DD-WRT :: View topic - New Build - 05/28/2021

New Build - 05/28/2021 - r46788

DD-WRT Forum Index -> Atheros WiSOC based Hardware

View previous topic :: View next topic

Author

Message

blkt
DD-WRT Guru

Joined: 20 Jan 2019
Posts: 5690

Posted: Fri May 28, 2021 9:56 Post subject: New Build - 05/28/2021 - r46788

[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.

Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r46750 (GitHub mirror)

Notes:
• OpenVPN 2.5.2: Guides, Server, PBR, Reverse PBR, Client (see second post), Kill Switch, update tips, scripts and more.
• WireGuard 1.0.20210219/Tools: Guides, Client, Server, Advanced, PBR, KS, update tips, scripts & more. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
• Select ath10k radios now feature on-the-fly firmware type switching between Customized DD-WRT and Vanilla QCA binaries!
• SmartDNS • MiniDLNA • Unbound 1.13.1 • CoovaChilli 1.6 • Tor 0.4.5.8 • OpenSSL 1.1.1k • Dnsmasq 2.85 • Privoxy 3.0.32
• In-kernel Samba (ksmbd 3.3.9 +): default min/max versions changed. • WSD update • ANTFS/NTFS3 kernel mode driver ++.
• CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 (Fragattack) fixed.
• "Assign WAN port to Switch" feature removed to be reworked in future release: 46782

Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:

Code:

[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]

Sponsor

mrjcd
DD-WRT Guru

Joined: 31 Jan 2015
Posts: 6285
Location: Texas

Posted: Fri May 28, 2021 11:31 Post subject:

Netgear WNDR3700 V4
DD-WRT v3.0-r46788 std (05/28/21)
Linux 3.18.140-d6 #116992 Fri May 28 05:52:37 +07 2021 mips
GUI install over r46779
good

#

Linksys EA8500
DD-WRT v3.0-r46788 std (05/28/21)
Linux 4.9.269 #207 SMP Thu May 27 15:18:19 +07 2021 armv7l
good

main gateway router has:
DD-WRT v3.0-r46788 std (05/27/21)
Linux 4.9.269 #205 SMP Thu May 27 12:30:50 +07 2021 armv7l
she is worky great --- up 23:05 --- so I will leave her alone Twisted Evil

---
EDIT: alright then ---
I put this on main gateway EA8500 cause the previous r46788 would:
CPUs hang at 100% after upload several files to its USB via samba. Rolling Eyes

After GUI installing this r46788 public release I uloaded a couple GBs and
she is all good showing CPUs going back to normal.

since I have previous r46788 listed as recommened on the EA8500 install webpage
I will change it to this public release
AND just so you know the r46788 public release has sha256sum =
2988bf90a9de8041d1c6bd2d8b26a7e0346f956a3ae572f20b6c157683b6f936

Last edited by mrjcd on Fri May 28, 2021 15:14; edited 1 time in total

MLandi
DD-WRT Guru

Joined: 04 Dec 2007
Posts: 1018

Posted: Fri May 28, 2021 12:39 Post subject:

Update method: SSH / CLI
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r46788 std (05/28/21)
Previous/Reset: DD-WRT v3.0-r46772 std (05/26/21) / No
Mode/Status: Gateway / Working Normally / Clock 2000MHz
Issues/Errors: None, confirmed Switch Config tab working as expected

Thanks, BrainSlayer!
_________________
Netgear R9000
DD-WRT v3.0-r55779 std (04/12/24)
Linux 4.9.337 #721 SMP Mon Apr 8 08:07:27 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps

abhijitat
DD-WRT User

Joined: 06 Feb 2020
Posts: 167
Location: Maharashtra, India

Posted: Fri May 28, 2021 14:54 Post subject:

Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r46788 std (05/28/21)
Kernel: Linux 4.9.269 #209 SMP Fri May 28 01:54:43 +07 2021 armv7l
File/Upload: dd-wrt-webupgrade.bin / Upload using SSH
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r46772 std (05/26/21)
Setup Using: PPPOE, 2.4 GHz, 5.0 GHz, IPv4, DNSMasq, NTP TimeSync, Samba

Status: Working Fine running vanilla firmware type for 2.4ghz & 5ghz, uptime 15 Min, Samba Share still needs password even if set as public.
Switch Config tab working on R7800.

will update the post if any errors observed

Thank you BrainSlayer for Wonderful firmware.

Thanks all Guru for your help in forums.

Molle
DD-WRT User

Joined: 13 Jan 2015
Posts: 123
Location: Finland

Posted: Fri May 28, 2021 16:32 Post subject:
Router/Version: Netgear R7800 Previous/Reset: r46690 (CLI update) / No Status: OK Issues: None so far DD-WRT firmware on 5 GHz (WDS AP), Vanilla on 2.4 GHz (AP). Router/Version: Linksys EA8500 Previous/Reset: r46690 (CLI update) / No Status: OK Issues: None so far DD-WRT firmware on 5 GHz (WDS Station), 2.4 GHz disabled.

tatsuya46
DD-WRT Guru

Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

Posted: Fri May 28, 2021 22:13 Post subject:

BrainSlayer wrote:

we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55797 std
[QUALCOMM] DIR-862L --------------------------------> r55797 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std

Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

Zyxx
DD-WRT Guru

Joined: 28 Dec 2018
Posts: 737

Posted: Sat May 29, 2021 10:13 Post subject:
Router/Version: Netgear R7800 File: dd-wrt-webupgrade Firmware: DD-WRT v3.0-r46788 std (05/28/21) (prev. DD-WRT v3.0-r46733 std (05/21/21)) Kernel: Linux 4.9.269 #209 SMP Fri May 28 01:54:43 +07 2021 armv7l Mode: Gateway, 2.4G and 5G wifi, 1VAP @2.4G with different SSID, Wireguard for external access, WAN to 4G, Keep Alive reboot 6:02 in the morning Reset: No Status: Ok, 2:32h up.

xraive
DD-WRT User

Joined: 08 Mar 2016
Posts: 134

Posted: Sat May 29, 2021 14:36 Post subject:

Router Model / Version: Linksys EA8500
Previous Firmware:DD-WRT v3.0-r46750 std (05/25/21)
Current Firmware:DD-WRT v3.0-r46788 std (05/28/21)
File:: dd-wrt-webupgrade.bin / CLI Flash (easyddup.sh)
Kernel: Linux 4.9.269 #207 SMP Thu May 27 15:18:19 +07 2021 armv7l
Reset: No
Wireless: Wireless Mode - Client, Firmware Type - DD-WRT
Routing: Operating - Gateway
Setup: SFE, NTP, DDNS (inadyn-Entware),
Services: DNSMasq (GUI+ additional options on USB Syslog, SSH, FreeRadius, Telnet, USB, ProFTPD (with users), Samba (with users), CoovaChilli (with local users & radius), WiFiDog,
Administration:Remote Access (HTTPS & SSH), Startup Script (For DNSMasq & inadyn)
Uptime: 19:40, load average: 0.00, 0.03, 0.01
Temperature: CPU 57.224 °C / wlan0 48 °C / wlan1 50 °C
Status: OK
Issues: None

All good with this build. Thanks once again BS.

MLandi
DD-WRT Guru

Joined: 04 Dec 2007
Posts: 1018

Posted: Sat May 29, 2021 15:02 Post subject:

Stable for 26 hours, no issues at all.
_________________
Netgear R9000
DD-WRT v3.0-r55779 std (04/12/24)
Linux 4.9.337 #721 SMP Mon Apr 8 08:07:27 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps

bushant
DD-WRT Guru

Joined: 18 Nov 2015
Posts: 2036

Posted: Sat May 29, 2021 22:19 Post subject:

Netgear R7500v2
DD-WRT v3.0-r46788 std (05/28/21)
Linux 4.9.269 #208 SMP Fri May 28 01:45:27 +07 2021 armv7l

CLI upgrade no reset over r46780

Working fine with DD-WRT, wlan0 WDS Sta w/wlan0 VAP & wlan1 AP, SMB,ProFTPD, Entware, Fat32 & ext2
ondemand, up_threshold 35
_________________
Forum Guide Lines (with helpful pointers about how to research your router, where and what firmware to download, where and how to post and many other helpful tips!)
How to get help the right way
Before asking for help - Read the forum guidelines AND Upgrade DD-WRT!
Adblock by eibgrad (1.1M blocked) + Blocklist Collection

mrjcd
DD-WRT Guru

Joined: 31 Jan 2015
Posts: 6285
Location: Texas

Posted: Sat May 29, 2021 23:43 Post subject:

well shitdarn I thought we was all good but I reckon the silly ath10k:
firmware ver 10.4-ddwrt-9980-tW-13-6144M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 5506e25d
went to some far away place after 1 day little over 8hrs --- the 2.4 ... NO broadcast --NO nothing.
My 3 chromecast, couple desktops, & couple tablets all on 2.4 just went to shit, dead in the water.
Evil or Very Mad

The 5GHz was perfectly fine and doing what she is supposed to.
Anyways I switched both radios to the 'VANILLA' firmware and 2.4 came alive so we will see how she does after day or so.

bit of dmesg:

Code:

[ 34.575241] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
[ 34.977861] Linux kernel CIFS/SMB SERVER 3.3.9 by Namjae Jeon <linkinjeon@kernel.org>
[ 35.345336] IMQ: use 2 as queue number
[ 35.352508] IMQ driver loaded successfully. (numdevs = 16, numqueues = 2, imq_dev_accurate_stats = 1)
[ 35.352535] Hooking IMQ after NAT on PREROUTING.
[ 35.360813] Hooking IMQ before NAT on POSTROUTING.
[ 38.301395] br1: port 1(wlan0.1) entered learning state
[ 52.301880] br1: port 2(vlan4) entered learning state
[ 53.301584] br1: port 1(wlan0.1) entered forwarding state
[ 67.301876] br1: port 2(vlan4) entered forwarding state
[116562.979985] device wlan0.1 left promiscuous mode
[116562.980133] br1: port 1(wlan0.1) entered disabled state
[116562.992798] device vlan4 left promiscuous mode
[116562.994627] br1: port 2(vlan4) entered disabled state
[116563.034230] br0: port 3(wlan1) entered disabled state
[116563.034400] br0: port 2(wlan0) entered disabled state
[116563.038429] br0: port 1(vlan1) entered disabled state
[116563.054878] device wlan1 left promiscuous mode
[116563.055021] br0: port 3(wlan1) entered disabled state
[116563.059226] device wlan0 left promiscuous mode
[116563.063517] br0: port 2(wlan0) entered disabled state
[116563.068505] device vlan1 left promiscuous mode
[116563.073057] device eth0 left promiscuous mode
[116563.077623] br0: port 1(vlan1) entered disabled state
[116563.525787] ath10k_pci 0000:01:00.0: No VIF found for vdev 1
[116563.525812] ath10k_pci 0000:01:00.0: no vif for vdev_id 1 found
[116563.559492] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 1
[116563.559545] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 1
[116563.565358] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 1
[116563.678991] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 0
[116563.679048] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 0
[116563.684809] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 0
[116563.828924] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 0
[116563.828963] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 0
[116564.396091] device br0 entered promiscuous mode
[116564.531095] br0: port 1(vlan1) entered blocking state
[116564.531125] br0: port 1(vlan1) entered disabled state
[116564.535501] device vlan1 entered promiscuous mode
[116564.540335] device eth0 entered promiscuous mode
[116564.545167] br0: port 1(vlan1) entered blocking state
[116564.549881] br0: port 1(vlan1) entered forwarding state
[116564.564428] device br0 left promiscuous mode
[116564.567052] device br0 entered promiscuous mode
[116564.630905] device br0 left promiscuous mode
[116564.694825] ath: EEPROM regdomain: 0x8348
[116564.694831] ath: EEPROM indicates we should expect a country code
[116564.694835] ath: doing EEPROM country->regdmn map search
[116564.694840] ath: country maps to regdmn code: 0x3a
[116564.694844] ath: Country alpha2 being used: US
[116564.694847] ath: Regpair used: 0x3a
[116564.694852] ath: regdomain 0x8348 dynamically updated by user
[116564.694867] ath: EEPROM regdomain: 0x8348
[116564.694870] ath: EEPROM indicates we should expect a country code
[116564.694873] ath: doing EEPROM country->regdmn map search
[116564.694877] ath: country maps to regdmn code: 0x3a
[116564.694880] ath: Country alpha2 being used: US
[116564.694882] ath: Regpair used: 0x3a
[116564.694886] ath: regdomain 0x8348 dynamically updated by user
[116564.704424] ath10k_pci 0000:01:00.0: user requested fw restart
[116564.794163] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0-vanilla/firmware-6.bin failed with error -2
[116565.032818] ath10k_pci 0000:01:00.0: found firmware features ie (4 B)
[116565.032852] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[116565.038316] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[116565.049741] ath10k_pci 0000:01:00.0: firmware ver 3.15-00018 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps,peer-fixed-rate crc32 663fd9e8
[116565.113930] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
[116565.113964] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[116565.123587] ath10k_pci 0000:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=2'
[116565.132802] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 792a3d38
[116565.162400] ath10k_pci 0000:01:00.0: boot already acquired valid otp board id,skip download, board_id 2 chip_id 1
[116565.182953] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 11241
[116566.330446] ath10k_pci 0000:01:00.0: Init Max Stations to 512
[116566.404784] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:06:39:fd status 0
[116566.435015] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[116569.608061] ath10k_warn: 1 callbacks suppressed
[116569.608073] ath10k_pci 0000:01:00.0: wmi command 36872 timeout, restarting hardware
[116569.611778] ath10k_pci 0000:01:00.0: ani_enable failed from debugfs: -11
[116569.648450] ath10k_pci 0000:01:00.0: cannot restart a device that hasn't been started
[116569.895846] ath10k_pci 0000:01:00.0: boot get otp board id result 0x00008800 board_id 2 chip_id 1 ext_bid_support 0
[116569.916426] ath10k_pci 0000:01:00.0: boot upload otp to 0x1234 len 11241
[116571.066836] ath10k_pci 0000:01:00.0: Init Max Stations to 512
[116571.140372] ath10k_pci 0000:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:06:39:fd status 0
[116571.264672] ath10k_pci 0000:01:00.0: bdf failsafe status event received from fw: 0
[116571.272832] br0: port 2(wlan0) entered blocking state
[116571.272854] br0: port 2(wlan0) entered disabled state
[116571.277089] device wlan0 entered promiscuous mode
[116571.282129] br0: port 2(wlan0) entered blocking state
[116571.286750] br0: port 2(wlan0) entered forwarding state
[116571.292405] br0: port 2(wlan0) entered disabled state
[116573.395212] br0: port 2(wlan0) entered blocking state
[116573.395244] br0: port 2(wlan0) entered forwarding state
[116573.406763] br1: port 1(wlan0.1) entered blocking state
[116573.406794] br1: port 1(wlan0.1) entered disabled state
[116573.411588] device wlan0.1 entered promiscuous mode
[116573.423800] br1: port 1(wlan0.1) entered blocking state
[116573.576749] ath10k_pci 0001:01:00.0: user requested fw restart
[116573.669106] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0-vanilla/firmware-6.bin failed with error -2
[116573.669147] ath10k_pci 0001:01:00.0: found firmware features ie (4 B)
[116573.679470] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
[116573.685981] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[116573.697440] ath10k_pci 0001:01:00.0: firmware ver 3.15-00018 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps,peer-fixed-rate crc32 663fd9e8
[116573.761485] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
[116573.761517] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[116573.771154] ath10k_pci 0001:01:00.0: boot using board name 'bus=pci,bmi-chip-id=1,bmi-board-id=1'
[116573.780483] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 792a3d38
[116573.809793] ath10k_pci 0001:01:00.0: boot already acquired valid otp board id,skip download, board_id 1 chip_id 1
[116573.830221] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 11241
[116574.976423] ath10k_pci 0001:01:00.0: Init Max Stations to 512
[116575.049194] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:06:39:fd status 0
[116575.078780] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[116578.257917] ath10k_pci 0001:01:00.0: wmi command 36872 timeout, restarting hardware
[116578.257971] ath10k_pci 0001:01:00.0: ani_enable failed from debugfs: -11
[116578.298156] ath10k_pci 0001:01:00.0: cannot restart a device that hasn't been started
[116578.485456] ath10k_pci 0001:01:00.0: boot get otp board id result 0x00008400 board_id 1 chip_id 1 ext_bid_support 0
[116578.505874] ath10k_pci 0001:01:00.0: boot upload otp to 0x1234 len 11241
[116579.649159] ath10k_pci 0001:01:00.0: Init Max Stations to 512
[116579.720154] ath10k_pci 0001:01:00.0: wmi event ready sw_version 0x01000000 abi_version 3 mac_addr c0:56:27:06:39:fd status 0
[116579.837300] ath10k_pci 0001:01:00.0: bdf failsafe status event received from fw: 0
[116579.844748] br0: port 3(wlan1) entered blocking state
[116579.844776] br0: port 3(wlan1) entered disabled state
[116579.849401] device wlan1 entered promiscuous mode
[116580.536925] br0: port 3(wlan1) entered blocking state
[116580.536956] br0: port 3(wlan1) entered forwarding state
[116580.801254] br1: port 2(vlan4) entered blocking state
[116580.803609] br1: port 2(vlan4) entered disabled state
[116580.808968] device vlan4 entered promiscuous mode
[116580.813812] br1: port 2(vlan4) entered blocking state
[116580.819194] br1: port 2(vlan4) entered blocking state
[116580.941213] ksmbd: kill command received
[116581.705317] Linux kernel CIFS/SMB SERVER 3.3.9 by Namjae Jeon <linkinjeon@kernel.org>
[116593.302100] br1: port 1(wlan0.1) entered learning state
[116600.301518] br1: port 2(vlan4) entered learning state
[116608.301416] br1: port 1(wlan0.1) entered forwarding state
[116615.301582] br1: port 2(vlan4) entered forwarding state
root@Citadel-Station-Homeworld:~# uptime
18:27:04 up 1 day, 8:29, load average: 0.03, 0.04, 0.00
root@Citadel-Station-Homeworld:~# date
Sat May 29 18:27:06 CDT 2021
root@Citadel-Station-Homeworld:~#
Connection to citadel-station-homeworld.mrjcd.com closed.
mrjcd@Fat-Deb:~$

jwieland
DD-WRT User

Joined: 31 May 2018
Posts: 72

Posted: Sat May 29, 2021 23:50 Post subject:

Router/Version: Netgear R7800
File/Kernel: DD-WRT v3.0-r46788 std (05/28/21)
Previous/Reset: r46772/cli erase nvram
Mode/Status: Operational
Issues/Errors: Vanilla firmware for both radios
Uptime: about 30 hours

Had to switch to vanilla firmware to get my wireless-N clients to have reasonable download speeds. N on 2.4Ghz would yield less than 10Mbps down - N on 5Ghz wasn't much better. The AC clients seem happy with on 5Ghz radio with vanilla.
_________________
Netgear R9000
Netgear R7800 (spare)
Linksys WRT1200ac v2 (spare)

Display posts from previous:

Page 1 of 1

DD-WRT Forum Index -> Atheros WiSOC based Hardware

All times are GMT

Navigation

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Log in

New Build - 05/28/2021 - r46788

Quick Links

Log in