to 'Performance' (always at max CPU)
you can change it if ya want --- I have the EA8500 set to 'ondemand' so it usually stays at 800 rather than 1400 MHz ...
...but I also only have a 50up/50dwn ISP connection so she is always just fine Twisted Evil

EDIT:

telnet or ssh and enter one of these

# on demand scaling enter below command #
Code:
for CPUFREQ in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do [ -f $CPUFREQ ] || continue; echo -n ondemand > $CPUFREQ; done

# performance scaling locked on Max CPU freq enter below command #
Code:
for CPUFREQ in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do [ -f $CPUFREQ ] || continue; echo -n performance > $CPUFREQ; done


Don't try to run either from the webif page ../Diagnostics.asp cause most likely WILL NOT work.
However, on that same page you can paste in the 'Startup' box and then click 'Save Startup'
and when it is ever rebooted the commands will work ....tis prolly the best method since you then never have to worry with it on upgrades unless you do a reset.


Oh, sorry! Didn't catch that change. Thanks for the instructions! Shortly after I ran the command, I saw 800/800 Mhz for the 2 cores in Status.

Had some rebind errors from dnsmasq, but after some googling found that you need to add
Code:
rebind-domain-ok=/plex.direct/
to the Additional Dnsmasq Options.

The thing I am looking out for is QOS being enabled causing something to fall over. On the Kong build 37495M I stopped using QOS because for some reason Internet stability would go to hell every few hours. So far as so good though. I am still tweaking the settings to try to figure out what's ideal (I am new to this), but I haven't had overall connectivity problems with it enabled.[/code]
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Tue Jun 01, 2021 0:56    Post subject: Reply with quote
I been using HFSC CAKE for long time now and it does fine by me ---- probably depends alot on you ISP speed & connection type Razz
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum