Seems To Flash fine- then hijacked?

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
lilyatchy
DD-WRT Novice


Joined: 13 May 2021
Posts: 1

PostPosted: Fri May 14, 2021 1:48    Post subject: Seems To Flash fine- then hijacked? Reply with quote
I flashed no problem, and was prompted to enter a new username and password. That goes fine then I'm sent to the portal. Pressing any section either takes me to a blank cannot connect page, or briefly allows me some action before sending me to this page.

When it has me enter my new admin/password upon creating it, I can access the portal. I am able to ping the IP steadily.

30-30-30 resets everything and again I'm able to set a new password. I got further into the setting the secodn time around until promptly getting booted again.

I'm using a Netgear 7000 with the newest beta build.

When given the screen

"This site can’t be reachedThe connection was reset.
Try:

Checking the connection
Checking the proxy and the firewall
ERR_CONNECTION_RESET"

it doesn't ask for the login. I refreshed, etc, tried to reset 30-30-30 multiple times.

The weird thing is that in the middle of typing this, I went back to the tab and it was showing the portal again, but immediately selecting any options or navigating brings me back to the connection reset blank screen.

I'm using this CFW for security as I've been struggling with nuisanced breeches from a neighbor. I'm plugged into ethernet.

Thanks guys! Any tips?

Oh, it seems I may be in the wrong section... I assumed this to fall under general help?
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 7943
Location: Netherlands

PostPosted: Fri May 14, 2021 6:37    Post subject: Reply with quote
Welcome to the forum

This is not the right place, but no worries I will transfer it for you.

Forums have stickies and announcements (the top of the forums) they are very informative.

See in this forum the third topic:
STOP!-READ FIRST: This area is NOT for router help! READ!

See also:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=325589, a lot of problems stem from the use of Chrome or chromium based browsers or incompatible browser extensions!!

and of course the first post:
Forum guidelines and pointers, READ THIS FIRST!
see: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087

Latest beta can mean a lot that is why it is helpful to state the actual build number, as of today it is 46640.

30-30-30 reset is not a good idea on Broadcom Arm routers

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
WireGuard Documents & Guides:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327397
OpenVPN Documents & Guides: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327398
IPSET: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327261
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
usergay
DD-WRT Novice


Joined: 26 Apr 2012
Posts: 11

PostPosted: Fri May 14, 2021 7:44    Post subject: Re: Seems To Flash fine- then hijacked? Reply with quote
lilyatchy wrote:
I flashed no problem, and was prompted to enter a new username and password. That goes fine then I'm sent to the portal. Pressing any section either takes me to a blank cannot connect page, or briefly allows me some action before sending me to this page.

When it has me enter my new admin/password upon creating it, I can access the portal. I am able to ping the IP steadily.

30-30-30 resets everything and again I'm able to set a new password. I got further into the setting the secodn time around until promptly getting booted again.

I'm using a Netgear 7000 with the newest beta build.

When given the screen

"This site can’t be reachedThe connection was reset.
Try:

Checking the connection
Checking the proxy and the firewall
ERR_CONNECTION_RESET"

it doesn't ask for the login. I refreshed, etc, tried to reset 30-30-30 multiple times.

The weird thing is that in the middle of typing this, I went back to the tab and it was showing the portal again, but immediately selecting any options or navigating brings me back to the connection reset blank screen.

I'm using this CFW for security as I've been struggling with nuisanced breeches from a neighbor. I'm plugged into ethernet.

Thanks guys! Any tips?

Oh, it seems I may be in the wrong section... I assumed this to fall under general help?


Sounds like it could be a bad / corrupt flash. Try flashing "DD-WRT v3.0-r46446 std (04/24/21)" as it has been the latest stable build for me on my r7000 thus far.

As others have suggested... Clear your browser's cookies and cache or try different browsers to rule out any stale pages that could be causing issues. Do not do a 30-30-30 on the r7000 as it can cause more damage than good.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 9543
Location: Texas, USA

PostPosted: Fri May 14, 2021 13:55    Post subject: Reply with quote
Also, do not intermingle router access with surfing the internet. People still do this and wonder why they have issues. #peopledonotunderstandhowbrowserswork
_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 210
Location: Szczecin, Poland EU

PostPosted: Sat May 15, 2021 17:22    Post subject: Reply with quote
If you can configure login data it mean you have clean dd-wrt installation. If you have problems after type new login data you can try to 30 - 30 - 30 reset. After this you should totally clean web browser cache. Switch on your device and wait to start. Connect rj45 cable to port number 1, other ports should be empty. Open web browser and make all new configuration. Now GUI of your device should working good. I think it's problem with your web browser.
feliciano
DD-WRT Guru


Joined: 24 Oct 2008
Posts: 1010
Location: Latin America

PostPosted: Sun May 16, 2021 0:32    Post subject: Re: Seems To Flash fine- then hijacked? Reply with quote
lilyatchy wrote:
it has me enter my new admin/password upon creating it, I can access the portal.

Just in case, the user is not "admin", it's "root".

_________________
If you want support, please read first the announcements and forum rules.
Si usted desea ayuda, por favor lea primero los anuncios y las reglas del foro.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum