New Build - 05/16/2021 - r46681

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14126
Location: Texas, USA

PostPosted: Sun May 16, 2021 11:51    Post subject: New Build - 05/16/2021 - r46681 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r46640 (GitHub mirror)

Notes:
OpenVPN 2.5.2: Guides, Server, PBR, Reverse PBR, Client (see second post), Kill Switch, update tips, scripts and more.
WireGuard 1.0.20210219/Tools: Guides, Client, Server, Advanced, PBR, KS, update tips, scripts & more. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• Broadcom MIPS devices are now on kernel 4.4. • Support added for TP-Link Archer C8 v2 and v3.
SmartDNSMiniDLNA • Unbound 1.13.1 • CoovaChilli 1.6 • Tor 0.4.5.7 • OpenSSL 1.1.1k • Dnsmasq 2.85 • Privoxy 3.0.32
In-kernel Samba (ksmbd 3.3.9+): default min/max versions changed. • WSD updateANTFS/NTFS3 kernel mode driver++.
Added CTF (Cut Through Forwarding) and swconfig support to Broadcom devices.
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587, & CVE-2020-24588 (Fragattack) fixed.

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs in 40562 - 40566. Effective startup commands discussion thread is here.
If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
Show us your findings with steps to reproduce, configuration, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Sponsor
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 301
Location: Maine, USA

PostPosted: Sun May 16, 2021 12:36    Post subject: Reply with quote
Router/Version: Asus RT-N12D
File: dd-wrt.v24-#####_NEWD-2_K3.x_mega.bin
Firmware: DD-WRT v3.0-r46681 mega (05/16/21)
Kernel: Linux 4.4.268 #8997 Sun May 16 14:53:50 +07 2021 mips
Mode: Gateway/OpenVPN client
Previous: r46442
Reset?: N
Status: Not working. Still no WAN IP address, plus now router crashes when WIFI connects. Ethernet ports do work.

I've attached the crash and boot.



crash.txt
 Description:

Download
 Filename:  crash.txt
 Filesize:  20.5 KB
 Downloaded:  123 Time(s)

saphirely
DD-WRT User


Joined: 13 Dec 2020
Posts: 266

PostPosted: Sun May 16, 2021 15:53    Post subject: Reply with quote
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r46681 std (05/16/21)
Kernel: Linux 4.4.268 #3066 SMP Sun May 16 03:42:22 +07 2021 armv7l
Mode: Gateway, Wireless AP, unbound
Reset: No
Previous : r46640
Upgrade: Web and 1st succeed without reset.
Temperatures CPU 74.7 °C / WL1 52.5 °C
Load: 0.11, 0.11, 0.07
Uptime 6 min

On the other hand,
Setup-=>Basic Setup-=>
Short Forwarding Engine SFE (default) which support WAN 1GB
Flow Acceleration Disable (Default) changed to CTF or CTF+FA
93.96M 93.49 94.10/94.82
34.30M 34.46 34.43/34.47
Zyxx
DD-WRT Guru


Joined: 28 Dec 2018
Posts: 733

PostPosted: Sun May 16, 2021 16:06    Post subject: Reply with quote
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r46681 std (05/16/21) (prev. DD-WRT v3.0-r46666 std (05/14/21))
Kernel: Linux 4.4.268 #3066 SMP Sun May 16 03:42:22 +07 2021 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: Ok, 1:51h up.

Router/Version: Asus RT-N66U
File: dd-wrt.v24-46681_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: dd-wrt.v24-46681_NEWD-2_K3.x-big-RT-N66U.trx (prev. DD-WRT v3.0-r46380 big (04/17/21))
Kernel: no access
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: Yes did reset itself, no GUI, only ASUS mini CFE Server.
Status: I reverted the firmware to r46380.
Tried three times flashing the new release with tftp or mini CFE. Tried one time after revert to old firmware (tftp, wait 10 minutes, reboot and reset NVRAM via WPS). Always resulting in reset after 5 bootfails (as configured) and no GUI - TTL 100 and reboot.
Unfortunately I was not able to access the console ... my debug cable isn't at home, will provide further information soon.
tedm
DD-WRT Guru


Joined: 13 Mar 2009
Posts: 554

PostPosted: Sun May 16, 2021 21:15    Post subject: Reply with quote
Router/Version: Netgear AC1450
File/Kernel: Linux 4.4.268 #3004 SMP Thu May 13 16:14:18 +07 2021 armv7l
Previous/Reset: No
Mode/Status: OK
Issues/Errors: None so far

Please let me know if this post needs to be moved into a build thread in the ARM category.

Factory reset device after updating

Only issue noted so far is that after finishing configuring it and powercycling the device it did not boot up completely it got "stuck" I had to power cycle it again then it came up. Also after about the 3rd soft reboot from the command line it "stuck" once more and I had to power cycle it to get it to come up.

Of course this could be hardware but I have not noted an issue with this hardware and power supply before. I have a couple others of these and so will test with those to see if they do the same thing.
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 951

PostPosted: Sun May 16, 2021 21:28    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.268 #3066 SMP Sun May 16 03:42:22 +07 2021 armv7l
Previous/Reset: DD-WRT v3.0-r46640 std (05/13/21) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + USB Storage + lighttpd + cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
MysticGold04
DD-WRT User


Joined: 20 Apr 2018
Posts: 174
Location: Somewhere remote

PostPosted: Sun May 16, 2021 21:37    Post subject: Reply with quote
Router/Version: Asus RT-AC68U rev B1
Kernel: Linux 4.4.268 #3066 SMP Sun May 16 03:42:22 +07 2021 armv7l
Previous: r46604 (05/09/21)
Mode: Client Bridge x3
Status: Working - No issues
Uptime: 20min
Upgrade: via GUI
Reset: No

_________________
ASUS RT-AC3100 AP Merlin 386.12_4
ASUS RT-AC68U Media Bridge/Merlin 386.12_4 (x2)
ASUS RT-AC68U AP r54604
ASUS RT-AC68U Gateway/AP r54604
Edgerouter-4, v2.0.9-hotfix7
Huike
DD-WRT Novice


Joined: 10 Sep 2016
Posts: 17

PostPosted: Sun May 16, 2021 22:42    Post subject: Reply with quote
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r46681 std (05/16/21) (prev. DD-WRT v3.0-r46666 std (05/14/21))
Kernel: Linux 4.4.268 #3066 SMP Sun May 16 03:42:22 +07 2021 armv7l
Mode: Gateway, WAN is DHCP client with VLAN tagging 10
Reset: No
Status: Issue. This version r46681 and the previous version r46640 have an issue: it can not get an IP address from my ISP. The router is Netgear R7000. Using VLAN tag 10 as required by my ISP. Have to roll back to version r46446.
flyzipper
DD-WRT Guru


Joined: 21 Feb 2016
Posts: 504

PostPosted: Sun May 16, 2021 23:14    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r46681 std (05/16/21)
Kernel: Linux 4.4.268 #3066 SMP Sun May 16 03:42:22 +07 2021 armv7l
Previous: r46640
Mode/Status: Gateway / working
Issues/Errors: Working well so far.

Uptime: 56mins
Upgrade: via web UI, no issues
Reset: no
Temperatures: CPU 69.1 °C / WL0 47.0 °C / WL1 53.0 °C
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 353
Location: Szczecin, Poland EU

PostPosted: Mon May 17, 2021 7:51    Post subject: New Build - 05/16/2021 - r46681 Reply with quote
Router/Version: Netgear WNR3500L v2
Kernel: Linux 4.4.268 #8981 Sun May 16 14:37:01 +07 2021 mips
Reset: No
Mode: Internet gateway, WIFI AP, Dnsmasq server
Errors: Many warnings and errors in log
Status: Working
Uptime: ~ 10h

I'm flash device via ssh. Generally router working. I have many bugs, errors and warnings in log. New CTF function is difficult to configure. When CTF is on internet connection speed is slow. When SFE is disable internet connection is slow too. I'm stay with original SFE. Any builds after APR 24, 2021 are for debug in my opinion.

Quote:
Jan 1 01:00:14 Myrouter kern.warn kernel: Found a AMD NAND flash with 2048B pages or 128KB blocks; total size 128MB
Jan 1 01:00:14 Myrouter kern.warn kernel: Primary instruction cache 32kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes.
Jan 1 01:00:14 Myrouter kern.warn kernel: Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Jan 1 01:00:14 Myrouter kern.warn kernel: PCI: no core
Jan 1 01:00:14 Myrouter kern.warn kernel: PCI: no core
Jan 1 01:00:14 Myrouter kern.warn kernel: PCI: Fixing up bridge
Jan 1 01:00:14 Myrouter kern.warn kernel: PCI: Fixing up bus 0
Jan 1 01:00:14 Myrouter kern.err kernel: pflash: found no supported devices
Jan 1 01:00:14 Myrouter kern.warn kernel: ERROR: Unknown flash, device_id:0x00
Jan 1 01:00:14 Myrouter kern.err kernel: bcmsflash: found no supported devices
Jan 1 01:00:14 Myrouter kern.warn kernel: Boot partition size = 524288(0x80000)
Jan 1 01:00:14 Myrouter kern.warn kernel: lookup_nflash_rootfs_offset: offset = 0x500000
Jan 1 01:00:14 Myrouter kern.warn kernel: nf_conntrack_rtsp v0.7 loading
Jan 1 01:00:14 Myrouter kern.warn kernel: nf_nat_rtsp v0.7 loading
Jan 1 01:00:14 Myrouter kern.warn kernel: et_module_init: passivemode set to 0x0
Jan 1 01:00:14 Myrouter kern.warn kernel: et_module_init: txworkq set to 0x0
Jan 1 01:00:14 Myrouter kern.warn kernel: et_module_init: et_txq_thresh set to 0xce4
Jan 1 01:00:14 Myrouter kern.warn kernel: et_module_init: et_rxlazy_timeout set to 0x3e8
Jan 1 01:00:14 Myrouter kern.warn kernel: et_module_init: et_rxlazy_framecnt set to 0x20
Jan 1 01:00:14 Myrouter kern.warn kernel: et_module_init: et_rxlazy_dyn_thresh set to 0
Jan 1 01:00:14 Myrouter kern.warn kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.164.18 (r692288)
Jan 1 01:00:14 Myrouter kern.err kernel: roboswitch: error (-14) while accessing MII phy registers with ioctls
Jan 1 01:00:14 Myrouter kern.err kernel: roboswitch: No such device
Jan 1 01:00:14 Myrouter kern.err kernel: roboswitch: No such device
Jan 1 01:00:14 Myrouter kern.err kernel: roboswitch: No such device
Jan 1 01:00:14 Myrouter kern.warn kernel: wl: module license 'Proprietary' taints kernel.
Jan 1 01:00:14 Myrouter kern.warn kernel: Disabling lock debugging due to kernel taint
Jan 1 01:00:14 Myrouter kern.warn kernel: bcm_robo_config_vlan_fun vid=1, vlan->members=0x11e, vlan->untag=0x1e
Jan 1 01:00:14 Myrouter kern.warn kernel: bcm_robo_config_vlan_fun ports=1 2 3 4 8t
Jan 1 01:00:14 Myrouter kern.warn kernel: bcm_robo_config_vlan_fun vid=2, vlan->members=0x101, vlan->untag=0x101
Jan 1 01:00:14 Myrouter kern.warn kernel: bcm_robo_config_vlan_fun ports=0 8
Jan 1 01:00:14 Myrouter kern.warn kernel: mii_wreg: cannot access MII registers through pseudo phy interface
Jan 1 01:00:14 Myrouter kern.warn kernel: mii_wreg: cannot access MII registers through pseudo phy interface
Jan 1 01:00:14 Myrouter kern.warn kernel: mii_wreg: cannot access MII registers through pseudo phy interface
Jan 1 01:00:14 Myrouter kern.warn kernel: mii_wreg: cannot access MII registers through pseudo phy interface
Jan 1 01:00:14 Myrouter kern.warn kernel: mii_wreg: cannot access MII registers through pseudo phy interface
Jan 1 01:00:14 Myrouter kern.warn kernel: mii_wreg: cannot access MII registers through pseudo phy interface
Jan 1 01:00:15 Myrouter kern.warn kernel: mii_wreg: cannot access MII registers through pseudo phy interface
Jan 1 01:00:15 Myrouter kern.warn kernel: mii_wreg: cannot access MII registers through pseudo phy interface
Jan 1 01:00:15 Myrouter kern.warn kernel: bcm_robo_config_vlan_fun vid=1, vlan->members=0x118, vlan->untag=0x18
Jan 1 01:00:15 Myrouter kern.warn kernel: bcm_robo_config_vlan_fun ports=3 4 8t
Jan 1 01:00:15 Myrouter kern.warn kernel: bcm_robo_config_vlan_fun vid=2, vlan->members=0x101, vlan->untag=0x1
Jan 1 01:00:15 Myrouter kern.warn kernel: bcm_robo_config_vlan_fun ports=0 8t
Jan 1 01:01:11 Myrouter daemon.err httpd[1603]: httpd : Request Error Code 401: Authorization required. Wrong username and/or password!
May 17 00:13:44 Myrouter kern.warn kernel: br0: received packet on eth1 with own address as source address
May 17 00:16:47 Myrouter kern.warn kernel: br0: received packet on eth1 with own address as source address
May 17 09:26:30 Myrouter daemon.err httpd[1603]: httpd : Request Error Code 401: Authorization required. Wrong username and/or password!
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Mon May 17, 2021 19:47    Post subject: Reply with quote
i see no bugs. just expected messages
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum