Also, what are the speeds you are getting and what were you expecting? You can use iPerf3 for testing your network which is mentioned in the link above as well.
Lastly, can you try providing us the channel/site survey images thru a different way? I am unable to increase the zoom without making it blurry for those images. _________________ DD-WRT Router Arsenal:
....
Lastly, can you try providing us the channel/site survey images thru a different way? I am unable to increase the zoom without making it blurry for those images.
Sorry about the images. uploaded them here
https://we.tl/t-sg2piVZN0a
please let me know if you have any issues
This setting is only available to routers with QCA99xx chipsets.
This is a completely experimental setting and has been found to significantly lower channel quality and add extra network overhead to perform TDMA. Your client must have the ability to take advantage of this feature. Right now, DON'T play with this unless you really know what you are doing; you will impact the wifi network and spectrum of other devices in the radius of the router using Q-boost. Initial testing shows this feature starts off fine, and then starts to impact wifi & spectrum in a negative fashion (Floods the network & spectrum with overhead noise).
Posted: Sun May 09, 2021 20:54 Post subject: Channel Survey and Site Survey
The Channel Survey and Site Survey you attached are for the 5GHz spectrum, not 2.4GHz. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
Posted: Mon May 10, 2021 0:30 Post subject: 2.4GHz & 5GHz Channel
I would use Channel 11 and lower for 2.4GHz.
How do you have more 5GHz networks in range than 2.4GHz? That is the first time I have seen that. 5GHz channel requires 4 non-overlapping channels, 149-161 for example for VHT 80. I don't see how that would be possible in that environment. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
Last edited by ian5142 on Sun May 23, 2021 11:21; edited 1 time in total
Posted: Sun May 23, 2021 2:37 Post subject: Re: 2.4GHz & 5GHz Channel
ian5142 wrote:
I would use Channel 11 and lower for 2.4GHz.
How do you have more 2.4GHz networks in range than 5GHz? That is the first time I have seen that. 5GHz channel requires 4 non-overlapping channels, 149-161 for example for VHT 80. I don't see how that would be possible in that environment.
Looked into it, Refreshing the page seemed to include more networks.