E4200 running an old kong version

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
ElBalsero
DD-WRT Novice


Joined: 10 Feb 2018
Posts: 4

PostPosted: Thu May 06, 2021 12:04    Post subject: E4200 running an old kong version Reply with quote
Hi all,

My old E4200 has been running DD-WRT v24-sp2 (06/07/14) kingkong
(SVN revision 22000M) for years and years.

I use it as AP and it has been working flawlessly since I installed this version in 2015 or something like that.

Now I have got another two E4200 routers that I would like to use also as AP. My plan was to flash them with exactly the same version which I know that works perfect for me, make a backup of my router, and restore it in the new ones after the flashing is finalised.

To my surprise I see that the Kong branch is deprecated and the repository shut down, and I cannot get the firmware anymore.

I could of course try new versions and see if they work as I need. But I remember that to find this one I tried quite a few others that did not work as expected, or were not as stable or so... it was a long process and I could save it if I simply use this version which I know that covers all my needs.

So I have thought about two possibilities and I hope that perhaps you can help me:

1.- Do you guys know if there is any mirror or old repository or whatever place where I can still get that kong version? Perhaps any of you has the firmware file?

2.- My router is actually running that version. Is there any procedure to dump the firmware out of the router creating a firmware flashable file that I can use to flash the other routers?

Or perhaps anyone has a suggestion that I have not thought about.

In any case, I thank you all in advance for your help.

Daniel
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12837
Location: Netherlands

PostPosted: Thu May 06, 2021 12:08    Post subject: Reply with quote
Consider using 46446, how and where to download see the forum guidelines

To get the best out of DDWRT and the forum read the forum guidelines with helpful pointers:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
ElBalsero
DD-WRT Novice


Joined: 10 Feb 2018
Posts: 4

PostPosted: Thu May 06, 2021 12:28    Post subject: Reply with quote
egc wrote:
Consider using 46446, how and where to download see the forum guidelines


Thanks a lot for the advice, egc. I would rather go for the same version that I know it works. But if the things came to that being not possible, I would definitely have a look to the one you are recommending. At least I know where to start looking in that case.

Still I hope that someone can help me to get the version I have.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12837
Location: Netherlands

PostPosted: Thu May 06, 2021 12:48    Post subject: Reply with quote
You are running a very old version which has known security problems so it is not safe to run this version if the router is connected to the internet, you have been warned!
_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
ElBalsero
DD-WRT Novice


Joined: 10 Feb 2018
Posts: 4

PostPosted: Thu May 06, 2021 13:03    Post subject: Reply with quote
egc wrote:
You are running a very old version which has known security problems so it is not safe to run this version if the router is connected to the internet, you have been warned!


Thanks for the heads up, egc. Point taken.
Those routers are not the ones that are connected to the internet but repeaters inside the house. I assume that it is a bit of a better situation but not totally safe in any case. Still, it is something I can live with.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Thu May 06, 2021 15:17    Post subject: Reply with quote
http://ddwrt.stevejenkins.com/builds/

I would consider upgrading to 46446 as well, but there you go.

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
ElBalsero
DD-WRT Novice


Joined: 10 Feb 2018
Posts: 4

PostPosted: Thu May 06, 2021 18:59    Post subject: Reply with quote
kernel-panic69 wrote:
http://ddwrt.stevejenkins.com/builds/

I would consider upgrading to 46446 as well, but there you go.


Thanks a lot for the link, kernel-panic69. Also for the advise.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum